DLM1 type multi plate electromagnetic clutchDetailed product description：

The DLM1 multi disc electromagnetic clutch is suitable for dry or wet environments and is an actuator used in mechanical transmission systems to combine or separate the driving and driven parts of the rotating motion through electromagnetic force operation, thereby achieving power and motion transmission
The standard operating voltage of the clutch is 24 volts DC In general, a simple circuit composed of ordinary electrical components such as switches, buttons, contactors, and travel switches can easily achieve automatic and remote control, thereby meeting various requirements of mechanical transmission systems such as speed change, direction change, starting, and positioning.
This series of clutches belongs to a structural form where the magnetic flux does not pass through the friction plate group, resulting in low residual torque and fast action time after short circuiting. Especially suitable for use in situations where action time is required. When the friction plate wears to a certain extent during use and the torque decreases, the working air gap needs to be adjusted.

The DLM1 multi plate electromagnetic clutch can operate reliably under the following conditions:
(1) In a medium without explosive hazards, and without gases or conductive dust that can corrode metals and damage insulation.
(2) Wet clutch needs to work under the condition of lubricating oil, while dry clutch cannot work in an environment affected by grease
(3) The voltage fluctuation of the clutch coil shall not exceed the rated voltage of+5% and -15%.
(4) The altitude of the clutch installation location should not exceed 2000 meters.