1. Overview:

JG-5 photoelectric relay is an electronic device used for automation control. It consists of three parts: the photoelectric relay itself, the transmitting head GTF-5, and the receiving head GTS-5. When the light beam projected by the transmitting head on the receiving head is blocked by a moving object in between, the working state of the relay changes. Therefore, it can indicate whether the workpiece being processed exists or is located. This type of photoelectric relay can be widely used in electrical transmission control systems in industries such as metallurgy, machine manufacturing, textiles, and papermaking.

2. Model parameters:
1. Power supply: AC 50HZ220V15%. (380V ± 15% available, requires separate order)
2. The relay can reliably operate within a distance of 5M between the head and receiver.
3. When the input current of the transistor amplifier is less than 30uA, the relay should not operate. When it is greater than 40uA, the relay should operate reliably.
4. This photoelectric circuit breaker provides two sets of switchable normally open and normally closed contacts, with a contact breaking capacity of DZ144 DC 100V1AJQX-4 AC 220V 3A (resistive).

JG-5, JG-5Q series photoelectric relay