J116 series six digit mechanical counterDetailed product description：

Working principle and introduction:
The J116 series six bit counter is a mechanical rotary counter. Drive the drive shaft and use the internal gear mechanism to drive the counting wheel for decimal addition counting. The drive shaft rotates counterclockwise once, and the count values accumulate by 1, 2, 5, and 10. Press the reset button on the left to instantly reset the number on the counting wheel to zero. The J116 series six digit counter can be used to measure the rotational speed of various machinery, as well as to measure length, depth, flow rate, etc., and is therefore widely used in industries such as machinery, wire production, tape production, and printing. It is an essential tool for measurement and recording.

Product series and related technical parameters:

model	J116-001	J116-002	J116-004
Display numerical specifications	Height x Width 4 mm x 2.5 mm
Operating Temperature	-10℃～+50℃
Maximum cumulative computing capacity	nine hundred and ninety-nine thousand nine hundred and ninety-nine
transmission ratio	1:1	1:2	1:5
rated speed	≤1000r/min	≤500r/min	≤500r/min
torque	≤3N·cm
weight	About 70g
Can be designed and produced according to customer needs

Product installation dimension diagram:

J116 series six digit mechanical counter