JL055B Type Five Bit Pull CounterDetailed product description：

Working principle and introduction:

The JL055B five digit pull counter is used to record the number of mechanical reciprocating movements. Pull the lever of the counter, and the push plate connected to the lever pushes the ratchet on the number wheel to perform decimal addition counting. The counter is equipped with a zeroing mechanism. Rotate the reset handle to reset all the accumulated numbers in the counter to zero. This counter is mainly used in industries such as machinery, circuit breakers, printing, and high and low voltage switches.

Product series and related technical parameters:

model	JL055B	JL055B	JL055M	JL055ZB	JL055ZM
Display numerical specifications	Height x Width 4 mm x 2 mm
Operating Temperature	-10℃～+50℃
Maximum cumulative computing capacity	ninety-nine thousand nine hundred and ninety-nine
transmission ratio	1:1
Counting speed	≤ 250 times/minute
Pull angle	Maximum pull angle 37o, minimum pull angle 38o
torque	≤8 N·cm
characteristic	Pull right, pull the lever clockwise		Pull right, pull the lever counterclockwise	Pull left, pull the lever clockwise	Pull left, pull the lever counterclockwise
weight	About 72g

Installation dimension diagram of JL055B five position pull counter:

JL055B Five Position Pull Counter