JL085 Type Five Bit Pull CounterDetailed product description：

Working principle and introduction:
The JL085 five position pull counter is used to accumulate and record the number of mechanical reciprocating movements, without a reset mechanism. When the count reaches 99999, you can start the next cycle from 00000. The counting wheel of the counter is driven by internal teeth. When the counter lever is pulled, the propulsion mechanism connected to the lever causes the counting wheel to perform addition counting. This type of counter is mainly used in high-voltage switchgear products, and can also be applied to testing equipment, printing equipment, etc.

Product series and related technical parameters:

model	JL085	JL085-B	JL085ZM
Display numerical specifications	Height x Width 4 mm x 2 mm
Operating Temperature	-10℃～+50℃
Maximum cumulative computing capacity	ninety-nine thousand nine hundred and ninety-nine
transmission ratio	1:1
Counting speed	≤ 300 times/minute	≤ 300 times/minute	≤ 300 times/minute
Pull angle	Maximum pull angle 41o, minimum pull angle 37o
torque	≤4.18 N·cm
characteristic	Pull right, pull the lever counterclockwise	Pull right, pull the lever clockwise	Pull left, pull the lever counterclockwise
weight	About 23g

Product installation dimension diagram:

JL085 Five Position Pull Counter