1、 Scope of application
The LW2 series universal transfer switch is suitable for various switch devices in electrical equipment with AC and DC voltages up to 220V and below. It can be used as a transfer switch for various electrical instruments, servo motors, and micro motors. It can be installed on metal plates and insulation plates in distribution boxes, control systems, or other devices, and can be used in vertical, horizontal, and inclined directions.

3、 Technical data of LW2 series universal transfer switch
1. The rated current of the switch contact is 10A, and the rated voltage is 220V (when the current does not exceed 0.1A, it is allowed to be used in 380V circuits).  
The operating frequency of the transfer switch should not exceed 10 times per hour, and the breaking current should not exceed 50% of the accident current in the table.  
3. The signal contacts are 1A, 10=20, 30=40, and 50, with a contact capacity of 10% of the signal measured in the table.  
4. The handle with signal signal has a bulb capacity of 115V and 8W.

LW2 series universal conversion switch