DYZ series integral hydraulic puller (integrated hydraulic puller)Detailed product description：

The DYZ integrated wheel puller (integrated hydraulic puller) uses hydraulic starting rod to move forward directly, so the pushing rod itself does not transmit power, and the hook and claw seat can be adjusted forward and backward directly with the thread. It is easy to operate, as long as the handle is swung back and forth slightly. Effortless to use, anti slip, not limited by site, direction (0-360 °), position (2 claws, 3 claws), widely used for disassembling various discs, flanges, gears, bearings, pulleys, etc. It is an ideal tool to replace traditional Lamar.

Specification and form number	DYZ-5	DYZ-10	DYZ-20	DYZ-30	DYZ-50
Maximum working capacity (T)	five	ten	sixteen	twenty-five	forty-five
Single work trip (mm)	sixty	sixty	sixty	sixty	one hundred
Three claw adjustment range (mm)	50-250	50-300	100-400	150-500	200-550
Work pressure Mpa	forty	sixty-three	sixty-three	sixty-three	seventy