SYD desktop small ultrasonic cleaning machineDetailed product description：

The SYD series small ultrasonic cleaning machine is an integrated desktop type with a beautiful appearance and a compact and reasonable structure. It is suitable for applications such as electronic, light industry, medical, chemical, biological, household, jewelry, eyes, laboratory inspection, cleaning, extravagance, crushing, neutralization, and extraction.

Technical parameters of desktop small ultrasonic cleaning machine

model	power	Power supply HZ	Inner net size mm	Frequency KHZ
SYD-80	80W	AC220V	175×135×85	have twenty-eight forty for selection
SYD-120	120W	AC220V	230×140×100
SYD-250	250W	AC220V	310×180×250
SYD-400	400W	AC220V	330×250×280

Principle of Ultrasonic Cleaning
The ultrasonic electrical control part (commonly known as the generator) transmits electrical energy signals to the transducer (also known as the oscillator), which converts high-frequency oscillating electrical signals into high-frequency mechanical oscillations and radiates them in the form of longitudinal waves in the cleaning solution (water, oil or solvent). During the half wave period of radiation wave expansion, the density of the cleaning solution is destroyed and countless bubbles with diameters of 50-500um are formed. This type of bubble is filled with solution vapor, and during the half wave of compression, the bubble quickly closes and bursts, producing a local hydraulic impact of hundreds of Mpa (similar to a nuclear explosion). This phenomenon is called the "cavitation" effect. Under the continuous "cavitation" effect, the dirt on the surface, patterns or more concealed holes of the cleaned product is cracked and peeled off. At the same time, under the action of ultrasonic waves, the penetration force of the cleaning solution is strengthened, and the pulsating stirring is intensified, dissolved, rapidly decomposed and floated, thus thoroughly cleaning the product parts.

Characteristics of Ultrasonic Cleaning
Using ultrasonic cleaning can quickly and thoroughly remove various oil stains, debris, and powder impurities from product parts:
Can clean dirt with patterns, grooves, curved holes, holes, and blind holes;
There is no damage to the surface of the product;
Various suitable cleaning solutions can be used first to selectively remove the dirt that needs to be cleaned;
Cleaning work can be carried out at room temperature or appropriate heating (usually around 60 ° C);
Save energy, workspace, and reduce labor intensity;
The fast and qualified cleaning efficiency is tens of times higher than manual cleaning by human labor