F116C Digital multimeterDetailed product description：

Detailed information
Fluke 116C temperature and microampere current measurement HVAC multimeter

Technical Specifications
Maximum voltage between any terminal and ground	600v
surge protection	6 kV peak, according to IEC 61010-1 600 V CAT III; Pollution level 2
display	Number: 6000 words, update speed 4/second
bar chart	33 segments, update speed 32/s
Operating Temperature	-10 ° C to+50 ° C
Storage temperature	-40 ° C to+60 ° C
Battery Type	9 V alkaline battery, NEDA 1604A/ IEC 6LR61
battery life	400 hours (typical value), no backlight illumination

Accuracy technical specifications
DC mV	Range: 600.0 mV Resolution: 0.1 mV Accuracy: ± ([% reading]+[words]): 2.0%+3
DC V	Range/Resolution: 6.000 V/0.001 V Range/Resolution: 60.00 V/0.01 V Range/Resolution: 600.00 V/0.1 V
Automatic voltage selection	Range 600.0 V Resolution: 0.1 V Accuracy: 2.0%+3 (DC, 45 Hz to 500 Hz) 4.0%+3 (500 Hz to 1 kHz)
Millivolt AConeTrue RMS	Range: 600.0 mV Resolution: 0.1 mV Accuracy: 1.0%+3 (DC, 45 Hz to 500 Hz) 2.0%+3 (500 Hz to 1 kHz)
AC voltageoneTrue RMS	Range/Resolution: 6.000 V/0.001 V Range/Resolution: 60.00 V/0.01 V Range/Resolution: 600.0 V/0.1 V Accuracy 1.0%+3 (DC, 45 Hz to 500 Hz) 2.0%+3 (500 Hz to 1 kHz)
continuity	Range 600 Ω Resolution: 1 Ω Accuracy: The sound alarm is turned on when it is less than 20 ohms and turned off when it is greater than 250 ohms; Detect open or short circuits at 500 μ s or longer.
resistor	Range/Resolution: 600.0 ohms/0.1 ohms Range/Resolution: 6.000 k Ω/0.001 k Ω Range/Resolution: 60.00 k Ω/0.01 k Ω Range/Resolution: 600.0 k Ω/0.1 k Ω Range/Resolution: 6.000 M Ω/0.001 M Ω Accuracy: 0.9%+1 Range/Resolution: 40.00 M Ω/0.01 M Ω Accuracy: 1.5%+2
Diode testing	Range/Resolution: 2.000 V/0.001 V Accuracy: 0.9%+2
capacitance	Range/Resolution: 1000 nF/1 nF Range/Resolution: 10.00 μ F/0.01 μ F Range/Resolution: 100.0 μ F/0.1 μ F Range/Resolution: 9999 μ F/1 μ F Range/Resolution: 100 μ F to 1000 μ F Accuracy: 1.9%+2 Range/Resolution:>1000 μ F Accuracy: 5%+20%
Low input impedance	Range: 1 nF to 500 μ F Accuracy: 10%+2 (typical)
temperaturetwo(K-type thermocouple)	Range/Resolution: "-40 ° C to 400 ° C/0.1 ° C Accuracy: 1%+102 Range/Resolution: "-40 ° F to 752 ° C/0.2 ° F Accuracy: 1%+182
Effective Value of Communication μ A (45 Hz to 500 Hz)	Range/Resolution: 600.0 μ A/0.1 μ A Accuracy: 1.0%+2
DC μ A	Range/Resolution: 600.0 μ A/0.1 μ A Accuracy: 1.0%+2
Frequency (voltage or current input)two	Range/Resolution: 99.99 Hz/0.01 Hz Range/Resolution: 999.99 Hz/0.1 Hz Range/Resolution: 9.999 Hz/0.001 Hz Range/Resolution: 50.00 Hz/0.01 Hz Accuracy: 0.1%+2

Note:
1) Except for Auto-V LoZ measurement, all AC ranges are specified within the range of 1% to 100% of the range. The Auto-V LoZ is specified as 0V. Since no input voltage lower than 1% of the range is specified, it is normal for this instrument or other true RMS instruments to display a non-zero reading when the test line is disconnected from the circuit or when two test lines are connected together and a short circuit occurs. For voltage measurement, the peak coefficient is ≤ 3 at 4000 bits; When full, the peak coefficient linearly decreases to 1.5. AC voltage is AC coupled. The automatic voltage LoZ and AC mV are DC coupled.  
2) Temperature error (accuracy) does not include the error of thermocouple probes.
3) The frequency is AC coupled, and for AC voltage, the frequency ranges from 45 Hz to 50 kHz.  

Mechanical and General Technical Specifications
size	Height: 167 x 84 x 46 mm
weight	0.55 kg
warranty period	3 years