HomeYour location:HomeHigh voltage electrical applianceshigh-voltage transformer35KV current transformer → LZZBJ8-35W1B type current transformer
Column tabs 
Product name: LZZBJ8-35W1B type current transformer
specification: LZZBJ8-35W1B type current transformer
  Zoom Zoom in on the image
Category: High voltage electrical appliances -- 35KV Current Transformer
Column tabs 
Price: factory price
Brand: Shanghai
Place of Origin: China
Column tabs 
Available Quantity: batch
delivery cycle: Spot goods (or inquire by telephone)
tabs
  Shanghai Beiyuan Industry and Trade Co.,Ltd
+86-21-66770508
+86-139101609058

Email 91way@163.com
Wechat 13916500500(Wechat)


LZZBJ8-35W1B type current transformerDetailed product description:Column tabs
LZZBJ8-35W1B current transformer is suitable for precise electrical measurement and relay protection in power systems with an altitude of 1000m and below, a rated frequency of 50Hz, and a maximum operating voltage of 40.5kV and below.
Environmental temperature: The normal type is+40 ℃~-15 ℃; The plateau type ranges from+25 ℃ to -15 ℃.
Environmental humidity: The daily average relative humidity should not exceed 95%, and the monthly average should not exceed 90%; The daily average saturated vapor pressure shall not exceed 2.2 × 10-3MPa, and the monthly average shall not exceed 1.8 × 10-3MPa.
Product type: Indoor.
Atmospheric conditions: There is no pollution or explosive medium in the installation site that seriously affects the insulation of the transformer.
The installation site has no severe vibrations or bumps.
Open circuit is not allowed during product operation, otherwise there is a high voltage hazard.
The temperature during transportation and storage ranges from+40 ℃ to -15 ℃.
When using the product, the equipotential lead wire should be reliably connected to the high-voltage bus.

Technical parameters of LZZBJ8-35W1B current transformer

Product execution standard: GB1208-1997 "Current Transformers".
Rated insulation level: 40.5/95/185kV.
Rated secondary current: 5A and 1A.
Instrument security factor: 0.2S level FS ≤ 5; Level 0.2 and 0.5 FS ≤ 10.
Insulation and heat resistance grade: Grade E.
Secondary structure: two coils, three coils, four coils.
The rated secondary lower limit load is 25% of the rated secondary load.
The rated primary current value, rated secondary load, accurate limit coefficient, rated short-time current value, level combination, and weight are listed in the following table. Please consult with the manufacturer for special specification products.

Rated primary current (A)
Rated secondary load (VA) COS ∧=0.8
5P, 10P accurate limit coefficient
1S short
Time heat
current
(KA)
rated
Dynamic stability
Constant current (KA)
0.2S
zero point two
zero point five
5P、10P
5P
10P
1A
5A
1A
5A
1A
5A
1A
5A
1A
5A
1A
5A
twenty
ten
ten
ten
ten
fifteen
fifteen
fifteen
fifteen
fifteen
The
twenty
fifteen
fifteen
The
twenty
200I1n
/1S
500I1n
thirty
forty
fifty
seventy-five
one hundred
one hundred and fifty
31.5KA
/1S
eighty
two hundred
three hundred
31.5kA/2S
eighty
four hundred
31.5kA
/4S
one hundred and thirty
five hundred
six hundred
fifteen
ten
fifteen
ten
thirty
15\20
seven hundred and fifty
twenty
twenty
twenty
twenty
one thousand
twenty
twenty
one thousand two hundred and fifty
thirty
20. 30
one thousand and five hundred
thirty
thirty
forty
thirty
40kA
/4S
one hundred and thirty


LZZBJ8-35W1B type current transformer

LZZBJ8-35W1B type current transformer
Product Category
All product information on this website is translated by Baidu machine translation, which may not be completely accurate and is only for reference