QKT27-100/250 General driver controllerDetailed product description：

Scope of application and working conditions:

The QKT27-100/250 mining general type driver controller (old model QKT27-2/2TH) is used for 3-ton overhead line type resistance speed regulating locomotives, as well as for locomotive starting speed regulation, stopping, and reversing. Among them, QKT27-2 is a general type, and QKT27-2TH is a warm type.

The general driver controller for QKT27-2 industrial and mining electric locomotives is suitable for the following working environments:

1. Altitude not exceeding 1200M (to be negotiated with the user if exceeded).
2. The ambient temperature is -20 ℃ -+40 ℃ (when the monthly average temperature is+25 ℃).
3. The relative humidity of the surrounding air should not exceed 90%.
4. A place without combustible gas and coal dust explosion mixture.
5. There are no harmful gases that can damage insulation and corrode metals.
6. On devices with rain, snow, and splash protection.
7. When tilted within 10 degrees relative to the normal position
8. Has an impact acceleration of no more than 30m/s2 relative to the longitudinal direction of the locomotive.
9. A sinusoidal vibration with a frequency f of 2-50HZ relative to the longitudinal, transverse, and vertical directions of the locomotive, with an amplitude A not greater than:
2≤f≤10HZ A=25/f（mm）
10≤f≤50HZ A=250/f2(mm)
10. Installed in the driver's control room of the XK3T battery powered mining electric locomotive.

Technical parameters:

1. Rated voltage: 250V (DC);
2. Rated current: 100A;
3. The contact surface of the contact shall not be less than 80% of the total length in the contact direction.
4. The alignment difference between the contacts should not exceed 1mm.
5. The contact opening distance is greater than 8mm.
6. Initial contact pressure>14.7N
7. Contact final pressure>29.4N