GCB-DT Type 1kV Cold Shrink TerminalDetailed product description：

Product Features:
Using a unique formula of highly elastic silicone rubber as insulation material, silicone rubber has many advantages as external insulation:
1. The most resistant to suspended chemical pollutants, not easy to stick to dust, resistant to high temperatures, acid and alkali corrosion.
2. Natural anti ultraviolet and anti-aging ability.
3. Good insulation performance, difficult to generate conductive carbide channels, excellent anti creepage performance, and insulation regeneration ability.
4. It is a hydrophobic substance that can maintain high surface resistance.
5. Has hydrophobic recovery function.
Cold shrink installation method, easy to install:
Peel off the cable and fix the cold shrink end according to the specified size, extract the support strip and install it.
Product Usage
Used for connecting indoor or outdoor low-voltage cables (terminals or intermediate joints), as well as for the outgoing lines of motors below 6kV. One model is suitable for multiple wire diameters. And ensure excellent waterproofing, insulation, and mechanical strength. Due to the elongation of the insulation tube, it is particularly suitable for connecting cables and distribution cabinets
Product selection table:

Product Name:
1kV cold shrink terminal, intermediate joint, (single core, three core, four (3+1) core, five (3+2, 4+1) core)
Product Model:
GCB-DT (Terminal)

Product Features:

Using a unique formula of highly elastic silicone rubber as insulation material, silicone rubber has many advantages as external insulation:
1. The most resistant to suspended chemical pollutants, not easy to stick to dust, resistant to high temperatures, acid and alkali corrosion.
2. Natural anti ultraviolet and anti-aging ability.
3. Good insulation performance, difficult to generate conductive carbide channels, excellent anti creepage performance, and insulation regeneration ability.
4. It is a hydrophobic substance that can maintain high surface resistance.
5. Has hydrophobic recovery function.
Cold shrink installation method, easy to install:
Peel off the cable and fix the cold shrink end according to the specified size, extract the support strip and install it.

Product Usage

Used for connecting indoor or outdoor low-voltage cables (terminals or intermediate joints), as well as for the outgoing lines of motors below 6kV. One model is suitable for multiple wire diameters. And ensure excellent waterproofing, insulation, and mechanical strength. Due to the elongation of the insulation tube, it is particularly suitable for connecting cables and distribution cabinets

Product selection table:

Product Name	Product Model	voltage level	Application cable cross-section (mm)two)
Cold shrink terminal	GCB-DT0	1kV	25-35
	GCB-DT1		50-70
	GCB-DT2		95-120
	GCB-DT3		150-240
	GCB-DT4		three hundred

Note: According to customer needs, the maximum cross-sectional area of the applied cable can reach 800 mm2

Product performance

Serial number	name	Cold shrink cable terminal
one	model	GCB-DT
two	Nominal voltage (kV):	0.6/1
three	Maximum allowable continuous operating voltage (kV):	one point two
four	Normal operating temperature (℃)	ninety
five	Temperature during short circuit (℃)	two hundred and fifty
six	transmission capacity	Consistent with the cable
seven	Short circuit capacity	Consistent with the cable
eight	Creepage distance ratio	Greater than 3.1cm/kV
nine	Implement standards for connecting with devices	GB/T 14315
ten	Height (length)	According to customer requirements
eleven	The short-circuit current allowed to pass through the grounding part	Not less than the selected cable
twelve	Weight (kg/piece)	1.5kg/set