HomeYour location:Homewire and cablecable accessoriesterminal lug → J-GCB-D type 1kV cold shrink intermediate joint
Column tabs 
Product name: J-GCB-D type 1kV cold shrink intermediate joint
specification: J-GCB-D type 1kV cold shrink intermediate joint
  Zoom Zoom in on the image
Category: wire and cable -- terminal lug
Column tabs 
Price: factory price
Brand: Shanghai
Place of Origin: China
Column tabs 
Available Quantity: batch
delivery cycle: Spot goods (or inquire by telephone)
tabs
  Shanghai Beiyuan Industry and Trade Co.,Ltd
+86-21-66770508
+86-13371811002

Email 91way@163.com
Wechat 13371811002(Wechat)


J-GCB-D type 1kV cold shrink intermediate jointDetailed product description:Column tabs
J-GCB-D (intermediate joint)

Characteristics of J-GCB-D 1kV cold shrink intermediate joint:

Using a unique formula of highly elastic silicone rubber as insulation material, silicone rubber has many advantages as external insulation:
1. The most resistant to suspended chemical pollutants, not easy to stick to dust, resistant to high temperatures, acid and alkali corrosion.    
2. Natural anti ultraviolet and anti-aging ability.  
3. Good insulation performance, difficult to generate conductive carbide channels, excellent anti creepage performance, and insulation regeneration ability.  
4. It is a hydrophobic substance that can maintain high surface resistance.  
5. Has hydrophobic recovery function.  
Cold shrink installation method, easy to install:
Peel off the cable and fix the cold shrink end according to the specified size, extract the support strip and install it.  

Purpose:
J-GCB-D type 1kV cold shrink intermediate joint is used for connecting indoor or outdoor low-voltage cables (terminals or intermediate joints), as well as for the outgoing lines of motors below 6kV. One model is suitable for multiple wire diameters. And ensure excellent waterproofing, insulation, and mechanical strength. Due to the elongation of the insulation tube, it is particularly suitable for connecting cables and distribution cabinets  

J-GCB-D type 1kV cold shrink intermediate joint selection table:

Product Name

Product Model

voltage level

Application cable cross-section (mm2)

Cold shrink terminal

GCB-DT0

1kV

25-35

GCB-DT1

50-70

GCB-DT2

95-120

GCB-DT3

150-240

GCB-DT4

three hundred

Cold shrink intermediate joint

J-GCB-D0

25-35

J-GCB-D1

50-70

J-GCB-D2

95-120

J-GCB-D3

150-240

J-GCB-D4

three hundred


Note: According to customer needs, the maximum cross-sectional area of the applied cable can reach 800 mm2

Product performance

Serial number

name

Cable intermediate joint

one

model

J-GCB-D

two

Nominal voltage (kV):

0.6/1

three

Maximum allowable continuous operating voltage (kV):

one point two

four

Normal operating temperature (℃)

ninety

five

Temperature during short circuit (℃)

two hundred and fifty

six

transmission capacity

Consistent with the cable

seven

Short circuit capacity

Consistent with the cable

eight

Creepage distance ratio

---------

nine

Implement standards for connecting with devices

GB/T 14315

ten

Height (length)

According to customer requirements

eleven

The short-circuit current allowed to pass through the grounding part

Not less than the selected cable

twelve

Weight (kg/piece)

1kg/set

J-GCB-D type 1kV cold shrink intermediate joint
Product Category
All product information on this website is translated by Baidu machine translation, which may not be completely accurate and is only for reference