YJQT,YJHT European 630A shielded front/rear connectorDetailed product description：

YJQT， YJHT
Product Introduction:
YJQT, YJHT European 630A shielded front/rear connectors are used for cable distribution boxes, ring main units, box transformers, etc. It is a three-layer special rubber fully shielded product. Used for fully sealed connection of sockets with diameters of 46/56/91.5/M16. Suitable for cable cross-sections of 25-500mm2.
The rear connector is installed behind the front connector and connected to the front connector using a conductive connecting rod, which can achieve multi branch power supply with high tightening force and reliable current flow.

YJQT, YJHT European 630A shielded front/rear connector features:
1. It is a fully insulated, fully shielded, and fully sealed product.
2. Introducing advanced post injection insulation layer technology, with higher electrical performance indicators, safer and more reliable use.
After the assembly of the front and rear joints, the center distance is only 100mm, which not only fully meets the installation space requirements of the ring main unit, but also further reduces the structural dimensions of the cable distribution box.
A 2mm thick uniform outer shielding layer with a grounding resistance of less than 1000 Ω.
5. Increased the interference fit between the stress cone and the cable insulation layer, avoiding breathing and electrophoretic effects.
6. Carefully researched special rubber formula ensures that the stress cone and body can still be separated after long-term installation without damage.
7. 100% factory testing, stable quality

YJQT, YJHT Euro 630A Shielded Front/Rear Connectors Suitable Voltage Levels: 8.7/15kV, 12/24kV, 18/30kV