1、 Characteristics:
The LXW12 micro switch has the characteristics of easy installation, quick action, forced disconnection, large breaking capacity, and modularity. Suitable for control circuits or auxiliary circuits with AC 380V (50Hz) or DC 220V or below (using categories AC-15, DC-13), used for controlling travel, signal transmission or interlocking. It can also be used in main circuits such as non inductive or low inductive loads, resistance furnaces, etc. (using category AC-1) for connection or disconnection.
The product has a pair of quick switching contacts. The lead wire of the micro switch adopts a standard socket, which is convenient, fast, and reliable for wiring. The size and performance of the plug (i.e. micro switch lead wire) and socket comply with IEC standards. And corresponding numbers of sockets can be equipped for users.
The switch can be equipped with rollers or other auxiliary driving components according to user requirements.

2、 Code agreement:
LXW □ - □□□ - □ Type
① ②③④ ⑤

① Model number

② Contact type
11: A pair of conversion contacts
10: A pair of normally closed contacts
01: A pair of normally open contacts
③ Transmission shaft type
O: Button type
GL: Long leverage type
GS: Short leverage type
LL: Long roller type
LS: Short roller type
R: Type of wiring terminal for R-type transmission shaft ④
1: Welding terminals
2: Plug in terminal
3: Screw type terminal
4: Lead out wire terminal

⑤ Special purpose
T: Heat resistant
H: Moisture proof
Note 2: Contact type

11: A pair of conversion contacts 10: a pair of normally closed contacts 01: a pair of normally open contacts

3、 LXW12 micro switch external dimensions:

4、 Main parameters:
Rated voltage: AC 380V DC 250V Operating stroke: 1-1.5MM
Agreed heating current: 22A differential stroke: ≤ 0.5MM
Conversion time: 40MS or less Overtravel: ≥ 0.5MM
Action force: 3.5-4N Mechanical lifespan: 10 million cycles
Reset force: ≥ 0.5N Electrical (at rated value):>300000 times