JDJ(J)2-35 series voltage transformerDetailed product description：

The JDJ (J) 2-35 series voltage transformer is a single-phase oil immersed product suitable for use in power systems with a rated frequency of 50Hz or 60Hz and a rated voltage of 35kV for energy metering, voltage monitoring, and relay protection. This product complies with the standards of IEC60044-2 and GB1207 "Voltage Transformers".


3、 Structure Introduction
The core of the JDJ (J) 2-35 series voltage transformer is made of stacked strip silicon steel sheets and is a three column core type. The body of the transformer is fixed to the box cover with iron clips, and primary and secondary sleeves are installed on the box cover. The oil tank is welded with steel plates, and the lower part of the tank wall is equipped with grounding bolts and oil drain plugs. There are four installation holes at the bottom of the tank.

4、 Technical parameters
1. Technical parameter table

model	Rated voltage ratio (kV)	Accurate level combination	rated output (VA)	Extreme output (VA)	Rated insulation level (kV)
JDJ2-35	35/0.1	zero point two zero point five one	seventy-five one hundred and fifty two hundred and fifty	one thousand	40.5/95/200
JDJJ2-35	35/√3/0.1/√3/0.1/3	0.2/6P(3P) 0.5/6P(3P) 1/6P(3P)	75/100 150/100 250/100
	35/√3/0.1/√3/0.1/√3/0.1/3	0.2/0.2/6P(3P) 0.2/0.5/6P(3P) 0.5/0.5/6P(3P)	30/30/100 30/60/100 60/60/100	2×500

JDJ (J) 2-35 series voltage transformer