SSR-40VA single-phase resistive solid-state voltage regulatorDetailed product description：

Optoelectronic isolation between the control circuit and the load circuit.
Controllable silicon output, zero current shutdown.
Voltage zero crossing opens.
Equipped with a resistance capacitance absorption circuit.
Control signals are compatible with TTL logic; Optional safety cover.
Rectangular in shape, encapsulated with epoxy resin (module).
Suitable radiators should be equipped during use, and forced air cooling should be strengthened if necessary.
The three-phase starting characteristics are consistent.
Flame retardant engineering plastic shell, metal bottom plate

Widely applicable: such as industrial electric furnaces, ovens, water pumps, electric motors, electrical switchgear, automation control equipment, etc

The following are the parameters of a single-phase resistive solid-state voltage regulator (solid-state voltage regulator):

model		SSR-10VA SSR-15VA SSR-25VA SSR-40VA SSR-60VA SSR-80VA
lose enter ginseng number	Control (with added potentiometer)	330KΩ-510KΩ/2W
	input current	/
	Work instructions	/
	On-off time	≤ 10mS (milliseconds)
	Reliable shutdown voltage	Less than 0.8VDC
lose go out ginseng number	output voltage	Communication 24-220VAC, Communication 24-380VAC
	Rated working current	10A.15A.25A.40A.60A.80A.
	On state pressure drop	≤1.5V
	Minimum conduction current	50mA
	Off state leakage current	Less than 10mA
sex can ginseng number	Dielectric Strength	2500VAC， 1 minute
	insulation voltage	≥2500V
	insulation resistance	≥100MΩ
	Operating Temperature	—35～75 ℃
	power frequency	50/60HZ
	Heat dissipation conditions	≥ 25A with radiator, ≥ 40A with fan for strong cooling
	Load current safety factor	Resistive load is 2-4 times, inductive load is 3-5 times
	Overall dimensions	105.0L×74.0W×33.0H
	weight	100g

SSR-40VASSR single-phase resistive solid-state voltage regulator external dimensions and installation wiring diagram: (unit: mm)

SSR-40VA single-phase resistive solid-state voltage regulator