Shanghai Huabang Industrial Business Network - power tools

[power tools]FYMP-125 Busbar embossing machine

2026-4-22 15:07:59

Purpose: FYMP-125 busbar embossing machine is used for copper and aluminum busbar embossing points
Features: Easy to operate, convenient, and fast

Technical Specifications:

Model number	FYMP-125×12
Maximum applicable range of mother meridian mm	125×12
Rated pressure Mpa	sixty-three
Travel distance mm	twenty-five
Weight KG	fifty-three

[power tools]FDJ series cable pay off rack

2026-4-22 15:07:53

Purpose:
FDJ series cable pay off rack is used to support cable reels during line construction, with one machine for multiple purposes

Technical parameters of FDJ series cable pay off rack:

model	FDJ-1	FDJ-2	FDJ-3	FDJ-4
Applicable disk diameter m	two point six	two point four	two	one point five
Self weight kg	one hundred and twenty-six	one hundred and eight	eighty	eighty-five

[power tools]DC Series Docking Multi purpose Operating Rod

2026-4-22 15:07:46

1. DC Series Docking Multi purpose Operating Rod Description:
The DC series high-voltage operating rod (switching rod) is one of the commonly used safety tools in electrical equipment switching operations. The product is developed and produced in accordance with the technical requirements of the national standard "GB13398-92 General Technical Conditions for Live Working Insulated Rod" of the People's Republic of China, and has all passed the type test of the National Electric Safety Tool Quality Supervision Inspection and Testing Center. The DC series docking type high-voltage multi-purpose operating rod is used for opening and closing high and low voltage switches, disassembling fuses, tightening screws, and other operations. It is suitable for voltage levels of 10, 35, 110, 220, and 500KV. The environmental conditions for the use of this product are: ambient temperature: -25 to+55 ��; Relative humidity: �� 90%.

DC Series Docking Multi purpose Operating Rod

DC Series Docking Multi purpose Joystick -1

2. Specification Table of Operating Rod

serial number	Product name	Model	unit	remark
one	Docking type high-voltage multi-purpose operating rod	DC-35 type	Pay	Two section total length of 2M
two	Docking type high-voltage multi-purpose operating rod	DC-35A type	Pay	2�� Three section total length of 3M
three	Docking type high-voltage multi-purpose operating rod	DC-110 type	Pay	Three section style with a total length of 4M
four	Docking type high-voltage multi-purpose operating rod	DC-220 type	Pay	Three section design with a total length of 4.5M
five	Docking type high-voltage multi-purpose operating rod	DC-220A type	Pay	Three section style with a total length of 5M
six	Telescopic High Voltage Multipurpose Operating Rod	DC-35 type	Pay	Two section total length of 2M
seven	Telescopic High Voltage Multipurpose Operating Rod	DC-110 type	Pay	Two section total length of 3M
eight	Telescopic High Voltage Multipurpose Operating Rod	DC-110 type	Pay	Three section total length of 3M
nine	Telescopic High Voltage Multipurpose Operating Rod	DC-220 type	Pay	Three section style with a total length of 4M
ten	Telescopic High Voltage Multipurpose Operating Rod	DC-220 type	Pay	Three section design with a total length of 4.5M
eleven	Direct discharge rod	ZF-1 type	Pay	Pole 1M with copper wire 25mm 2 × 5M

3. DC series high-voltage multi-purpose operating lever parameters

Serial number	Single section length (m)	Number of sections	Grip length (m)	Rod diameter (mm)
one	one	two	zero point eight zero	��29
two	one	three	zero point eight zero	��29
three	one	three	zero point eight zero	��32
four	one	four	zero point eight zero	��32
five	one point five	two	one	��29
six	one point five	two	one	��32
seven	one point five	three	one	��32
eight	one point five	four	one	��32
nine	two	one	one	��29
ten	two	two	one	��32
eleven	two	three	one	��32
twelve	two	four	one	��32

3.1 Product Structure Parameter Regulations

Rated voltage (KV)	Shortest effective insulation length (m)	The length of the end metal joint shall not exceed (m)	The grip length shall not be less than (m)
ten	zero point seven zero	zero point one zero	zero point six zero
thirty-five	zero point nine zero	zero point one zero	zero point six zero
sixty-three	one	zero point one zero	zero point six zero
one hundred and ten	one point three zero	zero point one zero	zero point seven zero
two hundred and twenty	two point one zero	zero point one zero	zero point nine zero
three hundred and thirty	three point two zero	zero point one zero	one
five hundred	four point one zero	zero point one zero	one

3.2 Electrical Performance Regulations for Products

rated voltage ��KV��	Distance between experimental electrodes ��m��	The breakdown voltage of the power frequency internal network shall not be less than ��KV��	1-minute power frequency withstand voltage ��KV��
ten	zero point four zero	one hundred and twenty	one hundred
thirty-five	zero point six zero	one hundred and eighty	one hundred and fifty
sixty-three	zero point seven zero	two hundred and ten	one hundred and seventy-five
one hundred and ten	one	three hundred	two hundred and fifty
two hundred and twenty	one point eight zero	five hundred and ten	four hundred and fifty

Rated voltage (KV)	Distance between experimental electrodes (m)	5-minute power frequency withstand voltage (KV)	Operating impulse withstand voltage (KV)
three hundred and thirty	two point eight zero	four hundred and twenty	nine hundred
five hundred	three point seven zero	six hundred and forty	one thousand one hundred and seventy-five

3.3 Mechanical Performance Regulations for Products

load type	Allowable load value		Minimum destructive load value
	Nominal diameter of operating rod (mm)		Nominal diameter of operating rod (mm)
	28 and below	Above 28	28 and below	Above 28
Bending moment N · m	��90	��110	��270	��330
Stretching force N	��600		��1800
Twisting torque N · m	��30		��90

4. Usage and precautions
Telescopic operating lever
4.1 To ensure the safety of personnel and equipment, the operating lever should be stored in a dedicated location with dry air circulation.
4.2 The use of operating rods on electrical equipment should comply with the relevant provisions of the electrical safety work regulations.
Before use, the corresponding voltage level qualified operating lever should be selected according to the rated voltage of the electrical equipment for operation.
5. Regular testing
5.1 The operating lever must undergo regular preventive tests according to the time limit specified in the electrical safety engineering regulations.
Before conducting preventive tests, a visual inspection should be carried out. If obvious defects such as cracks are found on the insulation rod, it is not advisable to conduct preventive tests again. It should be promptly sent for repair or replacement.
5.3 The operating rod should undergo a power frequency withstand voltage test according to the preventive testing standards (see preventive testing standards for details), and the rod body should be qualified if there is no heating, internal network, or breakdown phenomenon.

[power tools]ZF-1 High Voltage Direct Discharge Rod

2026-4-22 15:06:24

The ZF-1 high-voltage direct discharge rod is used to discharge residual electricity from the power grid and electrical equipment after a power outage. The applicable voltage levels are 10, 35, 110, 220 kV

Standard configuration:
Rod length 1M+copper wire 16mm ² x 5M
Dimensional parameters of docking operation stick:
1M × 1 section formula
2M × 2 sections
3M x 2-section design
3M x 3-section design
4M × 3 sections
4M x 4 sections

Overview
ZF-1 series high-voltage discharge poles/rods, as well as voltage testers and grounding wire products, are essential tools for safe operations. They are divided into two types according to different usage scenarios: direct type and current limiting type. The former can be used in ordinary situations, while the latter is used on high-capacity devices.

2. Technical indicators
2.1 Environmental conditions for use
Environmental temperature: -25 ��~+55 �� Relative humidity: �� 90%
2.2 Operating Rod Specifications

Model number	Type	voltage level ��KV��	Effective insulation length ��mm��	Grip length ��mm��	Length of flow restriction tube ��mm��	total length ��mm��	Number of sections
ZF-1-10	Direct type	ten	eight hundred and seventy-five	one hundred and twenty-five	��	one thousand	one
ZF-1-35	Direct type	thirty-five	one thousand and seventy-five	one hundred and twenty-five	��	one thousand and two hundred	two

2.3 Discharge wire specifications
The discharge wire is usually selected in two types: 16mm2 and 25mm2, and the length is generally selected in two types: 5m and 7m. Special requirements can be customized according to actual needs.
3. Usage and precautions
3.1 To ensure the safety of personnel and equipment, discharge poles/rods should be stored in a dedicated place with good air circulation and dry environment.
3.2 The use of discharge poles/rods on electrical devices should comply with the relevant provisions of the electrical safety work regulations.
3.3 The discharge operation must be carried out after the electrical verification operation and confirmation of the power outage of the electrical equipment.
3.4 For large capacity electrical equipment, such as power current, power capacitors, large capacity main transformers, etc., discharge poles/rods with current limiting devices must be used for discharge.

4. Regular testing
4.1 The discharge pole/discharge rod must refer to the live working insulation pole and undergo regular preventive tests. The effective insulation part must be able to withstand the corresponding voltage level and power frequency withstand voltage requirements, as specified in the table.
4.2 For discharge poles/rods with current limiting devices, in addition to the effective insulation part that needs to undergo power frequency withstand voltage test according to the live working insulation pole, the current limiting device part also needs to undergo a voltage test separately, according to the requirements in the table.

voltage level ��KV��	Effective insulation test voltage ��KV��	Test time ��min��	Partial test voltage of current limiting device ��KV��	Test time ��min��
ten	forty-five	one	twelve	one
thirty-five	ninety-five	one	forty-two	one

The test is considered qualified if there is no breakdown phenomenon in the effective insulation part without heating and current limiting device.

[power tools]DT series cable reel trailer

2026-4-22 15:05:58

DT series cable reel trailer

Purpose: Drag and drop cables

Model Name	Applicable reel diameter ��m	Applicable reel width m	weight kg
DT-50 cable reel trailer	two point five	one point five	six hundred
DT-80 cable reel trailer	three point two	one point six	eight hundred

[power tools]YSJ hydraulic lifting cable pay off rack

2026-4-22 15:05:51

YSJ hydraulic lifting cable pay off rack

model	YSJ-5	YSJ-10
lifting capacity	5T	10T
itinerary	245mm
total height	1300mm

[power tools]SIC Hydraulic pay off rack

2026-4-22 15:05:46

SIC hydraulic pay off rack

Used to support cable reels during cable laying, it is easy and powerful to use hydraulic power support.
There are fixed and roller type support points, which must be specified when ordering.

model	rated load	increase height	self-respect
model	(KN)	(mm)	(kg)
SIC-5	fifty	520-780	thirty-five
SIC-8	eighty	600-1100	forty-six
SIC-10	one hundred	920-1320	fifty-two

[power tools]SPJ Steel wire rope winding and releasing rack

2026-4-22 15:05:38

SPJ steel wire rope winding and releasing rack

Wire rope reel is suitable for winding and extending wire ropes

Product model name	Rated load KN	Diameter of the wire reel is Ø cm Inner diameter/outer diameter	Wire reel width cm	Weight kg
SPJ-1 Steel Wire Rope Retraining and Retraining Rack	ten	22/50	thirty-four	thirty-two
SPJ-2 Steel Wire Rope Retracting and Retracting Rack	twenty	40/72	sixty-four	forty-two
SPJ-3 steel wire rope winding and releasing rack	thirty	40/85	sixty-four	fifty-two

[power tools]WFJ Horizontal pay off rack

2026-4-22 15:05:29

Product model name	Rated load KN	Diameter of the wire reel is Ø cm	Weight kg
WFJ-20 horizontal pay off rack	twenty	eighty	sixty-six
WFJ-30 horizontal pay off rack	thirty	ninety-eight	ninety

WFJ horizontal pay off rack

[power tools]YFJM Large gantry pay off rack

2026-4-22 15:05:23

Large gantry pay off rack is suitable for supporting cable reels during cable laying construction operations

Product model name	Rated load KN	Length x Width x Height cm	scope of application			weight kg
Product model name	Rated load KN	Length x Width x Height cm	Plate width cm	Diameter of the shaft hole is Ø cm		weight kg
TL008	YFJM��5	100x630x1385	��240	��160	76-103	ninety
TL009	YFJM��10	100x630x1500	��270	��170	120-135	one hundred and ten
TL010	YFJM��15	100x630x1900	��350	��200	130-150	one hundred and forty-five

YFJM large gantry pay off rack

[power tools]LFJK Frame type pay off rack

2026-4-22 15:05:06

Product model name	Rated load KN	Raise height by cm	Weight kg
LFJK-30 frame type pay off rack	thirty	35-100	twenty-two

LFJK frame type pay off rack

[power tools]LFJT Elevating pay off rack

2026-4-22 15:05:01

Product model name	Rated load KN	Raise height by cm	Weight kg
LFJT-30 lifting pay off rack	thirty	70-125	forty

LFJT lifting pay off rack

[power tools]LFJZ Foldable pay off rack

2026-4-22 15:04:57

Product model name	Rated load KN	Raise height by cm	Weight kg
LFJZ-60 Foldable Cable Laying Stand	sixty	95-130	forty-three

LFJZ Foldable Cable Laying Stand

[power tools]LFJ Vertical pay off rack

2026-4-22 15:04:53

Product model name	Rated load KN	Raise height by cm	Weight kg
LFJ-30 vertical pay off rack	thirty	65-85	twenty
LFJ-60 vertical pay off rack	sixty	96-130	thirty-six

LFJ vertical pay off rack

[power tools]YFJ Hydraulic pay off rack

2026-4-22 15:04:43

YFJ hydraulic pay off rack

Applicable: In line construction operations, it is used to support cable reels and extend cables

Product model name	Rated load KN	Raise height by cm	Applicable wire reel Diameter x width	Weight kg
YFJ-2 hydraulic pay off rack	twenty	65-85	1.6mx1.0m	twenty
YFJ-10 hydraulic pay off rack	one hundred	92-132	2.5mx1.5m	fifty-two

[power tools]A series cable connectors (A, B, C types)

2026-4-22 15:04:35

GP series cable tray (A, B, C types) technical parameter table:

Model size	Walking pitch mm/r	Thrust kg	Weight kg
GP15	0.02��11	eleven	one point two
GP20	0.05��16	sixteen	two point five
GP30	0.10��25	twenty-six	six point one
GP40	0.5��32	forty-two	eleven point two
GP50	1~4	seventy	thirty-three
GP60	2~48	one hundred	forty-two
4GP60	2~48	one hundred	forty-five

Installation dimension diagram of C-series light pole cable tray

model

Keyway (width x depth)

GP15

��15

four hundred and thirty

thirteen

seventy-two

sixty-eight

fifteen

5×2.5

GP20

��20

��14

four hundred and fifty

fourteen

one hundred and two

forty

thirty-six

twenty

ninety

fifteen

2-M8

5×2.5

GP30

��30

��18

five hundred

eighteen

one hundred and nine

seventy-eight

forty-two

twenty

one hundred and six

twenty

2-M10

6×3

GP40

��40

��30

eight hundred and eighty

twenty-five

one hundred and fifty-four

one hundred and twelve

seventy-five

fifty

one hundred and forty

twenty-five

2-M14

8×4

GP50

��50

��35

eight hundred and eighty

forty

three hundred and four

two hundred and sixty-four

sixty

fifty

one hundred and sixty-eight

10×5

GP60

��60

��45

one thousand one hundred and thirty

forty

three hundred and four

two hundred and sixty-four

sixty

fifty

one hundred and seventy

10×5

GP15�� 20 type cable tray assembly with wire wheel. The L1 size in the table is the standard size, and can be customized for special requirements. Calculation formula: L1 maximum stroke=spool width+cable tray length+60

GP series cable tray (A, B, C types)