Shanghai Huabang Industrial Business Network - relay

[solid state relay]WK��-WK Series Remote Control Switch Solid State Relay

2026-5-1 10:27:36

Remote control switch solid-state relay

GJ��-WK:
The GJ �� - WK series solid-state relays are specially designed and produced by our company for hotels and guest rooms Can be used for power control in hotels, guesthouses, bathhouses, and other places. Its main functions are:
(1) When the AC power is turned on (such as controlled by the guest room key board switch), regardless of the original working state of the solid-state relay, immediately turn on the relay.
(2) Alternating on/off can be achieved through a button switch connected to the relay control terminal. Press once to turn off the relay, press again to turn on the relay. The control terminal has the following characteristics:
a) The potential between terminals is below 6 volts to ensure safety.
b) End to end passive, non-polar, easy to install and connect.
c) Multiple buttons can be connected in parallel between ends to achieve multi-point control. This series of solid-state relays can also be used for multi-point electrical control in large clubs (such as stage lighting, sound systems, etc.).

Main electrical parameters:
AC voltage: AC220V
AC current: AC 5A, 10A, 15A, 25A, 40A (see product label for details)
Control terminal voltage: �� 6VDC
Power supply - Control end dielectric withstand voltage: �� 2500V
Power supply - shell dielectric withstand voltage: �� 2500V

application circuit

Installation diagram for radiator size

GJ �� - WK series remote control switch solid-state relay

[solid state relay]MK��- MK Solid State Relay

2026-5-1 10:27:16

High current solid-state relay

GJH��-MK
GJH �� - MK solid-state relay adopts high-capacity chips and is a high current solid-state relay used in conjunction with GKK-W+thyristor phase-shifting voltage regulation module. As an independent packaging structure, it allows a large current to pass through. We have models ranging from 100A to 300A.

Main parameters:

Load current: AC 100A~300A (see product label for details)
Main switch voltage: 220VAC
Peak voltage: �� 600VAC
Switch voltage regulation range: 0V~220VAC
Input control: GKK-W+thyristor phase-shifting voltage regulation module
Input output medium withstand voltage: �� 2500V
Output - Shell medium withstand voltage: �� 2500V

application circuit

Note: This series of solid-state relays has a high heat generation and must be paired with a suitable heat sink to function properly.

GJH �� - MK Solid State Relay

[solid state relay]GKZ��-W series single-phase high-power AC frequency voltage regulation module

2026-5-1 10:26:59

The GKZ �� - W series single-phase high-power AC cycle voltage regulation module is a voltage regulation module that can directly drive loads below 60-100A. Its control method is manual or automatic. When using an external potentiometer for manual control, the control power supply is provided by the module itself, and no external power supply is required; Directly connecting the temperature control instrument can achieve automatic control.

Main parameters:
Load current: AC 60-100A (actual current selection usually does not exceed 70% of rated current)
Power supply voltage: 220VAC
Voltage regulation range: 0-220VAC
Input control: Voltage type: 1-5V DC
Current type: 4-20mA DC
Input output medium withstand voltage: �� 2500V
Output - Shell medium withstand voltage: �� 2500V

External volume and usage instructions diagram:

GKZ �� - W series single-phase high-power AC frequency regulation module

[solid state relay]JGJ10,JGJ11 Direct insertion horizontal single-phase AC solid-state relay

2026-4-30 15:40:07

JGJ10, JGJ11 direct insertion horizontal single-phase AC solid-state relay

Optical isolation between input and output circuits.
Control signal and TTL logic interface.
Bidirectional thyristor output, zero voltage on, zero current off.
The isolation voltage is greater than 2000V.
Plug in welding structure, small size, easy installation.
The product is mainly used for isolation control of weak and strong electricity in industrial automation
It can also be used as a driving stage for various high-power output devices and as a low-power electrical appliance. Contactless switch control for electric motors, solenoid valves, power supplies, etc.

		JGJ10 (formerly JGX0J)	JGJ11 (formerly JGX1J)
lose enter ginseng number	control voltage	3��9VD C12��32VDC
	control the current	5��28mA 6��25mA
	starting current	��6mA
	Turn off voltage	��1VDC
	On-off time	��15mS
lose go out ginseng number	load voltage	24��240VAC 24��440VAC
	Maximum load current	1A 3A
	On state pressure drop	��1.5V
	Off state voltage	��400V ��800V
sex can ginseng number	isolation voltage	��2000V
	insulation resistance	��100M��
	Operating Temperature	��25��75 ��
	power frequency	50/60HZ
	Load current safety factor	Resistive load is taken as 2-3 times, inductive load is taken as 3-4 times
	External dimensions (code)	31×16×16mm3(H-1)	33×25×15mm3(H-2)

External dimensions Installation wiring diagram: (unit: mm)

H-1 H-2

Temperature curve chart:

JGJ10, JGJ11 straight insertion horizontal single-phase AC solid state relay selection precautions:
When selecting products, different margins should be left in the current level according to the nature of the load. (For resistive loads, 2-3 times the load current can be selected. For inductive or capacitive loads, 3-4 times the load current can be selected).
According to the relationship between load current and ambient temperature, when the ambient temperature is high or the heat dissipation conditions are poor. The current capacity should be increased. To prevent short circuit of the load during use, it is required to connect a fast circuit breaker or fast fuse corresponding to this product in series in the load circuit.
When dealing with inductive loads, a varistor should be connected in parallel at the output end to prevent damage to the thyristor during overvoltage. Selection of Varistors (MOVs): 430-470V for 240V and 680-750V for 440V.
When the input control voltage is marked as 3-32VDC and the actual load voltage is greater than 12VDC, a protective resistor should be connected in series in the control circuit, which can be determined according to the input current (8-25mA) (usually about 1.5K ��/1-2W).
This model of product is naturally cooled and does not require a radiator during operation.

[solid state relay]JGJ16B Single phase hybrid ultra small single-phase AC solid-state relay

2026-4-30 15:30:04

JGJ16B Single phase Hybrid Ultra small Single phase AC Solid State Relay

model		JGJ16B
lose enter ginseng number	control voltage	3��6 VDC 5��12VDC 15��24VDC
	control the current	��30mA
	starting current	��6mA
	Turn off voltage	��1.5VDC
	On-off time	��10mS
lose go out ginseng number	load voltage	24��240VAC 24��440VAC
	Maximum load current	6��8��10��20��30 A
	On state pressure drop	��1.5V
	Off state voltage	��400V ��800V
sex can ginseng number	isolation voltage	��1800V
	insulation voltage	��2000V
	Operating Temperature	��25��75 ��
	power frequency	50/60HZ
	Heat dissipation conditions	�� 10A with radiator, �� 20A with fan for strong cooling
	Load current safety factor	Resistive load is 2-3 times, inductive load is 3-5 times
	External dimensions (code)	38×28×23 mm3(J-0)

External dimensions Installation wiring diagram: (unit: mm)

JGJ16B Single phase Hybrid Ultra small Single phase AC Solid State Relay

[solid state relay]JGJ12,JGJ12B Direct insertion vertical single-phase AC solid-state relay

2026-4-30 15:27:00

Optical isolation between input and output circuits.

Control signal and TTL logic interface.
Bidirectional thyristor output, zero voltage on, zero current off.
Isolation voltage greater than 2000V.
Plug in welding structure, small size, easy installation.

The product is mainly used for isolation control of weak and strong electricity in industrial automation, and can also be used as a driving stage for various high-power output devices and low-power electrical appliances. Contactless switch control for electric motors, solenoid valves, power supplies, etc.

model		JGJ12	JGJ12B
lose enter ginseng number	control voltage	3��32VDC 3��9VDC 12��32VDC
	control the current	6��22m A5��26mA 6��22mA
	starting current	��6mA
	Turn off voltage	��1VDC
	On-off time	��15mS
lose go out ginseng number	load voltage	24��240VAC 24��440VAC
	Maximum load current	6A	1A 3A
	On state pressure drop	��1.5V
	Off state voltage	��400V ��800V
sex can ginseng number	isolation voltage	��2000V
	insulation resistance	��100M��
	Operating Temperature	��25��75 ��
	power frequency	50/60HZ
	Load current safety factor	Resistive load is taken as 2-3 times, inductive load is taken as 3-4 times
	External dimensions (code)	43×27×12mm3(H-3)	24×22×8mm3(H-4)

External dimensions Installation wiring diagram: (unit: mm)

JGJ12, JGJ12B direct insertion vertical single-phase AC solid-state relay

[solid state relay]JGJ13,JGJ14 Single phase horizontal single-phase AC solid-state relay

2026-4-30 15:23:34

JGJ13, JGJ14 single-phase horizontal single-phase AC solid-state relay

model		JGJ13 (formerly JGX3)	JGJ14 (formerly JGX3 AC control)
lose enter ginseng number	control voltage	3��32 VDC 4��24 VDC	160��240VAC
	control the current	��25mA	��30mA
	starting current	��6mA	��10mA
	Turn off voltage	��1.5VDC	��50VAC
	On-off time	��10mS	��50mS
lose go out ginseng number	load voltage	24��240VAC 24��440VAC 24��660VAC
	Maximum load current	10��20��30 �� 100��120��150��180A
	On state pressure drop	��1.8V
	Off state voltage	��400V ��800V ��1500V
sex can ginseng number	insulation voltage	��2500V	��2000V
	isolation voltage	��2500V	��2000V
	insulation resistance	��100M��
	Operating Temperature	��25��75 ��
	power frequency	50/60HZ
	Heat dissipation conditions	�� 20A with radiator, �� 40A with fan for strong cooling
	Load current safety factor	Resistive load is taken as 2-3 times, inductive load is taken as 3-4 times
	External dimensions (code)	58 × 45 × 21 mm3 (J-1) or 59 × 45 × 24 mm3 (J-7)

External dimensions Installation wiring diagram: (unit: mm)

JGJ13, JGJ14 single-phase horizontal single-phase AC solid-state relay

[solid state relay]JGJ15 Single phase horizontal capacitive load dedicated single-phase AC solid-state relay

2026-4-30 15:18:31

JGJ15 Single phase Horizontal Capacitive Load Dedicated Single phase AC Solid State Relay

model		JGJ15
lose enter ginseng number	control voltage	3��32 VDC 4��24 VDC
	control the current	��25mA
	starting current	��6mA
	Turn off voltage	��1.5VDC
	On-off time	��10mS
lose go out ginseng number	load voltage	24��440VAC 24��660VAC
	Maximum load current	10��20��30 �� 100��120��150��180A
	On state pressure drop	��1.8V
	Off state voltage	��800V ��1500V
sex can ginseng number	insulation voltage	��2500V
	isolation voltage	��2500V
	insulation resistance	��100M��
	Operating Temperature	��25��75 ��
	power frequency	50/60HZ
	Heat dissipation conditions	�� 20A with radiator, �� 40A with fan for strong cooling
	Load current safety factor	Resistive load is taken as 2-3 times, inductive load is taken as 3-4 times
	External dimensions (code)	58 × 45 × 22 mm3 (J-1) or 59 × 45 × 24 mm3 (J-7)

JGJ15 Single phase horizontal capacitive load dedicated single-phase AC solid state relay external dimensions Installation wiring diagram: (unit: mm)

JGJ15 Single phase Horizontal Capacitive Load Dedicated Single phase AC Solid State Relay

[solid state relay]Horizontal passive control single-phase AC solid-state relay

2026-4-30 15:18:15

model		JGJ17	JGJ17B
lose enter ginseng number	Control switch withstand voltage	The working voltage is greater than 1.5 times the maximum load voltage
	Control switch current	Connect the working current to be greater than 100mA
	On-off time	Activate 5 �� mS; Disconnect �� 20 mS


lose go out ginseng number	output state	A set of normally open	A set of normally closed
	load voltage	110��240VAC 20��440VAC
	Maximum load current	10��20��100��120��150��180A
	Off state voltage	��600V �� 900V
	On state pressure drop	��1.8 V
sex can ginseng number	isolation voltage	The control end and output end must be optically and non electrically isolated, and attention must be paid when using them.
	insulation voltage	��2500V
	insulation resistance	��100M��
	Operating Temperature	��25��75 ��
	power frequency	50/60HZ
	Heat dissipation conditions	�� 20A with radiator, �� 40A with fan for strong cooling
	Load current safety factor	Resistive load is taken as 2-3 times, inductive load is taken as 3-4 times
	External dimensions (code)	58 × 45 × 21 mm3 (J-1) or 59 × 45 × 24 mm3 (J-7)

JGJ17, JGJ17B Horizontal Passive Control Single phase AC Solid State Relay Dimensions Installation wiring diagram: (unit: mm)

JGJ17, JGJ17B Horizontal Passive Control Single phase AC Solid State Relay

[solid state relay]MTS1 series solid-state time relay

2026-4-30 15:11:50

The MTS1 series solid-state time relay is a new generation product that adopts advanced foreign technology. It has the characteristics of small size, good reliability, long service life, and easy use, and is suitable for use as a delay control unit in automatic control circuits, connecting the circuit at a predetermined time,

The external dimensions of MTS1 series solid-state time relay are 50.5 × 50.5 × 31, which can directly replace imported products.

model	MTS1
Classification	Solid state time relay
Specifications and varieties	Adjustable delay type and fixed delay type, available in two legged and three legged versions
Delay range	0.1-8min
Delay range	120s
Contact type	Thyristor output
contact capacity	5A 250V AC
Electrical lifespan (AC-12)	Load capacity: 1A
characteristic	Plastic sealed type, small size, long lifespan.

[solid state relay]GZ Series DC Solid State Relay

2026-4-30 14:49:57

GZ series DC solid-state relay

Features:
DC solid-state relays have strong anti-interference ability, low output saturation voltage drop, and low power consumption due to optoelectronic isolation of input and output.

Main technical performance indicators of GZ series DC solid-state relay: (ambient temperature 25 ��)

input parameters	test conditions	minimum	typical value	maximum	unit
Control voltage range		three		18(*32)	VDC
input current	Vin=5VDC		five		mADC
Turn off voltage				one	VDC
insulation resistance		one hundred and nine			��
insulation voltage	50Hz Ac	two thousand and five hundred			V(RMS)
Critical conduction voltage		three			VDC
load voltage scope		five		nominal voltage	VDC
On state pressure drop	Maximum load electric current			one point eight	VDC
Segment leakage current				ten	µADC
on-time				zero point one	ms
turn-off time				one	ms

Input voltage 3-32V is constant current (GZ10-W is constant current)
Input voltage of 3-18V is of series resistance type (GZ1-5 is of series resistance type)
When the input terminal of the series resistance type exceeds 18VDC, please connect an appropriate resistor in the input terminal to ensure that the input current is around 5-8mA, or specify the input voltage requirement when ordering.

[solid state relay]GJJ series AC zero crossing solid-state relay

2026-4-30 14:49:22

Characteristics:
Communication input, communication output.

Main technical performance indicators: (ambient temperature 25 ��)

model	Main input parameters				isolation voltage ��VAC��	appearance
model	control voltage ��VAC��	Load voltage range ��VAC��	Rated load current ��AAC��	On state pressure drop ��AAC��	isolation voltage ��VAC��	appearance
GJJ10-W	20-220	two hundred and twenty	ten	��1.8	��2500
GJJ15-W	20-220		fifteen	��1.8	��2500
GJJ20-W	20-220		twenty	��1.8	��2500
GJJ25-W	20-220		twenty-five	��1.8	��2500
GJJ40-W	20-220		forty	��1.8	��2500
GJJN10-W	20-220		ten	��1.8	��2500
GJJN20-W	20-220		twenty	��1.8	��2500
GJJN25-W	20-220		twenty-five	��1.8	��2500
GJJN40-W GJJ10-W	20-220		forty	��1.8	��2500

GJJ series AC zero crossing solid-state relay

[solid state relay]GJJH series three-phase zero crossing solid-state relay

2026-4-30 14:49:02

GJJH series three-phase zero crossing solid-state relay

Characteristics:
Communication input, communication output.

Main technical performance indicators: (ambient temperature 25 ��)

model	Main input parameters				isolation voltage ��VAC��
model	control voltage ��VAC��	Load voltage range ��VAC��	Rated load current ��AAC��	On state pressure drop ��AAC��	isolation voltage ��VAC��
GJJH10-W	20-220	three hundred and eighty	ten	��1.8	��2500
GJJH15-W	20-220		fifteen	��1.8	��2500
GJJH20-W	20-220		twenty	��1.8	��2500
GJJH25-W	20-220		twenty-five	��1.8	��2500
GJJH40-W GJJ10-W GJJ10-W	20-220		forty	��1.8	��2500
GJJNH10-W	20-220		ten	��1.8	��2500
GJJNH15-W	20-220		fifteen	��1.8	��2500
GJJNH20-W	20-220		twenty	��1.8	��2500
GJJNH25-W	20-220		twenty-five	��1.8	��2500
GJJNH40-W	20-220		forty	��1.8	��2500

GJJH series three-phase zero crossing solid-state relay

[solid state relay]GJNH series AC three-phase non zero crossing solid-state relay

2026-4-30 14:48:41

Characteristics:
The conduction time of GJNH series three-phase AC solid-state relay is 1ms (50Hz), which is faster than GJH series. Other electrical parameters and external installation dimensions can refer to the corresponding varieties of GJH three-phase series.

Main technical performance indicators of GJNH series AC three-phase non zero crossing solid-state relay: (ambient temperature 25 ��)

Model Load Current A
GJNH15��W��3 15
GJNH25��W��3 25
GJNH40��W��3 40
GJNH55��W��3 55

input parameters	test conditions	minimum	typical value	maximum	unit
Control voltage range		four point five		thirty-two	VDC
input current	Vin=5VDC		twenty		mADC
insulation resistance		one hundred and nine			��
insulation voltage	50Hz Ac	two thousand and five hundred			V(RMS)
Critical conduction voltage		four point five			VDC
Turn off voltage				one	VDC
load voltage scope		twenty		four hundred and eighty	V(RMS)
surge voltage	20ms non-repeating			one thousand	%Load current
On state pressure drop	Maximum load current		one point five		V(RMS)
Broken state leakage current	380V50Hz			five	mA ��RMS��
on-time	50Hz			one	ms
turn-off time	50Hz			ten	ms

The input voltage of 3-32V is constant current (usually constant current for voltages �� 10A)
Input voltage of 3-12V is of series resistance type (usually<10A)
When the input terminal of the series resistor type exceeds 12VDC, please connect an appropriate resistor in the input circuit to ensure that the input current is around 10mA, or specify the input voltage requirement when ordering.

[solid state relay]GJN Series AC Non Zero Crossing Solid State Relay

2026-4-30 14:48:17

Main technical performance indicators of GJN series AC non zero crossing solid-state relay: (ambient temperature 25 ��)

model	load current A
GJN1��L	one
GJN1��W	one
GJN2��L	two
GJN2��W	two
GJN3��L	three
GJN3��W	three
GJN5��W	five
GJN10��W	ten
GJN20��W	twenty
GJN40��W	forty
GJN55��W	fifty-five

input parameters	test conditions	minimum	typical value	maximum	unit
Control voltage range		three		12(*32)	VDC
input current	Vin=5VDC		ten		mA DC
insulation resistance		one hundred and nine			��
insulation voltage	50Hz Ac	two thousand and five hundred			V(RMS)
Critical conduction voltage		three			VDC
Turn off voltage				one	VDC
load voltage scope		twenty		two hundred and forty	V(RMS)
surge voltage	20ms non-repeating			one thousand	%Load current
On state pressure drop	Maximum load current		one point eight		V(RMS)
Broken state leakage current	220V50Hz			five	mA ��RMS��
on-time	50Hz			one	ms
turn-off time	50Hz			ten	ms

[solid state relay]GJH-W Series AC High Voltage Three Phase Solid State Relay

2026-4-30 14:47:50

GJH series AC high-voltage three-phase solid state relay

Features:
The GJH series three-phase AC solid-state relay is an electronic switch designed with high reliability for three-phase AC loads. It can directly control loads such as motors and heaters, with advantages such as fast switching speed, no noise, corrosion resistance, and anti-interference. It can interface directly with computer systems and automatic control devices, and its input action signal can be indicated by LED.

Main technical performance indicators: (ambient temperature 25 ��)
Model Load Current A
GJH15��W��3 15
GJH25��W��3 25
GJH40��W��3 40
GJH55��W��3 55
GJH80��W��3 80
GJH100��W��3 100

input parameters	test conditions	minimum	typical value	maximum	unit
Control voltage range		four point five		thirty-two	VDC
input current	Vin=5VDC		twenty		mA DC
insulation resistance		one hundred and nine			��
insulation voltage	50Hz	two thousand and five hundred			V(RMS)
Critical conduction voltage		four point five			VDC
Turn off voltage				one	VDC
load voltage scope		twenty		four hundred and eighty	V(RMS)
surge voltage	20ms non-repeating			one thousand	%Load current
On state pressure drop	Maximum load current		one point eight		V(RMS)
Broken state leakage current	380V50Hz			��5	mA ��RMS��
on-time	50Hz			ten	ms
turn-off time	50Hz			ten	ms

[solid state relay]GJH series AC high-voltage zero crossing solid-state relay

2026-4-30 14:47:28

GJH series AC high-voltage zero crossing solid-state relay

Features:

The zero crossing relay for communication has the characteristics of zero voltage on and zero current off, thus it has the advantages of low interference to the power grid and significant reduction of surge current when driving incandescent lamp loads.

Main technical performance indicators of GJH series AC high-voltage zero crossing solid-state relay: (ambient temperature 25 ��)

model	Load current A
GJH1��L	one
GJH1��W	one
GJH2��L	two
GJH2��W	two
GJH3��L	three
GJH3��W	three
GJH5��W	five
GJH10��W	ten
GJH25��W	twenty-five
GJH40��W	forty
GJH80��W	eighty
GJH100��W	one hundred
GJH120��WM	one hundred and twenty
GJH200��WM	two hundred
GJH300��WM	three hundred

input parameters	test conditions	minimum	typical value	maximum	unit
Control voltage range		three		12(*32)	VDC
input current	Vin=5VDC		ten		mA DC
Turn off voltage				one	VDC
insulation resistance		one hundred and nine			��
insulation voltage	50Hz Ac	two thousand and five hundred			V(RMS)
Critical conduction voltage		three			VDC
load voltage scope		twenty		four hundred and eighty	V(RMS)
surge voltage	20ms non-repeating			one thousand	%Load current
On state pressure drop	Maximum load current		one point eight		V(RMS)
Broken state leakage current	220V50Hz			��5	mA ��RMS��
on-time	50Hz			ten	ms
turn-off time	50Hz			ten	ms

[solid state relay]GJ series AC zero crossing solid-state relay

2026-4-30 14:46:53

GJ series AC zero crossing solid-state relay

Features:
The zero crossing relay for communication has the characteristics of zero voltage on and zero current off, thus it has the advantages of low interference to the power grid and significant reduction of surge current when driving incandescent lamp loads.

Main technical performance indicators of GJ series AC zero crossing solid-state relay: (ambient temperature 25 ��)

input parameters	test conditions	minimum	typical value	maximum	unit
Control voltage range		three		12(*32)	VDC
Turn off voltage				one	VDC
input current	Vin=5VDC		ten		mA DC
insulation resistance		one hundred and nine			��
insulation voltage	50Hz Ac	two thousand and five hundred			V(RMS)
Critical conduction voltage		three			VDC
load voltage scope		twenty		two hundred and forty	V(RMS)
surge voltage	20ms non-repeating			one thousand	%Load current
Zero crossing voltage				±15	V(Peak)
On state pressure drop	Maximum load current		one point eight		V(RMS)
Broken state leakage current	220V50Hz			��5	mA ��RMS��
on-time	50Hz			ten	ms
turn-off time	50Hz			ten	ms

model	Load current A
GJ1��L	one
GJ1��W	one
GJ2��L	two
GJ2��W	two
GJ3��L	three
GJ3��W	three
GJ5��W	five
GJ10��W	ten
GJ25��W	twenty-five
GJ40��W	forty
GJ80��W	eighty
GJ100��W	one hundred
GJ120��WM	one hundred and twenty
GJ200��WM	two hundred
GJ300��WM	three hundred

[solid state relay]GKZ-W Frequency regulation module

2026-4-30 14:46:18

GKZ-W frequency regulation module
The GKZ-W frequency regulation module can form an AC voltage and power regulation system with various specifications of single-phase, two-phase, and three-phase zero crossing solid-state relays. Its working principle is to change the frequency of the output voltage by controlling the input voltage (1-5VDC) or input current (4-20mADC), thereby achieving the goal of changing the output power.

The product adopts an AC zero crossing triggering method to reduce the possible occurrence of high order
The interference of harmonics on the power grid can prevent the occurrence of "overshoot" phenomenon in controlled temperature, and has high temperature control accuracy.

The product control method is simple and can be manual or automatic. When manually operated, an external 10K potentiometer is required, and its control power is provided by this controller, which does not require external connection and is quite convenient. When automatic, it can be directly connected to the temperature control meter and computer. Our company now offers a combination of three-phase electric heating systems for customers to choose from. The specifications include 120A * 3, 200A * 3, and 300A * 3. (including radiator and fan)

Pin function:

name	Function
220VAC	power supply
OUT 16V	Frequency control output
��5V	power control
1��5V	control input
COM	Control the negative terminal

Application circuit:

In the application line:
1. Using a 10K potentiometer, if the automatic input is 4-20mA, please add a 250 �� resistor before inputting.

2. GKZ-W output can control one solid-state relay, as well as two (series) or three (series) solid-state relays.
From the above application circuit, it can be seen that the biggest feature of this voltage regulation control system is that the wiring at the load end is very convenient, especially for three-phase power sources that can be connected freely without recognizing the phase.

3. Module volume: 106mm * 75mm * 33mm.

[solid state relay]Single phase AC phase-shifting voltage regulation module

2026-4-30 14:46:07

The GKK-W single-phase AC phase-shifting voltage regulation module is a voltage regulation module developed by our company for input control of the GJH300-MK series high-power solid-state relay. It can also be directly connected to high-capacity bidirectional thyristors or two-phase single-phase thyristors. When adjusting the input voltage of the module between 1-5VDC, the output terminal of the module generates a 0-180o pulse modulation signal synchronized with the grid voltage to control the output voltage of the power devices connected in series in the circuit.

GKK-W single-phase AC phase-shifting voltage regulation module pin function:

name	function
220VAC	220V power supply
G	Output (bidirectional thyristor control electrode)
A	Output (bidirectional thyristor anode)
��5V	Reference (for manual power supply)
1��5V	Control signal input
COM	Control signal negative terminal

Application circuit:

In the application circuit: potentiometer 10K, if the automatic input is 4-20mA, please add a 250 �� resistor before input.

3. Module volume: 106mm * 75mm * 33mm.

4. Attention: In the case where the high-power thyristor control electrode is damaged and not triggered to conduct, if the triggering module still has control voltage, the current of the power grid will be input from terminal A, then from terminal G to the load, and the majority of the power grid voltage will drop between terminals A and G. The heat generated by this voltage and current will burn out the internal components of terminals A and G within a few seconds.
Suggestion: Adding a 0.1A fuse to the A and G circuits can protect the above situation (especially during debugging to protect the voltage regulation module). This module generates very little heat and generally does not require additional heat dissipation.

[solid state relay]GKK40-W series single-phase AC phase-shifting voltage regulation module

2026-4-30 14:45:56

The Gkx10-40-W series single-phase power AC voltage regulation module is a voltage regulation module that can directly drive loads below 10-40A. Its control method is manual or automatic. When manually outputting external potentiometer control, the control power is provided by the module itself, without the need for external power supply; Automatically connect the air temperature instrument directly.

Main parameters of GKK40-W series single-phase AC phase-shifting voltage regulation module:
Load current: AC 10A, 15A, 25A, 40A (actual current selection usually does not exceed 70% of rated current)
Power supply voltage: 220VAC
Voltage regulation range: 0-220VAC
Input control: Voltage type: 1-5V DC
Current type: 4-20mA DC
Input output medium withstand voltage: �� 2500V
Appearance: 9-2

GKK40-W series single-phase AC phase-shifting voltage regulation module

[solid state relay]GKK100-W series single-phase high-power AC voltage regulation module

2026-4-30 14:45:43

The GKK100-W series single-phase high-power AC voltage regulation module is a voltage regulation module that can directly drive loads below 60-100A. Its control method is manual or automatic. When using an external potentiometer for manual control, the control power is provided by the module itself, and no external power supply is required; Directly connecting the temperature control instrument can achieve automatic control.

Main parameters:
Load current: AC 60-100A (actual current selection usually does not exceed 70% of rated current)
Power supply voltage: 220VAC
Voltage regulation range: 0-220VAC
Input control: Voltage type: 1-5V DC
Current type: 4-20mA DC
Input output medium withstand voltage: �� 2500V
Output - Shell medium withstand voltage: �� 2500V

GKK100-W series single-phase high-power AC voltage regulation module external volume and usage instructions diagram:

GKK100-W series single-phase high-power AC voltage regulation module

[solid state relay]GJH Two phase AC Solid State Relay (with accompanying heat sink)

2026-4-30 14:45:36

GJH20�� The 40-60-2 type solid-state relay is an electronic switch designed for AC loads with high reliability. It can directly control loads such as electric motors and heaters, with advantages such as fast switching speed, no noise, corrosion resistance, and anti-interference. It can directly interface with computer systems and automatic control devices, and is widely used in various economic fields such as military and industry. The product is also equipped with a heat sink, as shown in the physical picture.

[solid state relay]Three phase motor forward and reverse solid-state relay

2026-4-30 14:45:33

GJH-W-3ZF three-phase motor forward and reverse solid-state relay

GJH��-WZF:
GJH ��-W-3zF three-phase motor forward and reverse solid-state relay is a module that can directly control the forward and reverse of three-phase motors, with automatic protection function for input signal loss.

rated voltage	380VAC
rated current	10/20/40, etc. (as indicated by the label)
control voltage	6V/12V/24VDC (or can be selected according to user requirements)
isolation voltage
Other	See the figure below

GJH-W-3ZF three-phase motor forward and reverse solid-state relay

[solid state relay]GJ-WT(G) series thyristor solid-state voltage regulator module

2026-4-30 14:45:26

GJ-WT (G) series thyristor solid-state voltage regulator module

Features:
The GJ-WT (G) series thyristor solid-state voltage regulator module is mainly used in electronic products such as temperature control and dimming. It has the characteristics of small size, long lifespan, high control power, and high insulation voltage between the wiring terminals and the base plate.

Product Model	GJ10-40A-WT
control type	Potentiometer adjustment value
conduction angle scope	00 ~1700
peak voltage	��600VAC
insulation voltage	��2500VAC
inrush current	90A	230A
Broken state leakage current	��5mA	��7mA

Product Model	GJ10-40A-WTG
control type	3~15VDC
output voltage scope	0 ~220V
peak voltage	��600VAC
insulation voltage	��2500VAC
inrush current	90A	230A
Off state leakage current	��5mA	��7mA

type number	negative load electricity press V	negative load electricity flow A	outside form
GJ10��WT	24 ��240V	ten
GJ20��WT	24 ��240V	twenty
GJ40��WT	24 ��240V	forty
GJ10��WTG	0��220V	ten
GJ20��WTG	0��220V	twenty
GJ40��WTG	0��220V	forty

Instructions for use:
1. Select a solid-state voltage regulator of appropriate specifications based on the load power, and equip it with a suitable fast fuse to meet the usage requirements.
When the current is high, add a heat sink as required or fix it on a metal base plate of the corresponding area. Apply thermal conductive silicone grease to the installation surface and pay attention to ventilation and heat dissipation.
If there is severe RF interference, an inductive coil can be connected in series in the load circuit.
4. External potentiometer, can be supplied as a set or purchased by the user. It is required to be connected to a WX-2W potentiometer with a resistance of about 680K.
5. WT type: Input and output are not insulated. Please pay attention to safety during use and do not touch the module and potentiometer contact terminals.

[solid state relay]TSR-100AA-H Three phase AC Solid State Relay (High Voltage Type)

2026-4-30 14:44:58

TSR-100AA-H Three phase AC Solid State Relay (High Voltage Type)

Optoelectronic isolation between the control circuit and the load circuit.
Controllable silicon output, zero current shutdown.
Voltage zero crossing opens.
Equipped with a resistance capacitance absorption circuit.
Control signals are compatible with TTL logic; Optional safety cover.
Rectangular in shape, encapsulated with epoxy resin (module).
Suitable radiators should be equipped during use, and forced air cooling should be strengthened if necessary.
The three-phase starting characteristics are consistent.
Flame retardant engineering plastic shell, metal bottom plate
Widely applicable: such as industrial electric furnaces, ovens, water pumps, electric motors, electrical switchgear, automation control equipment, etc

TSR-40AA-H three-phase AC solid state relay (high voltage type) parameters:

model		TSR-60AA-H TSR-80AA-H TSR-100AA-H
lose enter ginseng number	Control method	90-220VAC (AC)<3-32VDC with DC control available>
	input current	Greater than 5mA
	Work instructions	LED
	On-off time	�� 10mS (milliseconds)
	Reliable shutdown voltage	Less than 0.8VDC
lose go out ginseng number	Output voltage withstand	Communication between 220-480VAC and higher can be customized
	Rated working current	60A.80A.100A.
	On state pressure drop	��1.5V
	Minimum conduction current	50mA
	Off state leakage current	Less than 10mA
sex can ginseng number	Dielectric Strength	2500VAC�� 1 minute
	insulation voltage	��2500V
	insulation resistance	��100M��
	Operating Temperature	��35��75 ��
	power frequency	50/60HZ
	Heat dissipation conditions	�� 25A with radiator, �� 40A with fan for strong cooling
	Load current safety factor	Resistive load is 2-4 times, inductive load is 3-5 times
	Overall dimensions	105.0L×74.0W×33.0H
	weight	290g

TSR-100AA-H Three phase AC Solid State Relay (High Voltage Type)

[solid state relay]TSR-100AA-S Three phase AC Solid State Relay (Basic Type)

2026-4-30 14:44:33

TSR-100AA-S Three phase AC Solid State Relay (Basic Type)

Optoelectronic isolation between the control circuit and the load circuit.
Controllable silicon output, zero current shutdown.
Voltage zero crossing opens.
Equipped with a resistance capacitance absorption circuit.
Control signals are compatible with TTL logic; Optional safety cover.
Rectangular in shape, encapsulated with epoxy resin (module).
Suitable radiators should be equipped during use, and forced air cooling should be strengthened if necessary.
The three-phase starting characteristics are consistent.
Flame retardant engineering plastic shell, metal bottom plate
Widely applicable: such as industrial electric furnaces, ovens, water pumps, electric motors, electrical switchgear, automation control equipment, etc

model		TSR-60AA-S TSR-80AA-S TSR-100AA-S
lose enter ginseng number	Control method	90-220VAC (AC)
	input current	Greater than 5mA
	Work instructions	LED
	On-off time	�� 10mS (milliseconds)
	Reliable shutdown voltage	Less than 0.8VDC
lose go out ginseng number	output voltage	Communication 220-380VAC
	Rated working current	60A.80A.100A.
	On state pressure drop	��1.5V
	Minimum conduction current	50mA
	Off state leakage current	Less than 10mA
sex can ginseng number	Dielectric Strength	2500VAC�� 1 minute
	insulation voltage	��2500V
	insulation resistance	��100M��
	Operating Temperature	��35��75 ��
	power frequency	50/60HZ
	Heat dissipation conditions	�� 25A with radiator, �� 40A with fan for strong cooling
	Load current safety factor	Resistive load is 2-4 times, inductive load is 3-5 times
	Overall dimensions	105.0L×74.0W×33.0H
	weight	290g

TSR-100AA-S Three phase AC Solid State Relay (Basic Type)

[solid state relay]TSR-40AA-H Three phase AC Solid State Relay (High Voltage Type)

2026-4-30 14:44:11

TSR-40AA-H Three phase AC Solid State Relay (High Voltage Type)

Optoelectronic isolation between the control circuit and the load circuit.
Controllable silicon output, zero current shutdown.
Voltage zero crossing opens.
Equipped with a resistance capacitance absorption circuit.
Control signals are compatible with TTL logic; Optional safety cover.
Rectangular in shape, encapsulated with epoxy resin (module).
Suitable radiators should be equipped during use, and forced air cooling should be strengthened if necessary.
The three-phase starting characteristics are consistent.
Flame retardant engineering plastic shell, metal bottom plate
Widely applicable: such as industrial electric furnaces, ovens, water pumps, electric motors, electrical switchgear, automation control equipment, etc

TSR-40AA-H three-phase AC solid state relay (high voltage type) parameters:

model		TSR-10AA-H TSR-15AA-H TSR-25AA-H TSR-40AA-H
lose enter ginseng number	Control method	90-220VAC (AC)
	input current	Greater than 5mA
	Work instructions	LED
	On-off time	�� 10mS (milliseconds)
	Reliable shutdown voltage	Less than 0.8VDC
lose go out ginseng number	Output voltage withstand	Communication between 220-480VAC and higher can be customized
	Rated working current	10A.15A.25A.40A.
	On state pressure drop	��1.5V
	Minimum conduction current	50mA
	Off state leakage current	Less than 10mA
sex can ginseng number	Dielectric Strength	2500VAC�� 1 minute
	insulation voltage	��2500V
	insulation resistance	��100M��
	Operating Temperature	��35��75 ��
	power frequency	50/60HZ
	Heat dissipation conditions	�� 25A with radiator, �� 40A with fan for strong cooling
	Load current safety factor	Resistive load is 2-4 times, inductive load is 3-5 times
	Overall dimensions	105.0L×74.0W×33.0H
	weight	290g

TSR-40AA-H Three phase AC Solid State Relay (High Voltage Type)

[solid state relay]TSR-40AA-S Three phase AC Solid State Relay (Basic Type)

2026-4-30 14:43:51

TSR-40AA-S Three phase AC Solid State Relay (Basic Type)

Optoelectronic isolation between the control circuit and the load circuit.
Controllable silicon output, zero current shutdown.
Voltage zero crossing opens.
Equipped with a resistance capacitance absorption circuit.
Control signals are compatible with TTL logic; Optional safety cover.
Rectangular in shape, encapsulated with epoxy resin (module).
Suitable radiators should be equipped during use, and forced air cooling should be strengthened if necessary.
The three-phase starting characteristics are consistent.
Flame retardant engineering plastic shell, metal bottom plate
Widely applicable: such as industrial electric furnaces, ovens, water pumps, electric motors, electrical switchgear, automation control equipment, etc

model		TSR-10AA-S TSR-15AA-S TSR-25AA-S TSR-40AA-S
lose enter ginseng number	Control method	90-220VAC (AC)
	input current	Greater than 5mA
	Work instructions	LED
	On-off time	�� 10mS (milliseconds)
	Reliable shutdown voltage	Less than 0.8VDC
lose go out ginseng number	output voltage	Communication 220-380VAC
	Rated working current	10A.15A.25A.40A.
	On state pressure drop	��1.5V
	Minimum conduction current	50mA
	Off state leakage current	Less than 10mA
sex can ginseng number	Dielectric Strength	2500VAC�� 1 minute
	insulation voltage	��2500V
	insulation resistance	��100M��
	Operating Temperature	��35��75 ��
	power frequency	50/60HZ
	Heat dissipation conditions	�� 25A with radiator, �� 40A with fan for strong cooling
	Load current safety factor	Resistive load is 2-4 times, inductive load is 3-5 times
	Overall dimensions	105.0L×74.0W×33.0H
	weight	290g

TSR-40AA-S Three phase AC Solid State Relay (Basic Type)

[solid state relay]TSR Three phase current type voltage regulating solid-state relay

2026-4-30 14:43:29

model		TSR-40DA-W TSR-60DA-W TSR-80DA-W TSR-100DA-W TSR-120DA-W
lose enter ginseng number	Control method	0-10VDC direct current
	input current	4-20ma
	Work instructions	LED
	On-off time	�� 10mS (milliseconds)
	Reliable shutdown voltage	/
lose go out ginseng number	output voltage	Exchange 380VAC
	Rated working current	40A.60A.80A.100A.120A.150A
	On state pressure drop	��1.5V
	Minimum conduction current	50mA
	Off state leakage current	Less than 10mA
sex can ginseng number	Dielectric Strength	2500VAC�� 1 minute
	insulation voltage	��2500V
	insulation resistance	��100M��
	Operating Temperature	��35��75 ��
	power frequency	50/60HZ
	Heat dissipation conditions	�� 25A with radiator, �� 40A with fan for strong cooling
	Load current safety factor	Resistive load is 2-4 times, inductive load is 3-5 times
	Overall dimensions	105.0L×74.0W×33.0H
	weight	280g

TSR three-phase current type voltage regulating solid-state relay

[solid state relay]TSR-40DA-W Three phase voltage type regulating solid-state relay

2026-4-30 14:43:10

TSR-40DA-W Three phase Voltage Regulating Solid State Relay

Optoelectronic isolation between the control circuit and the load circuit.
Controllable silicon output, zero current shutdown.
Equipped with a resistance capacitance absorption circuit.
Control signals are compatible with TTL logic; Optional safety cover.
Rectangular in shape, encapsulated with epoxy resin (module).
Suitable radiators should be equipped during use, and forced air cooling should be strengthened if necessary.
The three-phase starting characteristics are consistent.
Flame retardant engineering plastic shell, metal bottom plate
Widely applicable: such as industrial electric furnaces, ovens, water pumps, electric motors, electrical switchgear, automation control equipment, etc

Parameters:

model		TSR-40DA-W TSR-60DA-W TSR-80DA-W TSR-100DA-W TSR-120DA-W
lose enter ginseng number	Control method	0-10VDC direct current
	input current	4-20ma
	Work instructions	LED
	On-off time	�� 10mS (milliseconds)
	Reliable shutdown voltage	/
lose go out ginseng number	output voltage	Exchange 380VAC
	Rated working current	40A.60A.80A.100A.120A.150A
	On state pressure drop	��1.5V
	Minimum conduction current	50mA
	Off state leakage current	Less than 10mA
sex can ginseng number	Dielectric Strength	2500VAC�� 1 minute
	insulation voltage	��2500V
	insulation resistance	��100M��
	Operating Temperature	��35��75 ��
	power frequency	50/60HZ
	Heat dissipation conditions	�� 25A with radiator, �� 40A with fan for strong cooling
	Load current safety factor	Resistive load is 2-4 times, inductive load is 3-5 times
	Overall dimensions	105.0L×74.0W×33.0H
	weight	280g

Dimensions and installation wiring diagram of current type three-phase solid-state voltage regulator: (unit: mm)

TSR-40DA-W Three phase Voltage Regulating Solid State Relay

[solid state relay]SSR-40WA Single phase AC voltage type solid-state voltage regulator (power and voltage regulation module)

2026-4-30 14:42:43

SSR-40WA single-phase AC voltage type solid-state voltage regulator (power and voltage regulation module)

Optoelectronic isolation between the control circuit and the load circuit.
Controllable silicon output, zero current shutdown.
Voltage zero crossing opens.
Equipped with a resistance capacitance absorption circuit.
Control signals are compatible with TTL logic; Optional safety cover.
Rectangular in shape, encapsulated with epoxy resin (module).
Suitable radiators should be equipped during use, and forced air cooling should be strengthened if necessary.
The three-phase starting characteristics are consistent.
Flame retardant engineering plastic shell, metal bottom plate
Widely applicable: such as industrial electric furnaces, ovens, water pumps, electric motors, electrical switchgear, automation control equipment, etc

SSR-40WA single-phase AC voltage type solid-state voltage regulator (power and voltage regulation module) parameters:

model		SSR-10WA SSR-15WA SSR-25WA SSR-40WA SSR-60WA SSR-80WA SSR-100WA
lose enter ginseng number	Control method	0-5VDC DC DC
	input current	4-20ma
	Work instructions	LED
	On-off time	�� 10mS (milliseconds)
	Reliable shutdown voltage	Less than 0.8VDC
lose go out ginseng number	output voltage	AC 220VAC, AC 380VAC
	Rated working current	10A.15A.25A.40A.60A.80A.
	On state pressure drop	��1.5V
	Minimum conduction current	50mA
	Off state leakage current	Less than 10mA
sex can ginseng number	Dielectric Strength	2500VAC�� 1 minute
	insulation voltage	��2500V
	insulation resistance	��100M��
	Operating Temperature	��35��75 ��
	power frequency	50/60HZ
	Heat dissipation conditions	�� 25A with radiator, �� 40A with fan for strong cooling
	Load current safety factor	Resistive load is 2-4 times, inductive load is 3-5 times
	Overall dimensions	105.0L×74.0W×33.0H
	weight	100g

SSR-40WA single-phase AC voltage type solid-state voltage regulator (power and voltage regulation module)

[solid state relay]SSR Single phase AC voltage type solid-state voltage regulator (power and voltage regulation module)

2026-4-30 14:42:21

SSR single-phase AC voltage type solid-state voltage regulator (power and voltage regulation module)

Optoelectronic isolation between the control circuit and the load circuit.
Controllable silicon output, zero current shutdown.
Voltage zero crossing opens.
Equipped with a resistance capacitance absorption circuit.
Control signals are compatible with TTL logic; Optional safety cover.
Rectangular in shape, encapsulated with epoxy resin (module).
Suitable radiators should be equipped during use, and forced air cooling should be strengthened if necessary.
The three-phase starting characteristics are consistent.
Flame retardant engineering plastic shell, metal bottom plate
Widely applicable: such as industrial electric furnaces, ovens, water pumps, electric motors, electrical switchgear, automation control equipment, etc

SSR single-phase AC voltage type solid-state voltage regulator (power and voltage regulation module) parameters:

model		SSR-10WA SSR-15WA SSR-25WA SSR-40WA SSR-60WA SSR-80WA SSR-100WA
lose enter ginseng number	Control method	0-5VDC DC DC
	input current	4-20ma
	Work instructions	LED
	On-off time	�� 10mS (milliseconds)
	Reliable shutdown voltage	Less than 0.8VDC
lose go out ginseng number	output voltage	AC 220VAC, AC 380VAC
	Rated working current	10A.15A.25A.40A.60A.80A.
	On state pressure drop	��1.5V
	Minimum conduction current	50mA
	Off state leakage current	Less than 10mA
sex can ginseng number	Dielectric Strength	2500VAC�� 1 minute
	insulation voltage	��2500V
	insulation resistance	��100M��
	Operating Temperature	��35��75 ��
	power frequency	50/60HZ
	Heat dissipation conditions	�� 25A with radiator, �� 40A with fan for strong cooling
	Load current safety factor	Resistive load is 2-4 times, inductive load is 3-5 times
	Overall dimensions	105.0L×74.0W×33.0H
	weight	100g

SSR single-phase AC voltage type solid-state voltage regulator (power and voltage regulation module)

[solid state relay]Single phase current type solid-state voltage regulator (power and voltage regulation module)

2026-4-30 14:42:00

SSR single-phase current type solid-state voltage regulator (power and voltage regulation module)

Optoelectronic isolation between the control circuit and the load circuit.
Controllable silicon output, zero current shutdown.
Voltage zero crossing opens.
Equipped with a resistance capacitance absorption circuit.
Control signals are compatible with TTL logic; Optional safety cover.
Rectangular in shape, encapsulated with epoxy resin (module).
Suitable radiators should be equipped during use, and forced air cooling should be strengthened if necessary.
The three-phase starting characteristics are consistent.
Flame retardant engineering plastic shell, metal bottom plate
Widely applicable: such as industrial electric furnaces, ovens, water pumps, electric motors, electrical switchgear, automation control equipment, etc

SSR single-phase current type solid-state voltage regulator (power and voltage regulation module) parameters:

model		SSR-10WA SSR-15WA SSR-25WA SSR-40WA SSR-60WA SSR-80WA SSR-100WA
lose enter ginseng number	Control method	0-5VDC DC DC
	input current	4-20ma
	Work instructions	LED
	On-off time	�� 10mS (milliseconds)
	Reliable shutdown voltage	Less than 0.8VDC
lose go out ginseng number	output voltage	AC 220VAC, AC 380VAC
	Rated working current	10A.15A.25A.40A.60A.80A.
	On state pressure drop	��1.5V
	Minimum conduction current	50mA
	Off state leakage current	Less than 10mA
sex can ginseng number	Dielectric Strength	2500VAC�� 1 minute
	insulation voltage	��2500V
	insulation resistance	��100M��
	Operating Temperature	��35��75 ��
	power frequency	50/60HZ
	Heat dissipation conditions	�� 25A with radiator, �� 40A with fan for strong cooling
	Load current safety factor	Resistive load is 2-4 times, inductive load is 3-5 times
	Overall dimensions	105.0L×74.0W×33.0H
	weight	100g

SSR single-phase current type solid-state voltage regulator (power and voltage regulation module)

[solid state relay]SSR-40VA single-phase resistive solid-state voltage regulator

2026-4-30 14:41:37

Optoelectronic isolation between the control circuit and the load circuit.
Controllable silicon output, zero current shutdown.
Voltage zero crossing opens.
Equipped with a resistance capacitance absorption circuit.
Control signals are compatible with TTL logic; Optional safety cover.
Rectangular in shape, encapsulated with epoxy resin (module).
Suitable radiators should be equipped during use, and forced air cooling should be strengthened if necessary.
The three-phase starting characteristics are consistent.
Flame retardant engineering plastic shell, metal bottom plate

Widely applicable: such as industrial electric furnaces, ovens, water pumps, electric motors, electrical switchgear, automation control equipment, etc

The following are the parameters of a single-phase resistive solid-state voltage regulator (solid-state voltage regulator):

model		SSR-10VA SSR-15VA SSR-25VA SSR-40VA SSR-60VA SSR-80VA
lose enter ginseng number	Control (with added potentiometer)	330K��-510K��/2W
	input current	/
	Work instructions	/
	On-off time	�� 10mS (milliseconds)
	Reliable shutdown voltage	Less than 0.8VDC
lose go out ginseng number	output voltage	Communication 24-220VAC, Communication 24-380VAC
	Rated working current	10A.15A.25A.40A.60A.80A.
	On state pressure drop	��1.5V
	Minimum conduction current	50mA
	Off state leakage current	Less than 10mA
sex can ginseng number	Dielectric Strength	2500VAC�� 1 minute
	insulation voltage	��2500V
	insulation resistance	��100M��
	Operating Temperature	��35��75 ��
	power frequency	50/60HZ
	Heat dissipation conditions	�� 25A with radiator, �� 40A with fan for strong cooling
	Load current safety factor	Resistive load is 2-4 times, inductive load is 3-5 times
	Overall dimensions	105.0L×74.0W×33.0H
	weight	100g

SSR-40VASSR single-phase resistive solid-state voltage regulator external dimensions and installation wiring diagram: (unit: mm)

SSR-40VA single-phase resistive solid-state voltage regulator

[solid state relay]Integrated high-power solid-state relay

2026-4-30 14:41:15

Overall dimensions	80/100/120/150/200/330L×125W×180H
Output load voltage	.90-480VAC
Output load current	200A.250A.300A.350A.400A.
Input control voltage	DC3-32V DC/Only (it is recommended to connect each one in series with no less than 3V)
Input control current	6-35mA
On state pressure drop	��1.5V
Off state leakage current	��1.5mA
Off state time	��10mS
Dielectric Strength	1500VAC
insulation resistance	500M��/500VDC
ambient temperature	-25��-+70��
placement method	bolt fixing
Work instructions	LED
weight	/
explanation	1. Load 10A, a radiator must be installed, and for loads above 40A, a fan for strong cooling or water cooling must be added. 2. When using inductive loads, please be sure to connect a voltage sensor to the output terminal, with a value of not less than 2 times the load voltage 3. The correct selection is: a margin of 3-5 times the actual load working current

TSR-400DA-H Integrated High Power Solid State Relay

[solid state relay]Integrated high-power solid-state relay

2026-4-30 14:41:02

TSR-300DA-H Integrated High Power Solid State Relay

DC (3-32VDC) controlled AC (380480VAC) type

Overall dimensions	80/100/120/150/200/330L×125W×180H
Output load voltage	.90-480VAC
Output load current	200A.250A.300A.350A.400A.
Input control voltage	DC3-32V DC/unit (it is recommended to connect each unit in series with no less than 3V)
Input control current	6-35mA
On state pressure drop	��1.5V
Off state leakage current	��1.5mA
Off state time	��10mS
Dielectric Strength	1500VAC
insulation resistance	500M��/500VDC
ambient temperature	-25��-+70��
placement method	bolt fixing
Work instructions	LED
weight	/
explanation	1. Load 10A, a radiator must be installed, and for loads above 40A, a fan for strong cooling or water cooling must be added. 2. When using inductive loads, please be sure to connect a voltage sensor to the output terminal, with a value of not less than 2 times the load voltage 3. The correct selection is: a margin of 3-5 times the actual load working current

TSR-300DA-H Integrated High Power Solid State Relay

[solid state relay]Integrated medium power solid-state relay

2026-4-30 14:40:50

TSR-200DA-H Integrated Medium Power Solid State Relay

DC (3-32VDC) controlled AC (380480600VAC) type

Overall dimensions	80/100/120/150/200/330L×125W×177H
Output load voltage	380VAC��480VAC��600VAC
Output load current	60A.80A.100A.120A��150A
Input control voltage	DC3-32V DC/unit (it is recommended to connect each unit in series with no less than 3V)
Input control current	6-35mA
On state pressure drop	��1.5V
Off state leakage current	��1.5mA
Off state time	��10mS
Dielectric Strength	1500VAC
insulation resistance	500M��/500VDC
ambient temperature	-25��-+70��
placement method	bolt fixing
Work instructions	LED
weight	/
explanation	1. Load 10A, a radiator must be installed, and for loads above 40A, a fan for strong cooling or water cooling must be added. 2. When using inductive loads, please be sure to connect a voltage sensor to the output terminal, with a value of not less than 2 times the load voltage 3. The correct selection is: a margin of 3-5 times the actual load working current

TSR-200DA-H Integrated Medium Power Solid State Relay

[solid state relay]Integrated medium power solid-state relay

2026-4-30 14:40:37

TSR-100DA-H Integrated Medium Power Solid State Relay

DC (3-32VDC) controlled AC (380480600VAC) type

Overall dimensions	80/100/120/150/200/330L×125W×177H
Output load voltage	380VAC��480VAC��600VAC
Output load current	60A.80A.100A.120A��150A
Input control voltage	DC3-32V DC/unit (it is recommended to connect each unit in series with no less than 3V)
Input control current	6-35mA
On state pressure drop	��1.5V
Off state leakage current	��1.5mA
Off state time	��10mS
Dielectric Strength	1500VAC
insulation resistance	500M��/500VDC
ambient temperature	-25��-+70��
placement method	bolt fixing
Work instructions	LED
weight	/
explanation	1. Load 10A, a radiator must be installed, and for loads above 40A, a fan for strong cooling or water cooling must be added. 2. When using inductive loads, please be sure to connect a voltage sensor to the output terminal, with a value of not less than 2 times the load voltage 3. The correct selection is: a margin of 3-5 times the actual load working current

TSR-100DA-H Integrated Medium Power Solid State Relay

[solid state relay]{{EN_0} �� DD Solid state relay

2026-4-30 14:40:24

Technical Specifications

G3N - �� DD Solid State Relay

[solid state relay]{{EN_0} �� R Solid state relay

2026-4-30 14:40:22

Technical Specifications

G3N - �� R Solid State Relay

[solid state relay]{{EN_0} �� A Solid state relay

2026-4-30 14:40:19

G3N - �� A Solid State Relay Technical Parameters

G3N - �� A Solid State Relay

[solid state relay]{{EN_0} �� D Solid state relay

2026-4-30 14:40:17

Technical Specifications

G3N - �� D Solid State Relay

[solid state relay]SSR-40A Solid state relay

2026-4-30 14:40:14

Technical Specifications

SSR-40A Solid State Relay

[solid state relay]SSR-25DA Solid state relay

2026-4-30 14:40:12

Technical Specifications

SSR-25DA Solid State Relay

[solid state relay]JGX-3F Solid state relay

2026-4-30 14:40:10

Technical Specifications

JGX-3F Solid State Relay

[solid state relay]JGX-2F Solid state relay

2026-4-30 14:40:07

JGX-2F Solid State Relay Technical Parameters

JGX-2F Solid State Relay

[solid state relay]SSR-M Solid state relay

2026-4-30 14:40:05

Technical Specifications

SSR-M Solid State Relay

[solid state relay]SSR-3DA Solid state relay

2026-4-30 14:40:02

Technical parameters of SSR-3DA solid-state relay

SSR-3DA Solid State Relay

[solid state relay]SSR-DD Solid state relay

2026-4-30 14:40:00

Technical Specifications

SSR-DD Solid State Relay

[solid state relay]SSR-DD-MA Solid state relay

2026-4-30 14:39:58

Technical Specifications

SSR-DD-MA Solid State Relay

[solid state relay]SSR-VR Solid state relay

2026-4-30 14:39:55

Technical parameters of SSR-VR solid-state relay

SSR-VR Solid State Relay

[solid state relay]SSR-DA Solid state relay

2026-4-30 14:39:53

Technical Specifications

SSR-DA Solid State Relay

[solid state relay]SSR-AA Solid state relay

2026-4-30 14:39:50

Technical Specifications

SSR-AA Solid State Relay

[solid state relay]SSR-P Solid state relay

2026-4-30 14:39:45

Technical Specifications

SSR-P Solid State Relay

[solid state relay]Single phase circuit board DC solid-state relay

2026-4-30 14:39:42

Overview of YJGX-7FD single-phase circuit board DC solid-state relay:

1. Communication output, using bidirectional thyristor output, zero voltage on, zero current off.
2. The DC output adopts bipolar transistor output, which reduces the conduction voltage and has fast switching speed and strong anti-interference ability.
3. The input signal is compatible with TTO and COMS digital logic circuits.
4. Optical isolation between input and output circuits.
5. The isolation voltage between input and output terminals is 2500V.
6. Single line direct insertion circuit board soldering installation, standard modular size.
7. 100% load current aging test, certified by the European Community CE certification, international ISO9000 certification, and domestic 3C certification.

Model Description:

YJGX-7FD single-phase circuit board DC solid-state relay technical parameters:

single phase electricity road board formula solid state succeed electricity device	Product Model	YJGX-7FD	wiring diagram
	Control method	Direct Current Control Value Stream (DC-DC)
	load current	6A��7A
	load voltage	60VDC��110VDC��220VDC
	control voltage	DC3-32V
	control the current	6-35mA
	On state leakage current	��1.5mA
	On state voltage reduction	��1.2V
	Off state time	��10mS
	Dielectric Strength	1500VAC
	insulation resistance	500M��/500VDC
	ambient temperature	-25��-+70��
	Installation method	Printing layout PCB
	weight	42g	Note: When used for inductive loads, users must add suppression circuits

Product application:
The SSR circuit board solid-state relay adopts a flame-retardant engineering plastic shell, epoxy resin encapsulation, single column direct insertion circuit board welding installation, and standard modular size. Compared with electromagnetic relays, it has no mechanical sound, no contact arcing, higher surge current tolerance, long service life, and high reliability.
The small driving current at the input end makes it convenient to interface with computer terminals and various digital programmable circuits, achieving weak power isolation and control.
Widely used in automation control fields such as petrochemical equipment, food machinery, packaging machinery, textile machinery, CNC machine tools, plastic machinery, fitness equipment, entertainment facilities, etc., it can control small motors, incandescent lamps, indicator lights, low-power power supplies, intelligent instruments and meters, and various solenoid valves. It can also be used as a driving stage for high-power electromagnetic contactors. Especially suitable for harsh environments such as corrosion, humidity, dust prevention, explosion-proof requirements, and frequent switching.

Safety precautions:
1. When used in AC inductive loads, high transient voltage and surge current are applied to the output terminal, which may cause the solid-state relay to conduct or be damaged. It is usually necessary to connect a voltage control device with a specific clamping voltage at the output terminal, such as a two-wire voltage regulator diode or a varistor (MOV). The recommended voltage for varistors is 1.6-1.9 times the rated voltage;
2. For DC inductive loads such as solenoids, electromagnets, and solenoid valves, a freewheeling circuit must be used to suppress the back electromotive force generated during shutdown. A simple method is usually to connect a diode in reverse parallel with the load, but this circuit will affect the release time of inductive loads such as electromagnetic relays, contacts, electromagnets, solenoid valves, etc. A better circuit is to connect a diode and a voltage regulator diode in reverse series or a diode and a resistor in series before connecting it in reverse parallel with the load.
3. When controlling a small current load close to the minimum load current, a virtual load resistor must be connected in parallel to the load to reduce the output leakage current and generate a higher residual voltage on the load.
4. When installing circuit board welding type relays, the welding temperature must be controlled below 260 degrees Celsius and the welding time must be controlled below 5 seconds.
5. In order to avoid the temperature rise of solid-state relays exceeding the allowable value, the design and application should consider the heat dissipation effect and installation position. When two or more solid-state relays are installed side by side, appropriate spacing should be left.

[solid state relay]Single phase circuit board DC solid-state relay

2026-4-30 14:39:17

Product Overview:
1. Communication output, using bidirectional thyristor output, zero voltage on, zero current off.
2. The DC output adopts bipolar transistor output, which reduces the conduction voltage and has fast switching speed and strong anti-interference ability.
3. The input signal is compatible with TTO and COMS digital logic circuits.
4. Optical isolation between input and output circuits.
5. The isolation voltage between input and output terminals is 2500V.
6. Single line direct insertion circuit board soldering installation, standard modular size.
7. 100% load current aging test, certified by the European Community CE certification, international ISO9000 certification, and domestic 3C certification.

Model Description:

Technical Specifications:

single phase electricity road board formula solid state succeed electricity device	Product Model	YJGX-6FD	wiring diagram
	Control method	Direct current controlled direct current (DC-DC)
	load current	5A��6A
	load voltage	60VDC��110VDC��220VDC
	control voltage	DC3-32V
	control the current	6-35mA
	On state leakage current	��1.5mA
	On state voltage reduction	��1.2V
	Off state time	��10mS
	Dielectric Strength	1500VAC
	insulation resistance	500M��/500VDC
	ambient temperature	-25��-+70��
	Installation method	Printing layout PCB
	weight	22g	Note: When used for inductive loads, users must add suppression circuits

[solid state relay]Single phase circuit board DC solid-state relay

2026-4-30 14:38:50

Overview of JGX-5FD single-phase circuit board DC solid-state relay:

1. Communication output, using bidirectional thyristor output, zero voltage on, zero current off.
2. The DC output adopts bipolar transistor output, which reduces the conduction voltage and has fast switching speed and strong anti-interference ability.
3. The input signal is compatible with TTO and COMS digital logic circuits.
4. Optical isolation between input and output circuits.
5. The isolation voltage between input and output terminals is 2500V.
6. Single line direct insertion circuit board soldering installation, standard modular size.
7. 100% load current aging test, certified by the European Community CE certification, international ISO9000 certification, and domestic 3C certification.

Model Description:

Technical Specifications:

single phase electricity road board formula solid state succeed electricity device	Product Model	YJGX-5FD	wiring diagram
	Control method	Direct current controlled direct current (DC-DC)
	load current	4A��5A
	load voltage	60VDC��110VDC��220VDC
	control voltage	DC3-32V
	control the current	6-35mA
	On state leakage current	��1.5mA
	On state voltage reduction	��1.2V
	Off state time	��10mS
	Dielectric Strength	1500VAC
	insulation resistance	500M��/500VDC
	ambient temperature	-25��-+70��
	Installation method	Printing layout PCB
	weight	32g	Note: When used for inductive loads, users must add suppression circuits

Product application:
The SSR circuit board solid-state relay adopts a flame-retardant engineering plastic shell, epoxy resin encapsulation, single column direct insertion circuit board welding installation, and standard modular size. Compared with electromagnetic relays, it has no mechanical sound, no contact arcing, higher surge current tolerance, long service life, and high reliability.
The small driving current at the input end makes it convenient to interface with computer terminals and various digital programmable circuits, achieving weak power isolation and control.

Widely used in automation control fields such as petrochemical equipment, food machinery, packaging machinery, textile machinery, CNC machine tools, plastic machinery, fitness equipment, entertainment facilities, etc., it can control small motors, incandescent lamps, indicator lights, low-power power supplies, intelligent instruments and meters, and various solenoid valves. It can also be used as a driving stage for high-power electromagnetic contactors. Especially suitable for harsh environments such as corrosion, humidity, dust prevention, explosion-proof requirements, and frequent switching.

Safety precautions:
1. When used in AC inductive loads, high transient voltage and surge current are applied to the output terminal, which may cause the solid-state relay to conduct or be damaged. It is usually necessary to connect a voltage control device with a specific clamping voltage at the output terminal, such as a two-wire voltage regulator diode or a varistor (MOV). The recommended voltage for varistors is 1.6-1.9 times the rated voltage;
2. For DC inductive loads such as solenoids, electromagnets, and solenoid valves, a freewheeling circuit must be used to suppress the back electromotive force generated during shutdown. A simple method is usually to connect a diode in reverse parallel with the load, but this circuit will affect the release time of inductive loads such as electromagnetic relays, contacts, electromagnets, solenoid valves, etc. A better circuit is to connect a diode and a voltage regulator diode in reverse series or a diode and a resistor in series before connecting it in reverse parallel with the load.
3. When controlling a small current load close to the minimum load current, a virtual load resistor must be connected in parallel to the load to reduce the output leakage current and generate a higher residual voltage on the load.
4. When installing circuit board welding type relays, the welding temperature must be controlled below 260 degrees Celsius and the welding time must be controlled below 5 seconds.
5. In order to avoid the temperature rise of solid-state relays exceeding the allowable value, the design and application should consider the heat dissipation effect and installation position. When two or more solid-state relays are installed side by side, appropriate spacing should be left.

JGX-5FD single-phase circuit board DC solid-state relay

[solid state relay]Single phase circuit board DC solid-state relay

2026-4-30 14:38:26

single phase electricity road board formula solid state succeed electricity device	Product Model	YJGX-4FD	wiring diagram
	Control method	Direct current controlled direct current (DC-DC)
	load current	3A��4A
	load voltage	60VDC��110VDC��220VDC
	control voltage	DC3-32V
	control the current	6-35mA
	On state leakage current	��1.5mA
	On state voltage reduction	��1.2V
	Off state time	��10mS
	Dielectric Strength	1500VAC
	insulation resistance	500M��/500VDC
	ambient temperature	-25��-+70��
	Installation method	Printing layout PCB
	weight	16g	Note: When used for inductive loads, users must add suppression circuits

[solid state relay]Single phase circuit board DC solid-state relay

2026-4-30 14:38:01

Overview of YJGX-3FD single-phase circuit board DC solid-state relay:

1. Communication output, using bidirectional thyristor output, zero voltage on, zero current off.
2. The DC output adopts bipolar transistor output, which reduces the conduction voltage and has fast switching speed and strong anti-interference ability.
3. The input signal is compatible with TTO and COMS digital logic circuits.
4. Optical isolation between input and output circuits.
5. The isolation voltage between input and output terminals is 2500V.
6. Single line direct insertion circuit board soldering installation, standard modular size.
7. 100% load current aging test, certified by the European Community CE certification, international ISO9000 certification, and domestic 3C certification.

Model Description:

Technical Specifications:

single phase electricity road board formula solid state succeed electricity device	Product Model	YJGX-3FD	wiring diagram
	Control method	Direct current controlled direct current (DC-DC)
	load current	2A��3A
	load voltage	60VDC��110VDC��220VDC
	control voltage	DC3-32V
	control the current	6-35mA
	On state leakage current	��1.5mA
	On state voltage reduction	��1.2V
	Off state time	��10mS
	Dielectric Strength	1500VAC
	insulation resistance	500M��/500VDC
	ambient temperature	-25��-+70��
	Installation method	Printing layout PCB
	weight	18g	Note: When used for inductive loads, users must add suppression circuits

YJGX-3FD single-phase circuit board DC solid-state relay

[solid state relay]Single phase circuit board DC solid-state relay

2026-4-30 14:37:40

single phase electricity road board formula solid state succeed electricity device	Product Model	YJGX-1FD	wiring diagram
	Control method	Direct current controlled direct current (DC-DC)
	load current	1A
	load voltage	60VDC ��110VDC��220VDC
	control voltage	DC3-32V
	control the current	6-35mA
	On state leakage current	��1.5mA
	On state voltage reduction	��1.2V
	Off state time	��10mS
	Dielectric Strength	1500VAC
	insulation resistance	500M��/500VDC
	ambient temperature	-25��-+70��
	Installation method	Printing layout PCB
	weight	14g	Note: When used for inductive loads, users must add suppression circuits

YJGX-1FD single-phase circuit board DC solid-state relay

[solid state relay]YJGX-7FA single-phase circuit board AC solid-state relay

2026-4-30 14:37:18

single phase electricity road board formula solid state succeed electricity device	Product Model	YJGX-7FA	wiring diagram
	Control method	Direct current controlled alternating current (DC-AC)
	load current	6A��7A
	load voltage	240VAC ��380VAC
	control voltage	DC3-32V
	control the current	6-35mA
	On state leakage current	��1.5mA
	On state voltage reduction	��1.2V
	Off state time	��10mS
	Dielectric Strength	1500VAC
	insulation resistance	500M��/500VDC
	ambient temperature	-25��-+70��
	Installation method	Printing layout PCB
	weight	42g	Note: When used for inductive loads, users must add suppression circuits

YJGX-7FA single-phase circuit board AC solid-state relay

[solid state relay]YJGX-6FA single-phase circuit board AC solid-state relay

2026-4-30 14:36:53

Overview of YJGX-6FA single-phase circuit board AC solid-state relay:

1. Communication output, using bidirectional thyristor output, zero voltage on, zero current off.
2. The DC output adopts bipolar transistor output, which reduces the conduction voltage and has fast switching speed and strong anti-interference ability.
3. The input signal is compatible with TTO and COMS digital logic circuits.
4. Optical isolation between input and output circuits.
5. The isolation voltage between input and output terminals is 2500V.
6. Single line direct insertion circuit board soldering installation, standard modular size.
7. 100% load current aging test, certified by the European Community CE certification, international ISO9000 certification, and domestic 3C certification.

Model Description:

YJGX-6FA single-phase circuit board AC solid-state relay technical parameters:

single phase electricity road board formula solid state succeed electricity device	Product Model	YJGX-6FA	wiring diagram
	Control method	Direct current controlled alternating current (DC-AC)
	load current	5A��6A
	load voltage	240VAC ��380VAC
	control voltage	DC3-32V
	control the current	6-35mA
	On state leakage current	��1.5mA
	On state voltage reduction	��1.2V
	Off state time	��10mS
	Dielectric Strength	1500VAC
	insulation resistance	500M��/500VDC
	ambient temperature	-25��-+70��
	Installation method	Printing layout PCB
	weight	22g	Note: When used for inductive loads, users must add suppression circuits

YJGX-6FA single-phase circuit board AC solid-state relay

[solid state relay]YJGX-5FA single-phase circuit board AC solid-state relay

2026-4-30 14:36:28

YJGX-5FA single-phase circuit board AC solid-state relay:

1. Communication output, using bidirectional thyristor output, zero voltage on, zero current off.
2. The DC output adopts bipolar transistor output, which reduces the conduction voltage and has fast switching speed and strong anti-interference ability.
3. The input signal is compatible with TTO and COMS digital logic circuits.
4. Optical isolation between input and output circuits.
5. The isolation voltage between input and output terminals is 2500V.
6. Single line direct insertion circuit board soldering installation, standard modular size.
7. 100% load current aging test, certified by the European Community CE certification, international ISO9000 certification, and domestic 3C certification.

Model Description:

YJGX-5FA single-phase circuit board AC solid-state relay technical parameters:

single phase electricity road board formula solid state succeed electricity device	Product Model	YJGX-5FA	wiring diagram
	Control method	Direct current controlled alternating current (DC-AC)
	load current	4A��5A
	load voltage	240VAC ��380VAC
	control voltage	DC3-32V
	control the current	6-35mA
	On state leakage current	��1.5mA
	On state voltage reduction	��1.2V
	Off state time	��10mS
	Dielectric Strength	1500VAC
	insulation resistance	500M��/500VDC
	ambient temperature	-25��-+70��
	Installation method	Printing layout PCB
	weight	32g	Note: When used for inductive loads, users must add suppression circuits

YJGX-5FA single-phase circuit board AC solid-state relay

[solid state relay]YJGX-4FA single-phase circuit board AC solid-state relay

2026-4-30 14:36:06

YJGX-4FA single-phase circuit board AC solid-state relay:

1. Communication output, using bidirectional thyristor output, zero voltage on, zero current off.
2. The DC output adopts bipolar transistor output, which reduces the conduction voltage and has fast switching speed and strong anti-interference ability.
3. The input signal is compatible with TTO and COMS digital logic circuits.
4. Optical isolation between input and output circuits.
5. The isolation voltage between input and output terminals is 2500V.
6. Single line direct insertion circuit board soldering installation, standard modular size.
7. 100% load current aging test, certified by the European Community CE certification, international ISO9000 certification, and domestic 3C certification.

Model Description:

Technical Specifications:

single phase electricity road board formula solid state succeed electricity device	Product Model	YJGX-4FA	wiring diagram
	Control method	Direct current controlled alternating current (DC-AC)
	load current	3A��4A
	load voltage	240VAC ��380VAC
	control voltage	DC3-32V
	control the current	6-35mA
	On state leakage current	��1.5mA
	On state voltage reduction	��1.2V
	Off state time	��10mS
	Dielectric Strength	1500VAC
	insulation resistance	500M��/500VDC
	ambient temperature	-25��-+70��
	Installation method	Printing layout PCB
	weight	16g	Note: When used for inductive loads, users must add suppression circuits

YJGX-4FA single-phase circuit board AC solid-state relay

[solid state relay]YJGX-3FA single-phase circuit board AC solid-state relay

2026-4-30 14:35:45

Overview of YJGX-3FA single-phase circuit board AC solid-state relay:

1. Communication output, using bidirectional thyristor output, zero voltage on, zero current off.
2. The DC output adopts bipolar transistor output, which reduces the conduction voltage and has fast switching speed and strong anti-interference ability.
3. The input signal is compatible with TTO and COMS digital logic circuits.
4. Optical isolation between input and output circuits.
5. The isolation voltage between input and output terminals is 2500V.
6. Single line direct insertion circuit board soldering installation, standard modular size.
7. 100% load current aging test, certified by the European Community CE certification, international ISO9000 certification, and domestic 3C certification.

YJGX-3FA single-phase circuit board AC solid-state relay model description:

Technical Specifications:

single phase electricity road board formula solid state succeed electricity device	Product Model	YJGX-3FA	wiring diagram
	Control method	Direct current controlled alternating current (DC-AC)
	load current	2A��3A
	load voltage	240VAC ��380VAC
	control voltage	DC3-32V
	control the current	6-35mA
	On state leakage current	��1.5mA
	On state voltage reduction	��1.2V
	Off state time	��10mS
	Dielectric Strength	1500VAC
	insulation resistance	500M��/500VDC
	ambient temperature	-25��-+70��
	Installation method	Printing layout PCB
	weight	18g	Note: When used for inductive loads, users must add suppression circuits

YJGX-3FA single-phase circuit board AC solid-state relay

[solid state relay]YJGX-1FA single-phase circuit board AC solid-state relay

2026-4-30 14:35:24

YJGX-1FA single-phase circuit board AC solid-state relay:

1. Communication output, using bidirectional thyristor output, zero voltage on, zero current off.
2. The DC output adopts bipolar transistor output, which reduces the conduction voltage and has fast switching speed and strong anti-interference ability.
3. The input signal is compatible with TTO and COMS digital logic circuits.
4. Optical isolation between input and output circuits.
5. The isolation voltage between input and output terminals is 2500V.
6. Single line direct insertion circuit board soldering installation, standard modular size.
7. 100% load current aging test, certified by the European Community CE certification, international ISO9000 certification, and domestic 3C certification.

Model Description:

Technical parameters of YJGX-1FA single-phase circuit board AC solid-state relay:

single phase electricity road board formula solid state succeed electricity device	Product Model	YJGX-1FA	wiring diagram
	Control method	Direct current controlled alternating current (DC-AC)
	load current	1A
	load voltage	240VAC ��380VAC
	control voltage	DC3-32V
	control the current	6-35mA
	On state leakage current	��1.5mA
	On state voltage reduction	��1.2V
	Off state time	��10mS
	Dielectric Strength	1500VAC
	insulation resistance	500M��/500VDC
	ambient temperature	-25��-+70��
	Installation method	Printing layout PCB
	weight	14g	Note: When used for inductive loads, users must add suppression circuits

[solid state relay]JSG4 series solid-state time relay

2026-4-30 14:35:02

Product Model	Delay range (S)	Working voltage (v)
JSG4(JSM2)	0.1-3600	AC/DC��110��220
JSG4-J mouth D	0.1-180	AC110 220
JSG4-J mouth	1-900	AC 110��127��220��380DC 24
JSG4 One Mouth T (Low Temperature)	O.1��3600	AC/DC24-240

model	Working voltage range AC (V)	Delay range (s)	Number of power on delay contacts NO	Number of power on delay contacts NC	Number of power-off delay contacts NO	Number of power-off delay contacts NC	Number of auxiliary contacts NO	Number of auxiliary contacts NC
JS7-1N/01	36~380	0.4��60	one	one	--	--	--	--
JS7-1N/02	36~380	0.4��180	one	one	--	--	--	--
JS7-2N/01	36~380	0.4��60	one	one	--	--	one	one
JS7-2N/02	36~380	0.4��180	one	one	--	--	one	one
JS7-3N/01	36~380	0.4��60	--	--	--	one	one	--
JS7-3N/02	36~380	0.4��180	--	--	--	one	one	--
JS7-4N/01	36~380	0.4��60	--	--	one	one	one	one
JS7-4N/02	36~380	0.4��180	--	--	one	one	one	one
JS1J-1/01	36~380	0.4��60	one	one	--	--	--	--
JS1J-1/02	36~380	0.4��180	one	one	--	--	--	--
JS1J-2/01	36~380	0.4��60	one	one	--	--	one	one
JS1J-2/02	36~380	0.4��180	one	one	--	--	one	one
JS1J-3/01	36~380	0.4��60	--	--	--	one	one	--
JS1J-3/02	36~380	0.4��180	--	--	--	one	one	--
JS1J-4/01	36~380	0.4��60	--	--	one	one	one	one
JS1J-4/02	36~380	0.4��180	--	--	one	one

JSG4 series solid-state time relay

[electromagnetic relay]JZC-6Z2CM Type Small Power Relay

2026-4-22 15:00:45

JZC-6Z2CM Small Power Relay

[electromagnetic relay]JRW-230MA type electromagnetic relay JRW-230MA,JRW-231MA,JRW-232MA

2026-4-22 15:00:43

JRW-230MA electromagnetic relay

JRW-230MA,JRW-231MA,JRW-232MA

[electromagnetic relay]JRW-230MF type electromagnetic relay

2026-4-22 15:00:40

JRW-230MF electromagnetic relay

[electromagnetic relay]JPW-220M type electromagnetic relay

2026-4-22 15:00:38

JPW-220M electromagnetic relay

[electromagnetic relay]JMW-271M type electromagnetic relay

2026-4-22 15:00:36

JMW-271M electromagnetic relay

[electromagnetic relay]JMW-270M type electromagnetic relay

2026-4-22 15:00:34

JMW-270M electromagnetic relay

[electromagnetic relay]KJRW-16MA type electromagnetic relay

2026-4-22 15:00:32

KJRW-16MA electromagnetic relay

[electromagnetic relay]JRW-240MD type electromagnetic relay JRW-240MD,JRW-241MD,JRW-241MB

2026-4-22 15:00:30

JRW-240MD electromagnetic relay

JRW-240MD,JRW-241MD,JRW-241MB

[electromagnetic relay]JRW-240M type electromagnetic relay JRW-240M,JRW-241M,JRW-242M

2026-4-22 15:00:28

JRW-240M electromagnetic relay

JRW-240M,JRW-241M,JRW-242M

[electromagnetic relay]JRW-230M type electromagnetic relay JRW-230M,JRW-231M

2026-4-22 15:00:26

JRW-230M electromagnetic relay

JRW-230M,JRW-231M

[electromagnetic relay]JRW-220M type electromagnetic relay JRW-220M,JRW-221M,JRW-222M

2026-4-22 15:00:23

JRW-220M electromagnetic relay

JRW-220M,JRW-221M,JRW-222M

[electromagnetic relay]JRW-210M type electromagnetic relay JRW-210M,JRW-211M

2026-4-22 15:00:20

JRW-210M electromagnetic relay

JRW-210M,JRW-211M

[electromagnetic relay]2105) Ultra small Sealed DC Electromagnetic Relay

2026-4-22 15:00:18

JRC-2105M ultra small sealed DC electromagnetic relay (2105)

Product specifications: 5VDC, 12VDC, 27VDC
Load: 0.5A, 28VDC
Product size: 15.5mm × 8.2mm × 8.2mm
Product weight: �� 5g

Product Introduction:
JRC-2105M ultra small sealed DC electromagnetic relay (2105) has a small volume, high sensitivity, and strong environmental adaptability. It can be widely used for circuit switching in ground equipment, instruments and meters such as aviation, aerospace, and ships.

[electromagnetic relay]7158) Ultra small Sealed DC Electromagnetic Relay

2026-4-22 15:00:14

JZC-200MP ultra small sealed DC electromagnetic relay (7158)

Product specification: 12VDC
Load: 0.5A, 28VDC
Product size: 21mm × 11mm × 11mm
Product weight: �� 15g

Product Introduction:

JZC-200MP ultra small sealed DC electromagnetic relay (7158) is welded and sealed, with two sets of conversion contacts and a load current low level of 0.5A. It can be widely used in aerospace, aviation and other fields for circuit switching.

[electromagnetic relay]7507) Type RF Coaxial Magnetic Holding Electromagnetic Relay

2026-4-22 15:00:10

JPT-29F RF coaxial magnetic holding electromagnetic relay (7507)

Product specifications: 012Vd. c, 028Vd. c
Load: 1GHz, 100W, 1 * 10 ^ 5 times
Product size: 34.5mm * 13mm * 34.3mm
Product weight: �� 75g

Product Introduction:
The JPT-29F RF coaxial magnetic holding electromagnetic relay (7507) complies with the US military standard MIL-DTL-3928F [2003]. The product enterprise standard number is Q/RG0766-2011.

[electromagnetic relay]7503) RF coaxial DC electromagnetic relay

2026-4-22 15:00:06

JPT-5FA RF coaxial DC electromagnetic relay (7503)

Product specification: 024
Load: 30MHz, 400W, 1 * 10 ^ 5 times
Product size: 34.5mm * 13mm * 47mm
Product weight: �� 60g

Product Introduction:
The JPT-5FA RF coaxial DC electromagnetic relay (7503) adopts the US military standard MIL-DTL-3928F [2003]. The product enterprise standard number is Q/RG635-2010.

[electromagnetic relay]7508) Type RF Coaxial Magnetic Holding Electromagnetic Relay

2026-4-22 15:00:02

JPT-30F RF coaxial magnetic holding electromagnetic relay (7508)

Product specifications: 012Vd. c, 028Vd. c
Load: 30MHz, 400W, 1 * 10 ^ 5 times
Product size: 45mm * 19mm * 44mm
Product weight: �� 150g

The JPT-30F RF coaxial magnetic holding electromagnetic relay (7508) adopts the US military standard MIL-DTL-3928F [2003]. 2. The product enterprise standard number is Q/RG20901-2012.

[electromagnetic relay]RF coaxial DC electromagnetic relay (EN_1)

2026-4-22 14:59:59

JPT-20F RF coaxial DC electromagnetic relay (7504)

Product specifications: 12VDC 28VDC
Load: 30MHz, 400W
Product size: 45mm × 19mm × 44mm
Product weight: �� 150g

Product Introduction:
JPT-20F RF coaxial DC electromagnetic relay (7504) can be widely used in RF signal conversion circuits such as radio stations and antennas.

[electromagnetic relay]2175) RF coaxial DC electromagnetic relay

2026-4-22 14:59:55

JPT-15F RF coaxial DC electromagnetic relay (2175)

Product specifications: 012Vd. c, 028Vd. c
Load: 1GHz, 350W, 1 * 10 ^ 5 times
Product size: 67.5mm * 27.7mm * 58.5mm
Product weight: �� 350g

Product Introduction:
The JPT-15F RF coaxial DC electromagnetic relay (2175) uses the US military standard MIL-DTL-3928F [2003]. The product enterprise standard number is Q/RG21014-2013.

[electromagnetic relay]7506) RF coaxial electromagnetic relay

2026-4-22 14:59:51

PT-28F RF coaxial electromagnetic relay (7506)

Product specification: 024Vd. c
Load: 30MHz, 400W, 1 * 10 ^ 6 times
Product size: �� 76mm * 100mm
Product weight: �� 550g

Product Introduction:
The PT-28F RF coaxial electromagnetic relay (7506) adopts the US military standard MIL-DTL-3928F [2003]. The product enterprise standard number is Q/RG20975-2013.

[electromagnetic relay]7511A) RF Electromagnetic Relay

2026-4-22 14:59:47

JPT-33FA RF Electromagnetic Relay (7511A)

Product specifications: 012Vd. c, 028Vd. c
Load: 100MHz, 500W, 1 * 10 ^ 5 times
Product size: 67mm * 24mm * 48mm
Product weight: �� 320g

Product Introduction:
The JPT-33FA RF electromagnetic relay (7511A) adopts the US military standard MIL-DTL-3928F [2003]. The product enterprise standard number is Q/RG20981-2013.

[electromagnetic relay]RF coaxial sealed DC relay (EN_1)

2026-4-22 14:59:43

JPT-1MN RF coaxial sealed DC relay (379N)

Load:
0.5A,28VDC
Product dimensions:
��49mm×52mm
Product weight:
��350g

Product Introduction:
JPT-1MN RF coaxial sealed DC relay (379N) can be widely used in RF signal conversion circuits such as radio stations and antennas.

[electromagnetic relay]7510) RF coaxial DC electromagnetic relay

2026-4-22 14:59:39

JPT-9F RF coaxial DC electromagnetic relay (7510)

Product specifications: 012Vd. c, 028Vd. c
Load: 1GHz, 100W, 1 * 10 ^ 5 times
Product size: �� 40mm * 40mm
Product weight: �� 235g

Product Introduction:
The JPT-9F RF coaxial DC electromagnetic relay (7510) adopts the US military standard MIL-DTL-3928F [2003]. The product enterprise standard number is Q/RG20955-2012.

[electromagnetic relay]7274) Small and Medium Power Sealed DC Electromagnetic Relay

2026-4-22 14:59:35

JZX-6005M Small and Medium Power Sealed DC Electromagnetic Relay (7274)

Product specifications: 12VDC 28VDC
Load: 5A, 28VDC
Product size: 28.6mm × 20.6mm × 16.8mm
Product weight: �� 40g

Product Introduction:
JZX-6005M small and medium power sealed DC electromagnetic relay (7274) has strong environmental adaptability and is widely used in the fields of aerospace, aviation, ships, weapons, electronics, etc. for circuit switching.

[electromagnetic relay]JZC-57M Ultra small medium power sealed DC electromagnetic relay (7139)}

2026-4-22 14:59:31

JZC-57M ultra small medium power sealed DC electromagnetic relay (7139)

Product specifications: 6VDC, 12VDC, 27VDC
Load: 5A, 28VDC
Product size: 15.5mm × 8.2mm × 10mm
Product weight: �� 5g

JZC-57M ultra small medium power sealed DC electromagnetic relay (7139) introduction:
Small size, high load capacity, strong environmental adaptability, suitable for changing circuits in aviation, aerospace, ground electronic equipment and other automatic control devices.

[electromagnetic relay]Intermediate power DC electromagnetic relay (EN_1)

2026-4-22 14:59:27

JZ-16F Medium Power DC Electromagnetic Relay (7327)

Product specifications: 6VDC 12VDC 24VDC 27VDC
Load: 5A, 30VDC
Product size: 44mm × 34mm × 54mm
Product weight: �� 120g

Product Introduction:
JZ-16F medium power DC electromagnetic relay (7327) is a DC relay with four sets of conversion contacts, which can replace similar foreign products and is widely used for switching circuits in aviation and other fields.

[electromagnetic relay]7323) Small and Medium Power DC Electromagnetic Relay

2026-4-22 14:59:23

JZX-44F Small Medium Power DC Electromagnetic Relay (7323)

Specification: 27VDC
Load: 5A, 27VDC
Product size: 43.8mm × 24.8mm × 46mm
Product weight: �� 100g

JZX-44F Small and Medium Power DC Electromagnetic Relay (7323) Introduction: This product is small in size, light in weight, and has strong environmental adaptability. It can be widely used in various fields such as aerospace and aviation electronics.

[electromagnetic relay]7324) Small DC Electromagnetic Relay

2026-4-22 14:59:19

JZX-45F Small DC Electromagnetic Relay (7324)

Product specification: 27VDC
Load: 5A, 28VDC
Product size: 43.6mm × 34.6mm × 50.5mm
Product weight: �� 140g
Product Introduction:
JZX-45F small DC electromagnetic relay (7324) has a small volume, light weight, and strong environmental adaptability, and can be widely used in various fields such as aerospace and aviation electronics.

[electromagnetic relay]7325) Small DC Electromagnetic Relay

2026-4-22 14:59:15

JZX-46M Small DC Electromagnetic Relay (7325)
Product specification: 27VDC
Load: 5A, 28VDC
Product size: 43.6mm × 46.6mm × 50.5mm
Product weight: �� 180g

Introduction:
JZX-46M small DC electromagnetic relay (7325) has small size, light weight, reliable operation, strong environmental adaptability, and can be widely used in various fields such as aerospace and aviation electronics.

[electromagnetic relay]JRW-16M type miniature sealed DC electromagnetic relay

2026-4-22 14:59:11

JRW-16M miniature sealed DC electromagnetic relay has a small volume and light weight, and can be widely used for circuit swapping in aerospace, aviation and other fields

Product specifications: 5VDC, 6VDC, 9VDC, 12VDC, 18VDC, 24VDC, 27VDC
Load: 0.5A, 28VDC
Product size: 8.5mm × 8.5mm × 10mm
Product weight: �� 4.3g

[electromagnetic relay]DJ160M type ultra small weak power sealed DC electromagnetic relay

2026-4-22 14:59:08

The DJ160M ultra small weak power sealed DC electromagnetic relay has four sets of conversion contacts and adopts a balanced rotating armature and dual coil electromagnetic system. It has a compact structure, small volume, light weight, good working reliability, high sensitivity, impact resistance, and vibration resistance. It is suitable for changing circuits in mobile electronic communication equipment and automatic control devices under harsh environmental conditions.

Product specification: 110VDC
Load: 0.5A, 28VDC; 0.03A,110VDC
Product size: 21mm × 11mm × 24mm
Product weight: �� 19g

[electromagnetic relay]JRW-221MC type miniature sealed DC electromagnetic relay

2026-4-22 14:59:05

JRW-221MC miniature sealed DC electromagnetic relay has a small volume and light weight, and can be widely used for circuit swapping in aerospace and other fields

Product specifications: 5VDC, 6VDC, 9VDC, 12VDC, 15VDC, 18VDC, 27VDC
Load: 0.5A.28VDC
Product size: 8.5mm × 8.5mm × 7.3mm
Product weight: �� 2.7g

[electromagnetic relay]JRC-7M type ultra small weak power sealed DC electromagnetic relay

2026-4-22 14:59:01

The JRC-7M relay has four sets of conversion contacts, with a compact structure, small size, light weight, and is suitable for switching circuits in mobile electronic, communication equipment, and automatic control devices

Product specifications: 12VDC, 16VDC, 18VDC, 24VDC, 27VDC, 36VDC
Load: 0.5A, 28VDC
Product size: 21mm × 11mm × 24mm
Product weight: �� 19g

[electromagnetic relay]JRW-6M type miniature weak power sealed DC electromagnetic relay

2026-4-22 14:58:58

JRW-6M relay is small in size and light in weight, suitable for use in devices with integrated circuits, communication equipment, automatic devices, and electronic devices for controlling or switching circuits.

Product specifications: 5VDC, 6VDC, 12VDC, 27VDC
Load: 0.5, 27VDC
Product size: �� 8.6mm × 10.5mm
Product weight: �� 2.8g

[electromagnetic relay]JRW-20M type miniature sealed DC electromagnetic relay

2026-4-22 14:58:54

JRW-20M miniature sealed DC electromagnetic relay has a small volume and light weight, and can be widely used for circuit swapping in aerospace and other fields

Product specifications: 5VDC, 6VDC, 9VDC, 12VDC, 18VDC, 24VDC, 27VDC
Load: 0.5A.28VDC
Product size: 8.5mm × 8.5mm × 7.3mm
Product weight: �� 3g

[electromagnetic relay]JRW-222MA Miniature Sealed Electromagnetic Relay

2026-4-22 14:58:51

JRW-222MA miniature sealed electromagnetic relay has a small volume, light weight, reliable operation, and strong environmental adaptability. Widely applicable to various fields such as aerospace, aviation electronics, etc

Product specifications: 5, 6, 9, 12, 18, 24, 27VDC
Load: 0.5A, 28VDC
Product size: 8.5mm × 8.5mm × 7.3mm
Product weight: �� 3g

[electromagnetic relay]JRC-1M type ultra small weak power sealed DC electromagnetic relay

2026-4-22 14:58:48

JRC-1M electromagnetic relay has the characteristics of small size, light weight, and high sensitivity, and is suitable for switching circuits in communication equipment, automatic devices, and mobile electronic devices

Product specifications: 3mADC, 4mADC, 6mADC, 10mADC, 20mADC, 40mADC
Load: 0.2A, 30VDC;
Product size: �� 11mm × 25mm
Product weight: �� 9g

[electromagnetic relay]JRW-241MA Miniature Sealed DC Electromagnetic Relay

2026-4-22 14:58:45

JRW-241MA miniature sealed DC electromagnetic relay has a small volume and light weight, and can be widely used for circuit swapping in aerospace and other fields

Product specifications: 5VDC, 6VDC, 9VDC, 12VDC, 18VDC, 24VDC, 27VDC
Load: 10-50 �� A, 10-50mV 0.5A, 28VDC 1A, 28VDC
Product size: �� 11mm × 25mm
Product weight: �� 9g

[electromagnetic relay]JRW-240MA Miniature Sealed DC Electromagnetic Relay

2026-4-22 14:58:42

JRW-240MA miniature sealed DC electromagnetic relay has a small volume and light weight, and can be widely used for circuit swapping in aerospace and other fields

Product specifications: 5VDC, 6VDC, 9VDC, 12VDC, 18VDC, 24VDC, 27VDC
Load: 10-50 �� A, 10-50mV 0.5A, 28VDC 1A, 28VDC
Product size: 8.5mm × 8.5mm × 10mm
Product weight: �� 4.3g

[electromagnetic relay]JRW-242MA Miniature Sealed DC Electromagnetic Relay

2026-4-22 14:58:39

JRW-242MA miniature sealed DC electromagnetic relay has a small volume and light weight, and can be widely used for circuit swapping in aerospace and other fields

Product specifications: 5VDC, 6VDC, 9VDC, 12VDC, 18VDC, 24VDC, 27VDC
Load: 10-50 �� A, 10-50mV; 0.5A,28VDC�� 1A,28VDC
Product size: 8.5mm × 8.5mm × 10mm
Product weight: �� 4.3g

[electromagnetic relay]JRC-130M type ultra small weak power sealed DC electromagnetic relay

2026-4-22 14:58:36

The JRC-130M ultra small weak power sealed DC electromagnetic relay has a small volume, light weight, and high impact index, and can be widely used for circuit swapping in aviation, aerospace, and other fields.

Product specifications: 5VDC, 6VDC, 9VDC, 12VDC, 15VDC, 18VDC, 27 (28) VDC
Load: 1A, 28VDC
Product size: 15.5mm × 8.2mm × 8.2mm
Product weight: �� 4.8g

[electromagnetic relay]JQX-127MA Type Small Sealed DC Electromagnetic Relay

2026-4-22 14:58:33

The JQX-127MA small sealed DC electromagnetic relay is a 1.5 cubic inch balanced force relay, with six sets of conversion contacts, capable of switching 1A, 72Vd. c. resistive loads, and gold-plated pins. It is mainly used for switching circuits in electric locomotives

Product specifications: 6, 9, 12, 18, 24, 28, 36, 48, 72, 110VDC
Load: 1A, 72VDC
Product size: 36mm × 26mm × 26mm
Product weight: �� 100g

[electromagnetic relay]JRC-200MD type ultra small weak power sealed DC electromagnetic relay

2026-4-22 14:58:29

JRC-200MD relay has a small volume, light weight, reliable operation, and strong environmental adaptability. It can be widely used in various fields such as aerospace and aviation electronics.

Product specifications:
5VDC��6VDC��9VDC��12VDC��18VDC��27VDC��36VDC
Load: 1A, 28VDC
Product size: 15.5mm × 8.2mm × 8.2mm
Product weight: �� 4.8g

[electromagnetic relay]JRW-4M type miniature weak power sealed DC electromagnetic relay

2026-4-22 14:58:26

JRW-4M relay has a small volume, light weight, compact structure, reliable operation, strong environmental adaptability, and is suitable for control or circuit switching in fields such as automatic devices and electronic equipment.

Product specifications: 5VDC, 12VDC
Load: 0.5A, 28VDC
Product size: �� 8.5mm × 10.5mm
Product weight: �� 2.6g

[electromagnetic relay]JRW-221MA Miniature Sealed DC Electromagnetic Relay

2026-4-22 14:58:23

JRW-221MA miniature sealed DC electromagnetic relay has a small volume and light weight, and can be widely used for circuit swapping in aerospace and other fields

Product specifications: 5VDC, 6VDC, 9VDC, 12VDC, 18VDC, 24VDC, 27VDC
Load: 1A, 28VDC 0.5A, 28VDC 0.25A, 115VAC 10-50 �� A, 10-50mV
Product size: 8.5mm × 8.5mm × 7.3mm
Product weight: �� 3g

[electromagnetic relay]JRC-24M Ultra small Sealed DC Electromagnetic Relay

2026-4-22 14:58:20

JRC-24M ultra small sealed DC electromagnetic relay is an ultra small sealed DC electromagnetic relay, which adopts metal fusion welding sealing. The product has a small volume, multiple components, long lifespan, and strong environmental adaptability. It can be widely used for changing circuits in aerospace, aviation, ground electronic equipment, and other automatic control devices

Product specification: 27 (28) VDC
Load: 1A, 28VDC
Product size: 12mm × 9mm × 15mm
Product weight: �� 8g

[electromagnetic relay]JRX-31MD Type Small Low Power Sealed DC Electromagnetic Relay

2026-4-22 14:58:17

JRX-31MD relay has high sensitivity and stable high voltage resistance, suitable for switching circuits in mobile electronic devices such as power automatic control and communication equipment

Product specifications: 4.5VDC, 6VDC, 9VDC, 12VDC, 15VDC, 18VDC, 24VDC
Load: 1A, 28VDC
Product size: 25mm × 15mm × 30mm
Product weight: �� 20g

[electromagnetic relay]JRW-8MA type miniature weak power sealed DC electromagnetic relay

2026-4-22 14:58:14

JRW-8MA relay has small size, light weight, compact structure, strong environmental adaptability, and is equipped with diodes for coil transient suppression and coil protection. Suitable for missiles and aircraft
Switching circuits in electronic devices and automatic devices

Product specifications: 5VDC, 6VDC, 9VDC, 12VDC, 18VDC, 26.5VDC
Load: 1A, 28VDC
Product size: �� 8.5mm × 9.53mm
Product weight: �� 4.25g

[electromagnetic relay]JRC-071M type ultra small weak power sealed DC electromagnetic relay

2026-4-22 14:58:10

JRC-071M relay has four sets of conversion contacts, which are small in size, light in weight, reliable in operation, and easy to use. It can be widely used in electronic devices as a conversion circuit

Product specifications: 6VDC, 12VDC, 27 (28) VDC
Load: 1A, 28VDC; 2A,28VDC
Product size: 21mm × 11mm × 11.5mm
Product weight: �� 11g

[electromagnetic relay]JZC-1M Type Ultra small Medium Power Sealed DC Electromagnetic Relay

2026-4-22 14:58:07

JZC-1M relay has a compact structure, small size, light weight, vibration and impact resistance, and can reliably work under harsh environmental conditions. It is suitable for circuit switching in mobile electronic, communication equipment and automatic control devices

Product specifications: 6VDC, 12VDC, 18VDC, 24VDC, 27VDC
Load: 1A, 27VDC; 2A,27VDC
Product size: 21mm × 11mm × 11mm
Product weight: �� 11g

[electromagnetic relay]JZX-26M Type Small Medium Power Sealed DC Electromagnetic Relay

2026-4-22 14:58:04

JZX-26M relay is a medium power signal relay mainly used for ground fixed or mobile power protection and distribution control systems. It is used as a signal interface between DC electronic circuits and AC/DC strong current circuits, and can also be used for switching various electronic and control equipment circuits.

Product specifications: 48VDC, 24VDC, 18VDC, 12VDC
Load: 220VDC, 30W; 220VDC,0.2A(�ӣ�5×10); 2A,27VDC
Product size: 28mm × 13.5mm × 33
Product weight: �� 40g

[electromagnetic relay]JRC-5M type ultra small weak power sealed DC electromagnetic relay

2026-4-22 14:58:01

JRC-5M relay has a simple structure, small size, and high sensitivity, suitable for use in automatic devices, communication equipment, instrument and electronic equipment for control or circuit switching

Product specifications: 24VDC, 12VDC, 6VDC, 3VDC, 18VDC, 5VDC
Load: 1A, 27VDC
Product size: Ø 12.5mm × 15
Product weight: �� 6g

[electromagnetic relay]JZC-1MA Type Ultra small Medium Power Sealed DC Electromagnetic Relay

2026-4-22 14:57:58

JZC-1MA relay has the advantages of small size, light weight, and high sensitivity, and is suitable for changing circuits in mobile electronic, communication equipment, and automatic control devices

Product specifications: 5VDC, 6VDC, 12VDC, 24VDC
Load: 1A, 27VDC; 0.5A,27VDC
Product size: 21mm × 11mm × 11mm
Product weight: �� 10g

[electromagnetic relay]JRC-26M Type Miniature Sealed DC Electromagnetic Relay

2026-4-22 14:57:54

JRC-26M relay is small in size, light in weight, reliable in operation, and easy to use. It can be widely used in electronic devices as a switching circuit.

Product specifications: 6VDC, 12VDC, 18VDC, 27VDC, 28VDC
Load: 1A, 28VDC
Product size: 10.5mm × 5.5mm × 13
Product weight: �� 4g

[electromagnetic relay]791) type ultra small medium power sealed DC electromagnetic relay (791))

2026-4-22 14:57:51

The JZC-20M relay adopts a balanced force structure, with stable performance and strong environmental adaptability. It is suitable for changing circuits in equipment with harsh environmental conditions such as aerospace and aviation

Product specification: 28VDC
Load: 5A, 28VDC; 5A,115/200VAC��400Hz��
Product size: 20.6mm × 10.6mm × 16.8mm
Product weight: �� 16g

[electromagnetic relay]768) type ultra small weak power sealed DC electromagnetic relay (768))

2026-4-22 14:57:47

JRC-10MA relay has small size, light weight, reliable operation, and strong environmental applicability, and can be widely used in the fields of aerospace and aviation for circuit swapping.

Product specifications: 6VDC, 12VDC, 27VDC, 28VDC
Load: 1A, 30VDC
Product size: 13mm × 6mm × 11mm
Product weight: �� 4g

[electromagnetic relay]7015) Type Miniature Sealed DC Electromagnetic Relay

2026-4-22 14:57:44

JRW-220MC miniature sealed DC electromagnetic relay has a small volume and light weight, and can be widely used for circuit swapping in aerospace and other fields

Product specifications: 5VDC, 6VDC, 9VDC, 12VDC, 18VDC, 24VDC, 27VDC
Load: 1A, 28VDC; 0.5A,28VDC�� 0.25A,115VAC�� 10��50��A,10��50mV
Product size: 8.5mm × 8.5mm × 7.3mm
Product weight: �� 2.7g

[electromagnetic relay]JRW-210/211M type miniature weak power sealed DC electromagnetic relay

2026-4-22 14:57:41

JRW-210/211M miniature weak power sealed DC electromagnetic relay has a small volume, light weight, compact structure, and strong environmental adaptability. It is suitable for control or conversion circuits in military communication equipment, automatic devices, electronic equipment and other fields

Product specifications: 5VDC, 6VDC, 9VDC, 12VDC, 18VDC, 26.5VDC
Load: 1A, 28VDC
Product size: �� 8.5mm × 7.11mm
Product weight: �� 2.55g

[electromagnetic relay]Micro sealed DC electromagnetic relay with reliability index of JRW-240MB type

2026-4-22 14:57:38

JRW-240MB miniature sealed DC electromagnetic relay with reliability indicators has a small volume and light weight, and can be widely used for circuit swapping in aerospace and other fields

Product specifications: 5VDC, 6VDC, 9VDC, 12VDC, 18VDC, 27VDC
Load: 1A, 28VDC
Product size: 8.5mm × 8.5mm × 10mm
Product weight: �� 4.3g

[electromagnetic relay]2071) type ultra small weak power sealed DC electromagnetic relay (2071))

2026-4-22 14:57:35

JRC-26MA ultra small weak power sealed DC electromagnetic relay has a small volume, light weight, reliable operation, simple use, and can be widely used in electronic devices as a switching circuit

Product specifications: 6VDC, 12VDC, 27VDC
Load: 1A, 28VDC
Product size: 10.5mm × 5.5mm × 10.8mm
Product weight: �� 4g

[electromagnetic relay]7004) Type Miniature Low Power Sealed DC Electromagnetic Relay (7004)})

2026-4-22 14:57:31

JRW-110MT miniature weak power sealed DC electromagnetic relay is small in size, light in weight, and compact in structure, suitable for control or circuit switching in mobile electronic devices

Product specifications: 5VDC, 6VDC, 9VDC, 12VDC, 18VDC, 27VDC
Load: 1A, 28VDC
Product size: �� 8.5mm × 7.1mm
Product weight: �� 3g

[electromagnetic relay]7001) Type Miniature Sealed DC Electromagnetic Relay

2026-4-22 14:57:28

JRC-25M ultra small sealed DC electromagnetic relay has a compact structure and strong environmental adaptability, and can be widely used for circuit swapping in aerospace and other fields

Product specifications: 3VDC, 5VDC, 6VDC, 9VDC, 12VDC, 15VDC, 18VDC, 20VDC, 28VDC
Load: 0.5A, 28VDC; 1A,28VDC
Product size: 10mm × 10mm × 11mm
Product weight: �� 4g

[electromagnetic relay]7005) Type Miniature Low Power Sealed DC Electromagnetic Relay (7005)})

2026-4-22 14:57:25

JRW-110MC miniature weak power sealed DC electromagnetic relay has a small volume and light weight, suitable for control or circuit switching in mobile electronic devices

Product specifications: 5VDC, 6VDC, 9VDC, 12VDC, 18VDC, 27VDC
Load: 1A, 28VDC
Product size: �� 8.5mm × 7.1mm
Product weight: �� 3g

[electromagnetic relay]7006) Type Miniature Low Power Sealed DC Electromagnetic Relay (7006)})

2026-4-22 14:57:22

JRW-111MT miniature weak power sealed DC relay has a small volume and light weight, suitable for control or circuit switching in mobile electronic devices

Specifications: 5VDC, 6VDC, 9VDC, 12VDC, 18VDC, 27VDC
Load: 1A, 28VDC
Product size: �� 8.5mm × 7.1mm
Product weight: �� 3g

[electromagnetic relay]7007) Type Miniature Low Power Sealed DC Electromagnetic Relay (7007)})

2026-4-22 14:57:19

JRW-111MC miniature weak power sealed DC electromagnetic relay has a small volume and light weight, suitable for control or circuit switching in mobile electronic devices

Specifications: 5VDC, 6VDC, 9VDC, 12VDC, 18VDC, 27VDC
Load: 1A, 28VDC
Product size: �� 8.5mm × 7.1mm
Product weight: �� 3g

[electromagnetic relay]7008) Type Miniature Low Power Sealed DC Electromagnetic Relay (7008)})

2026-4-22 14:57:16

JRW-130MC miniature weak power sealed DC electromagnetic relay has a small volume and light weight, suitable for control or circuit switching in mobile electronic devices

Product specifications: 5VDC, 6VDC, 9VDC, 12VDC, 18VDC, 27VDC
Load: 1A, 28VDC
Product size: �� 8.5mm × 9.7mm
Product weight: �� 3g

[electromagnetic relay]7010) Type Miniature Low Power Sealed DC Electromagnetic Relay (7010)})

2026-4-22 14:57:13

JRW-131MC miniature weak power sealed DC electromagnetic relay has a small volume and light weight, suitable for controlling or switching circuits in mobile electronic devices

Product specifications: 5VDC, 6VDC, 9VDC, 12VDC, 18VDC, 27VDC
Load: 1A, 28VDC
Product size: �� 8.5mm × 9.7mm
Product weight: �� 3g

[electromagnetic relay]Miniature Sealed DC Electromagnetic Relay (EN_1)

2026-4-22 14:57:10

JRW-220MA miniature sealed DC electromagnetic relay has a small volume and light weight, and can be widely used for circuit swapping in aerospace and other fields.

Product specifications: 5VDC, 6VDC, 9VDC, 12VDC, 18VDC, 24VDC, 27VDC
Load: 1A, 28VDC; 0.25A,115VAC; 10��50µA 10��50mV
Product size: 8.5mm × 8.5mm × 7.3mm
Product weight: �� 3g

[electromagnetic relay]7012) Type Miniature Sealed DC Electromagnetic Relay

2026-4-22 14:57:06

JRW-16MA miniature sealed DC electromagnetic relay has a small volume and light weight, and can be widely used for circuit swapping in aviation, aerospace and other fields

Product specifications: 3VDC, 5VDC, 6VDC, 9VDC, 12VDC, 15VDC, 18VDC, 24VDC, 27VDC
Load: 1A, 28VDC 0.5A, 28VDC 0.25A, 115VAC 10-50 �� A, 10-50mV
Product size: 8.5mm × 8.5mm × 10mm
Product weight: �� 4.3g

[electromagnetic relay]254) ultra small weak power sealed DC relay (254)})

2026-4-22 14:57:03

JRC-105M ultra small weak power sealed DC relay has a small volume, light weight, multiple contact groups, reliable operation, strong environmental adaptability, and can be widely used in various fields such as aerospace, aviation, electronics, etc

Product specifications: 6VDC, 12VDC, 27 (28) VDC
Load: 1A, 28VDC
Product size: 21mm × 11mm × 11mm
Product weight: �� 10g

[electromagnetic relay]7009) Type Miniature Low Power Sealed DC Electromagnetic Relay (7009)})

2026-4-22 14:57:00

JRW-131MT miniature weak power sealed DC electromagnetic relay has a small volume and light weight, suitable for control or circuit switching in mobile electronic devices

Product specifications: 5VDC, 6VDC, 9VDC, 12VDC, 18VDC, 27VDC
Load: 1A, 28VDC
Product size: �� 8.5mm × 9.7mm
Product weight: �� 3g

[electromagnetic relay]332) Type Small Low Power DC Electromagnetic Relay

2026-4-22 14:56:57

The JRX-10 relay is a closed type relay with a compact, simple structure, small size, and light weight, which can work under poor environmental conditions. Suitable for switching circuits in mobile electronic, communication equipment, and signal devices.

Product specifications: 60VDC, 36VDC, 9VDC, 72VDC, 27VDC, 12VDC, 9VDC
Load: 2A, 30VDC; 0.5A��115VDC
Product size: 16mm × 10.6mm × 19.5mm
Product weight: �� 7g

[electromagnetic relay]2129) type ultra small medium power sealed DC electromagnetic relay (2129))

2026-4-22 14:56:54

JZC-098M ultra small medium power sealed DC electromagnetic relay has four sets of conversion contacts, small size, light weight, and has coil transient suppression function. It can be widely used as a conversion circuit in electronic devices

Product specifications: 6VDC, 12VDC, 27VDC
Load: 2A, 28VDC; 1A,28VDC
Product size: 21mm × 11mm × 11.5mm
Product weight: �� 11g

[electromagnetic relay]369) Type Small Medium Power Sealed Electromagnetic Relay (High Temperature Resistant)

2026-4-22 14:56:51

The JZX-10M small to medium power sealed electromagnetic relay (high temperature resistant) (369) adopts a balanced rotating armature and a double coil electromagnetic system. It has a compact structure, small volume, light weight, good working reliability, high sensitivity, impact resistance, vibration resistance, and high temperature rating. It is suitable for changing circuits in mobile electronic communication equipment and automatic control devices under harsh environmental conditions.

Product specifications: 27VDC, 48VDC
Load: 2A, 28VDC; 0.5A,115VAC
Product size: 21mm × 11mm × 25mm
Product weight: �� 20g

[electromagnetic relay]2146) type ultra small weak power sealed DC electromagnetic relay (2146))

2026-4-22 14:56:47

JRC-4M ultra small weak power sealed DC electromagnetic relay has a small volume, multiple contact groups, high sensitivity, and can be widely used for circuit switching in aerospace, aviation and other fields

Product specifications: 12VDC, 27VDC
Load: 2A, 28V
Product size: 25mm × 15mm × 23.5mm
Product weight: �� 30g

[electromagnetic relay]7124) Ultra small Sealed Electromagnetic Relay

2026-4-22 14:56:44

JZC-52M ultra small sealed electromagnetic relay (7124) is an ultra small sealed DC electromagnetic relay, which adopts metal fusion welding sealing. The product has a small volume and dimensions of 10.5X6X13 (max). It has a set of conversion contacts with a rated load of 2A and 28VDC (resistive). It can be widely used for switching circuits in aviation, aerospace, and ground electronic equipment

Product specification: 27 (28) VDC
Load: 2A, 28VDC
Product size: 10.5mm × 6mm × 13mm
Product weight: �� 4g

[electromagnetic relay]DJ170M Type Small Medium Power Sealed Electromagnetic Relay

2026-4-22 14:56:41

The DJ170M relay is a medium power signal relay mainly used for ground fixed or mobile power protection and distribution control systems. It is used as a signal interface between DC electronic circuits and AC/DC strong current circuits, and can also be used for switching various electronic and control equipment circuits.

Product specification: 110VDC
Load: 5A, 28VDC; 2A,110VDC
Product size: 25mm × 15mm × 30mm
Product weight: �� 35g

[electromagnetic relay]9006) type ultra small medium power sealed DC electromagnetic relay (9006))

2026-4-22 14:56:38

JZC-30ME relay has a small volume, light weight, reliable operation, and strong environmental adaptability. It can be widely applied in various fields such as aerospace and aviation electronics.

Product specifications: 5VDC, 6VDC, 12VDC, 18VDC, 24VDC, 27VDC
Load: 2A, 28VDC
Size: 20.5mm × 10.5mm × 10.5mm
Weight: �� 13g

[electromagnetic relay]DJ140M Type Ultra small Medium Power Sealed DC Electromagnetic Relay

2026-4-22 14:56:35

The DJ140M ultra small and medium power sealed DC electromagnetic relay has a compact structure and adopts a balanced rotating armature, which is resistant to vibration and impact, and can work reliably under harsh environmental conditions. It also has a high withstand voltage value and is suitable for circuit switching in mobile electronic, communication equipment, and automatic control devices.

Product specification: 12VDC
Load: 2A, 28VDC
Product size: 21mm × 11mm × 11mm
Product weight: �� 11g

[electromagnetic relay]DJ143M Type Ultra small Medium Power Sealed DC Electromagnetic Relay

2026-4-22 14:56:31

The DJ143M ultra small medium power sealed DC electromagnetic relay has a compact structure and adopts a balanced rotating armature, which is resistant to vibration and impact, and can reliably work under harsh environmental conditions. It is suitable for use in mobile electronic, communication equipment, and automatic control devices for circuit switching.

Product specification: 12VDC
Load: 2A, 28VDC; 0.6A,110VDC
Product size: 21mm × 11mm × 11mm
Product weight: �� 11g

[electromagnetic relay]7101) type ultra small medium power sealed DC electromagnetic relay (7101))

2026-4-22 14:56:28

JZC-46M ultra small medium power sealed DC electromagnetic relay has six sets of conversion contacts, small size, high sensitivity, and can reliably work under harsh conditions. It can be used for circuit switching in mobile communication equipment and automatic control devices

Product specifications: 6VDC, 12VDC, 24VDC, 27 (28) VDC
Load: 2A, 28VDC; 1A,28VDC
Product size: 21mm × 11mm × 25mm
Product weight: �� 20g

[electromagnetic relay]7110) type ultra small medium power sealed DC electromagnetic relay (7110))

2026-4-22 14:56:25

JZC-084M ultra small medium power sealed DC electromagnetic relay has a small volume, light weight, and strong environmental adaptability. Widely applicable for circuit swapping in aerospace, aviation and other fields

Product specifications: 6VDC, 12VDC, 24VDC, 27VDC
Load: 2A, 28VDC; 1A,28VDC
Product size: 15.5mm × 15.5mm × 8.2mm
Product weight: �� 10g

[electromagnetic relay]7204) Small and Medium Power Sealed DC Electromagnetic Relay (7204)})

2026-4-22 14:56:22

JZX-42M small and medium power sealed DC electromagnetic relay (7204) has a reasonable structure, multiple contact groups, and strong environmental adaptability. It can be widely used for circuit switching in electronic devices with harsh environments such as aviation and aerospace

Product specification: 28VDC
Load: 2A, 28VDC
Product size: 26mm × 18mm × 26mm
Product weight: �� 42g

[electromagnetic relay]251) type ultra small medium power sealed DC electromagnetic relay (251))

2026-4-22 14:56:19

JZC-090M ultra small medium power sealed DC electromagnetic relay has a small volume, light weight, reliable operation, and strong environmental adaptability. Widely applicable to various fields such as aerospace, aviation electronics, etc

Product specifications: 6VDC, 12VDC, 15VDC, 24VDC, 28VDC
Load: 2A, 28VDC
Product size: 21mm × 11mm × 11mm
Product weight: �� 10g

[electromagnetic relay]435) Small and Medium Power Sealed DC Electromagnetic Relay (435)})

2026-4-22 14:56:16

JZX-6MA relay is small in size and light in weight, with six sets of conversion contacts, suitable for changing circuits in mobile electronic, communication equipment, and automatic control devices

Product specifications: 27VDC, 26VDC, 12VDC
Load: 2A, 27VDC
Product size: Ø 31mm × 34mm
Product weight: �� 75g

[electromagnetic relay]742D) type ultra small airtight sealed DC electromagnetic relay (742D)})

2026-4-22 14:56:13

The KJZC-30MD ultra small airtight sealed DC electromagnetic relay with transient suppression and reliability indicators has the characteristics of small volume, large load, strong shock and vibration resistance, and an efficiency level of L. It can be used in electronic equipment with harsh environmental conditions such as aerospace, aviation, and ships

Product specifications: 5VDC, 6VDC, 12VDC, 18VDC, 24VDC, 27VDC
Load: 2A, 28VDC; 0.3A,115VAC; 0.5A,28VDC
Product size: 20.5mm × 10.5 × 11.5mm
Product weight: �� 13g

[electromagnetic relay]9008) Type Miniature Sealed DC Electromagnetic Relay

2026-4-22 14:56:09

The JRC-10MC relay has a small volume, compact structure, and stable performance, and can be widely used for circuit switching in aerospace, aviation, ground electronic equipment, and other automatic control devices.

Product specifications: 6VDC, 12VDC, 18VDC, 27VDC
Load: 2A, 28VDC; 3A,28VDC
Product size: 15.5mm × 8.2mm × 8.4mm
Product weight: �� 5g

[electromagnetic relay]718B) Type Miniature Sealed DC Electromagnetic Relay

2026-4-22 14:56:06

The JZC-200MB ultra small sealed DC electromagnetic relay with reliability indicators has a small volume, high contact switching power, compact structure, beautiful appearance, stable performance, and strong environmental adaptability. It can be used for circuit switching in electronic devices such as aerospace and aviation mobile communication equipment, automatic control devices, etc

Product specifications: 6VDC, 12VDC, 24VDC, 27VDC
Load: 2A, 28VDC 4A, 28VDC
Product size: 20.5mm × 10.5mm × 10.5mm
Product weight: �� 11g

[electromagnetic relay]718) type ultra small medium power sealed DC electromagnetic relay (718))

2026-4-22 14:56:03

The JZC-200M relay has a small volume, high contact switching power, compact structure, stable performance, and strong environmental adaptability. It can be used for switching circuits in aerospace and aviation mobile communication equipment, automatic control device electronic equipment.

Product specifications: 6VDC, 12VDC, 24VDC, 27VDC
Load: 4A, 30VDC
Product size: 20.5mm × 10.5mm × 10.5mm
Product weight: �� 13g

[electromagnetic relay]JRC-10M type ultra small weak power sealed DC electromagnetic relay

2026-4-22 14:56:00

JRC-10M ultra small weak power sealed DC electromagnetic relay has the characteristics of small size, light weight, sturdy structure, and compactness, and is suitable for switching circuits in communication equipment, automatic devices, and mobile electronic devices

Product specifications: 12VDC, 18VDC, 27VDC
Load: 0.5A, 27VDC 1A, 27VDC
Product size: 13.5mm × 6.5mm × 12.2mm
Product weight: �� 5g

[electromagnetic relay]DJ145M Type Ultra small Medium Power Sealed DC Electromagnetic Relay

2026-4-22 14:55:57

The DJ145M ultra small medium power sealed DC electromagnetic relay has a compact structure and adopts a balanced rotating armature, which is resistant to vibration and impact, and can reliably work under harsh environmental conditions. It is suitable for use in mobile electronic, communication equipment, and automatic control devices for circuit switching.

Product specifications: 12, 27VDC
Load: 4A, 28VDC; 0.12A,110VDC
Product size: 21mm × 11mm × 11mm
Product weight: �� 11g

[electromagnetic relay]2102) Type Miniature Sealed DC Electromagnetic Relay

2026-4-22 14:55:53

JRC-200MT ultra small sealed DC electromagnetic relay (2102) has a small volume, compact structure, beautiful appearance, and stable performance. It can be widely used for circuit switching in aerospace, aviation, ground electronic equipment, and other automatic control devices

Product specifications: 6VDC, 12VDC, 27 (28) VDC
Load: 4A, 28VDC; 2A,28VDC�� 2A,115VAC
Product size: 15.5mm × 8.2mm × 9.8mm
Product weight: �� 6g

[electromagnetic relay]354T) type ultra small medium power sealed DC electromagnetic relay (354T))

2026-4-22 14:55:50

JZC-1MT ultra small and medium power sealed DC electromagnetic relay (354T) has a compact structure and adopts a balanced rotating armature, which is resistant to vibration and impact, and can reliably work under harsh environmental conditions. It is suitable for switching circuits in mobile electronic, communication equipment, and automatic control devices

Product specifications: 6VDC, 12VDC, 18VDC, 27VDC
Load: 3A, 28VDC; 5A,28VD
Product size: 21mm × 11mm × 11mm
Product weight: �� 11g

[electromagnetic relay]246) type ultra small medium power sealed DC electromagnetic relay (246))

2026-4-22 14:55:47

JZC-200MY ultra small and medium power sealed DC electromagnetic relay has a small volume and light weight, and can be widely used for circuit switching in aerospace, aviation, and ground electronic equipment fields

Product specification: 24VDC
Load: 5A, 28VDC
Product size: 21mm × 11mm × 11mm
Product weight: �� 10g

[electromagnetic relay]793) type ultra small medium power sealed DC electromagnetic relay (793))

2026-4-22 14:55:44

JZC-40M ultra small and medium power sealed DC electromagnetic relay adopts a balanced force structure, with stable performance and strong environmental adaptability. It is suitable for switching circuits in equipment with harsh environmental conditions such as aviation and aerospace

Product specifications: 12VDC, 28VDC
Load: 5A, 28VDC; 5A,115/200VAC
Product size: 20.6mm × 20.6mm × 16.8mmm
Product weight: �� 28g

[electromagnetic relay]9005) type ultra small medium power sealed DC electromagnetic relay (9005))

2026-4-22 14:55:41

The JZC-200MK relay has a small volume, light weight, reliable operation, and strong environmental adaptability. It can be widely applied in various fields such as aerospace and aviation electronics.

Product specifications: 6VDC, 12VDC, 24VDC, 27VDC
Load: 4A, 28VDC; 5A,28VDC
Product size: 20.5mm × 10.5mm × 10.5mm
Product weight: �� 13g

[electromagnetic relay]7116) type ultra small medium power sealed DC electromagnetic relay (7116))

2026-4-22 14:55:38

JZC-50M ultra small and medium power sealed DC electromagnetic relay has small volume, large load capacity, and reliable operation, and can be widely used for circuit switching in fields such as aerospace and aviation

Product specifications: 6VDC, 12VDC, 27VDC
Load: 5A, 28VDC
Product size: 20.5mm × 10.5mm × 11.5mm
Product weight: �� 13g

[electromagnetic relay]7118) type ultra small medium power sealed DC electromagnetic relay (7118))

2026-4-22 14:55:34

JZC-20MA ultra small and medium power sealed DC electromagnetic relay is a balanced force structure, with small size, light weight, reliable operation, strong environmental adaptability, and can be widely used in various fields such as aerospace and aviation electronics

Product specifications: 6VDC, 12VDC, 28VDC
Load: 5A, 28VDC
Product size: 20.6mm × 10.5mm × 16.8mm
Product weight: �� 18g

[electromagnetic relay]DJ171M Type Small Medium Power Sealed Electromagnetic Relay

2026-4-22 14:55:31

The DJ171M relay is a medium power signal relay mainly used for ground fixed or mobile power protection and distribution control systems. It is used as a signal interface between DC electronic circuits and AC/DC strong current circuits, and can also be used for switching various electronic and control equipment circuits.

Product specification: 15VDC
Load: 5A, 28VDC; 2A,110VDC
Product size: 25mm × 15mm × 30mm
Product weight: �� 35g

[electromagnetic relay]252) type ultra small medium power sealed DC electromagnetic relay (252))

2026-4-22 14:55:28

JZC-078M relay has a small volume, light weight, reliable operation, and strong environmental adaptability. It can be widely applied in various fields such as aerospace, aviation, electronics, etc.

Product specifications: 5VDC, 6VDC, 12VDC, 24VDC, 27VDC, 28VDC
Load: 5A, 28VDC; 2A,115VAC
Product size: 20.5mm × 10.5mm × 11.5mm
Product weight: �� 11g

[electromagnetic relay]7123) type ultra small medium power sealed DC electromagnetic relay (7123))

2026-4-22 14:55:25

JZC-51M ultra small and medium power sealed DC electromagnetic relay has a small volume, multiple contact groups, strong load capacity, and strong environmental adaptability. It can be widely used for switching circuits in aerospace, aviation and other fields

JZC-51M ultra small medium power sealed DC electromagnetic relay (7123) specification: 27VDC
Load: 5A, 28VDC
Product size: 21mm × 11mm × 25mm
Product weight: �� 20g

[electromagnetic relay]354D) type ultra small medium power sealed electromagnetic relay (354D))

2026-4-22 14:55:21

The JZC-1MD ultra small and medium power sealed electromagnetic relay (354D) has a compact structure and adopts a balanced rotating armature, which is resistant to vibration and impact, and can reliably work under harsh environmental conditions. It is suitable for circuit switching in mobile electronic, communication equipment, and automatic control devices.

Product specifications: 12VDC, 28VDC
Load: 6A, 28VDC
Product size: 21mm × 11mm × 11mm
Product weight: �� 13g

[electromagnetic relay]203) Type Miniature Sealed Electromagnetic Relay

2026-4-22 14:55:18

JZC-200MT ultra small sealed electromagnetic relay (203) has a small volume, light weight, reliable operation, strong environmental adaptability, and can be widely used in various fields such as aerospace, aviation, electronics, etc.

Product specifications: 6VDC, 12VDC, 18VDC, 24VDC, 27VDC, 48VDC
Load: 6A, 30VDC
Product size: 20.5mm × 10.5mm × 11mm
Product weight: �� 11g

[electromagnetic relay]7205) Small high-power sealed DC electromagnetic relay (7205)})

2026-4-22 14:55:15

The JQX-67M small high-power sealed DC electromagnetic relay has a compact structure, multiple contact groups, and reliable operation. It can be widely used as a switching circuit in harsh environmental conditions such as aerospace and other fields

Product specification: 28VDC
Load: 6A, 28VDC
Product size: 29mm × 17mm × 29mm
Product weight: �� 50g

[electromagnetic relay]7115) type ultra small high-power sealed DC electromagnetic relay (7115))

2026-4-22 14:55:12

The JQC-320M ultra small high-power sealed DC electromagnetic relay adopts a balanced force structure, with a small volume, multiple contact groups, stable performance, and reliable operation. It can be widely used for circuit switching in aerospace, aviation and other fields

Product specifications: 6VDC, 12VDC, 28VDC
Load: 8A, 28VDC
Product size: 20.6mm × 20.6mm × 17mm
Product weight: �� 29g

[electromagnetic relay]795) type ultra small medium power sealed DC electromagnetic relay (795))

2026-4-22 14:55:08

The JZC-200MD relay has a small size, light weight, and can switch large pulse currents. It can be widely used for circuit switching in aerospace, aviation, and other fields.

Product specifications: 6VDC, 12VDC, 24VDC, 27VDC
Load: 2A, 30VDC; 5A,28VDC; 8A,28V
Product size: 20.5mm × 10.5mm × 11.5mm
Product weight: �� 11g

[electromagnetic relay]7201) Small high-power sealed DC electromagnetic relay (7201)})

2026-4-22 14:55:05

The JQX-15M relay has four sets of conversion contacts and a large contact capacity, making it suitable for switching circuits in communication equipment, automatic devices, and mobile electronic devices.

Product specifications: 12VDC, 24VDC, 27VDC, 48VDC, 110VDC
Load: 10A, 28VDC
Product size: 36mm × 21mm × 36mm
Product weight: �� 80g

[electromagnetic relay]759B) Small high-power sealed DC electromagnetic relay (759B)})

2026-4-22 14:55:02

The JQX-20MB small high-power sealed DC electromagnetic relay (759B) with reliability indicators has the characteristics of small size, large load, and resistance to vibration and impact. Its failure rate level is L, and it can be widely used in aerospace, aviation, ground electronic equipment, and other automatic control devices for circuit switching.

Product specifications: 6VDC, 12VDC, 24VDC, 48VDC
Load: 10A, 28VDC
Product size: 26mm × 13.5mm × 26mm
Product weight: �� 40g

[electromagnetic relay]7113) type ultra small high-power sealed DC electromagnetic relay (7113))

2026-4-22 14:54:59

The JQC-100M relay adopts a balanced force structure, with a large load capacity and small size, and can be widely used for circuit switching in aerospace, aviation and other fields

Product specifications: 12VDC, 28VDC
Load: 10A, 28VDC
Product size: 20.6mm × 10.5mm × 17mm
Product weight: �� 18g

[electromagnetic relay]7212) Small high-power sealed DC electromagnetic relay (7212)})

2026-4-22 14:54:55

The JQX-7122M small high-power sealed DC electromagnetic relay has a small volume, large load, good environmental adaptability, and easy installation. It is mainly used in electronic equipment in aerospace and other fields.
Product specifications: 6VDC, 12VDC, 24VDC, 48VDC
Load: 10A, 28VDC
Product size: 26mm × 13mm × 26mm
Product weight: �� 42g

[electromagnetic relay]225B) Small high-power sealed DC electromagnetic relay (225B)})

2026-4-22 14:54:52

JQX-63MB small high-power sealed DC electromagnetic relay has a compact structure, large load capacity, and is suitable for use in various fields for circuit switching

Product specifications: 12VDC, 24VDC, 27 (28) VDC
Load: 10A, 220VDC; 20A,28VDC
Product size: 36mm × 20mm × 21mm
Product weight: �� 50g

[electromagnetic relay]7216) Small high-power sealed DC electromagnetic relay (7216)})

2026-4-22 14:54:49

The JQX-20MC small high-power sealed DC electromagnetic relay has the characteristics of small size, large load, and resistance to vibration and impact. It can be widely used for circuit switching in aerospace, aviation, ground electronic equipment, and other automatic control devices.

Product specifications: 6, 12, 28VDC
Load: 25A, 28VDC
Product size: 26mm × 13.5mm × 26mm
Product weight: �� 40g

[electromagnetic relay]7229) type small high-power sealed DC electromagnetic relay (7229)})

2026-4-22 14:54:46

The JQX-135M small high-power sealed DC electromagnetic relay (7229) is a 1.5 cubic inch balanced force relay with four sets of switching contacts. It can switch between 25A, 28Vd. c. resistive loads and is widely used in harsh environmental conditions such as aerospace, aviation, and ships for switching circuits.

Product specifications: 6, 12, 28, 48VDC
Load: 25A, 28VDC
Product size: 36 × 26mm × 26mm
Product weight: �� 100g

[electromagnetic relay]225) Small high-power sealed DC electromagnetic relay (225)})

2026-4-22 14:54:39

JQX-63M small high-power sealed DC electromagnetic relay has a compact structure, large load capacity, and is suitable for use in various fields for circuit switching

Product specifications: 12VDC, 24VDC, 27 (28) VDC
Load: 20A, 28VDC; 25A,28VDC
Product size: 36mm × 20mm × 21mm
Product weight: �� 50g

[electromagnetic relay]High power sealed DC electromagnetic relay (EN_1)

2026-4-22 14:54:33

JQ-32M high-power sealed DC electromagnetic relay (7214) has a large contact capacity, compact structure, and strong environmental adaptability. It is widely used for switching circuits in ground electronic equipment

Product specification: 28VDC
Load: 30A, 320VDC; 16A��320VDC
Product size: 93mm × 60mm × 60mm
Product weight: �� 800g

[electromagnetic relay]7210) Small high-power sealed DC electromagnetic relay (7210)})

2026-4-22 14:54:30

The JQX-87M small high-power sealed DC electromagnetic relay is a balanced force structure with a large load capacity and reliable operation. It can be widely used as a switching circuit in aerospace, aviation and other fields

Product specification: 28VDC
Load: 30A, 28VDC
Product size: 26mm × 26mm × 30mm
Product weight: �� 75g

[electromagnetic relay]7222) Type Small High Power DC Electromagnetic Relay

2026-4-22 14:54:27

The JQX-125M small high-power DC electromagnetic relay has a small volume, large load, and strong environmental adaptability, and can be widely used for circuit swapping in aviation, aerospace, and other fields

Product specification: 28VDC
Load: 40A, 28VDC
Product size: 32.2mm × 22mm × 37mm
Product weight: �� 115g

[electromagnetic relay]2107D) Small high-power sealed DC electromagnetic relay (2107D)})

2026-4-22 14:54:24

The JQX-126M small high-power sealed DC electromagnetic relay has a small volume, large load, coil with transient suppression, and strong environmental adaptability. It is mainly used in aerospace, aviation, and other electronic equipment

Product specifications: 12VDC, 28VDC
Load: 50A, 28VDC
Product size: 26mm × 26mm × 30mm
Product weight: �� 80g

[electromagnetic relay]JQX-2107M type small high-power sealed DC electromagnetic relay

2026-4-22 14:54:21

JQX-2107M small high-power sealed DC electromagnetic relay has small volume, large load, and strong environmental adaptability, mainly used in aerospace, aviation, and other electronic equipment

Product specifications: 12VDC, 24VDC, 28VDC
Load: 50A, 28VDC
Product size: 26mm × 26mm × 30mm
Product weight: �� 80g

[electromagnetic relay]786) type high-power enclosed DC electromagnetic relay (786)})

2026-4-22 14:54:17

The JQ-9F high-power enclosed DC electromagnetic relay adopts a suction electromagnetic structure, two sets of bridge contacts, large electric shock capacity, low coil power consumption, and is used for circuit switching in ship and ground communication equipment

Product specification: 24VDC
Load: 60A, 120VDC
Product size: Ø 35mm × 45mm × 65mm
Product weight: �� 250g

[electromagnetic relay]7202) Small high-power sealed DC electromagnetic relay (7202)})

2026-4-22 14:54:14

The JQX-64M relay adopts a balanced force structure, with large contact capacity, stable structure, and strong environmental adaptability. It can be widely used for circuit swapping in electronic devices that require high loads.

Product specifications: 12VDC, 27VDC
Load: 80A, 28VDC
Size: 44mm × 28mm × 44
Weight: �� 245g

[electromagnetic relay]High power sealed DC electromagnetic relay (EN_1)

2026-4-22 14:54:11

The JQ-33M high-power sealed DC electromagnetic relay (7215) has a large contact capacity, compact structure, and strong environmental adaptability, and is widely used for switching circuits in ground electronic equipment.

Product specification: 28VDC
Load: 100A, 28VDC
Product size: 93mm × 60mm × 55mm
Product weight: �� 800g

[electromagnetic relay]2101) Small high-power sealed DC electromagnetic relay (2101)})

2026-4-22 14:54:07

The JQX-2101 small high-power sealed DC electromagnetic relay has a balanced force structure, large contact capacity, stable structure, and strong environmental adaptability. It can be widely used as a switching circuit in electronic devices that require high loads

Product specifications: 12VDC, 28VDC
Load: 100A, 28VDC; 100A,115VAC
Product size: 44.5mm × 28.5mm × 44.5mm
Product weight: �� 250g

[electromagnetic relay]JQX-117M type small high-power sealed DC electromagnetic relay

2026-4-22 14:54:04

The JQX-117M small high-power sealed DC electromagnetic relay has a small volume, light weight, reliable operation, strong environmental adaptability, and can be widely used in various fields such as aerospace and aviation electronics
Product specifications: 12VDC, 27VDC, 28VDC
Load: 12A, 220VDC; 20A,28VDC�� 15A,220VAC
Product size: 30mm × 18mm × 38mm
Product weight: �� 90g

[electromagnetic relay]JQX-129M type small high-power sealed DC electromagnetic relay

2026-4-22 14:54:01

The JQX-129M small high-power sealed DC electromagnetic relay is a balanced force relay with a compact structure and strong environmental adaptability. It can be widely used for circuit swapping in aerospace and other fields.

Product specifications: 6VDC, 12VDC, 28VDC, 48VDC
Load: 20A, 220VAC
Product size: 28mm × 44mm × 31mm
Product weight: �� 140g

[electromagnetic relay]JQX-128M type small high-power sealed DC electromagnetic relay

2026-4-22 14:53:57

The JQX-128M small high-power sealed DC electromagnetic relay has a small volume, large load, and strong environmental adaptability. It is mainly used in aerospace, aviation, and other electronic equipment

Product specification: 27VDC
Load: 20A, 28VDC
Product size: 30mm × 18mm × 31mm
Product weight: �� 80g

[electromagnetic relay]4JG-4A type small high-power sealed DC electromagnetic relay

2026-4-22 14:53:54

The 4JG-4A small high-power sealed DC electromagnetic relay has a small volume, large load capacity, and multiple contact groups, and can be widely used for circuit switching in environmental fields such as aerospace and aviation

Product specifications: 12VDC, 18VDC, 24VDC, 28VDC
Load: 20A, 27VDC
Product size: 32.6mm × 21.6mm × 37mm
Product weight: �� 105g

[electromagnetic relay]JQX-63MT type small high-power sealed DC electromagnetic relay

2026-4-22 14:53:51

The JQX-63MT small high-power sealed DC electromagnetic relay has a small volume, light weight, compact structure, stable performance, and can be widely used as a switching circuit in aerospace and ground electronic equipment as well as other automatic control systems

Product specifications: 12VDC, 24VDC, 27VDC
Load: 1H: 28V × 20A; 1D: 28V × 5A
Product size: 36mm × 20mm × 21mm
Product weight: �� 50g

[electromagnetic relay]JQX-88M type small high-power sealed DC electromagnetic relay

2026-4-22 14:53:48

The JQX-88M small high-power sealed DC electromagnetic relay is a 1 cubic inch balanced force relay with a compact structure and strong environmental adaptability. It can be widely used for circuit swapping in aerospace and other fields

Product specifications: 6VDC, 12VDC, 24VDC, 28VDC
Load: 15A, 28VDC
Product size: 26mm × 26mm × 26mm
Product weight: �� 80g

[electromagnetic relay]JQX-85M type small high-power sealed DC electromagnetic relay

2026-4-22 14:53:44

The JQX-85M small high-power sealed DC electromagnetic relay is a balanced force structure with a large load capacity and multiple sets of contacts. It can be widely used for circuit switching in aerospace and other fields.

Product specifications: 6VDC, 12VDC, 18VDC, 24VDC, 28VDC
Load: 10A, 28VDC
Product size: 26mm × 20mm × 26mm
Product weight: �� 60g

[electromagnetic relay]JQ-59M type high load electromagnetic relay (AC contactor)

2026-4-22 14:53:41

The JQ-59M high load electromagnetic relay product has a small volume, light weight, reliable operation, and strong environmental adaptability. Widely applicable to various fields such as aerospace, aviation electronics, etc

Product specification: 380VDC
Load: 40A, 28VDC
Product size: 56.5mm × 38mm × 52.5mm
Product weight: �� 380g

[electromagnetic relay]JQX-127M type small high-power sealed DC electromagnetic relay

2026-4-22 14:53:38

The JQX-127M small high-power sealed DC electromagnetic relay is a 1.5 cubic inch balanced force relay with six sets of conversion contacts. It has strong environmental adaptability and can be widely used for circuit switching in aerospace and other fields

Product specifications: 6VDC, 12VDC, 28VDC, 48VDC
Load: 10A, 28VDC
Product size: 26mm × 36mm × 26mm
Product weight: �� 100g

[electromagnetic relay]JQX-40MB type small high-power sealed DC electromagnetic relay

2026-4-22 14:53:34

The JQX-40MB small high-power sealed DC electromagnetic relay has the characteristics of small size, large load, and resistance to vibration and impact. It can be widely used for circuit switching in aerospace, aviation, ground electronic equipment, and other automatic control devices.

Product specifications: 6VDC, 12VDC, 28VDC, 48VDC
Load: 10A, 28VDC
Product size: 26mm × 26mm × 26mm
Product weight: �� 78g

[electromagnetic relay]JQX-86M type small high-power sealed DC electromagnetic relay

2026-4-22 14:53:31

The JQX-86M small high-power sealed DC electromagnetic relay is a 1 cubic inch balanced force relay with a compact structure and strong environmental adaptability. It can be widely used for circuit swapping in aerospace and other fields.

Product specifications: 6VDC, 12VDC, 28VDC, 48VDC
Load: 10A, 28VDC
Product size: 26mm × 26mm × 26mm
Product weight: �� 77g

[electromagnetic relay]JQX-65M type small high-power sealed DC electromagnetic relay

2026-4-22 14:53:28

The JQX-65M small high-power sealed DC electromagnetic relay adopts a balanced force structure, with a large number of contact groups and contact capacity, and can be widely used as a switching circuit in electronic devices and other circuits.

Product specification: 27VDC
Load: 10A, 27VDC
Product size: 44mm × 28mm × 40mm
Product weight: �� 250g

[electromagnetic relay]JQX-8MB Seismic resistant electromagnetic relay

2026-4-22 14:53:25

JQX-8MB small high-power (vibration resistant) sealed DC electromagnetic relay has a small volume, large load, good environmental adaptability, and easy installation. It is mainly used in electronic equipment in aerospace, aviation, and other fields

Product specifications: 12VDC, 27VDC
Load: 10A, 28VDC
Product size: 28mm × 13.2mm × 33mm
Product weight: �� 45g

[electromagnetic relay]JQX-40MT type small high-power sealed DC electromagnetic relay

2026-4-22 14:53:22

The JQX-40MT small high-power sealed DC electromagnetic relay is a 1 cubic inch balanced force relay with a compact structure and strong environmental adaptability. It can be widely used for circuit swapping in aerospace and other fields

Product specifications: 6VDC, 12VDC, 28VDC, 48VDC
Load: 3H: 5A, 380VAC; 1Z:0.5A,220VAC; 10A,28VDC
Product size: 26mm × 26mm × 26mm
Product weight: �� 78g

[electromagnetic relay]JQX-5M type small high-power sealed DC electromagnetic relay

2026-4-22 14:53:18

The JQX-5M small high-power sealed DC electromagnetic relay has a small volume and strong load capacity, and can be widely used for circuit swapping in aerospace and other fields

Product specifications: 6VDC, 12VDC, 18VDC, 24VDC, 27VDC
Load: 10A.27VDC; 5A,115VAC�� 3A,250VAC
Product size: 25mm × 13mm × 30mm
Product weight: �� 37g

[electromagnetic relay]JZC-102M type ultra small high-power sealed DC electromagnetic relay

2026-4-22 14:53:14

JZC-102M ultra small high-power sealed DC electromagnetic relay has a small volume, light weight, reliable operation, and strong environmental adaptability. Widely applicable to various fields such as aerospace, aviation electronics, etc

5VDC,6VDC,12VDC,24VDC,27(28)VDC
Load: 10A, 28VDC; 5A,115VAC
Product size: 20.5mm × 10.5mm × 11.5mm
Product weight: �� 11g

[��̵��]2092��

2026-2-17 19:06:30

2092��Ҫ��ת��źŵƣ��ƵĿ��

��Ʒ��: 12VDC
��: 2×21+4(W),4×21+8(W), 21+2(W)
��Ʒ�ߴ�: 27.5mm×26.6mm×31.5mm
��Ʒ��: ��24g

[ͨ�ü̵��]MY3J��Ų��ʽ�̵��

2026-2-17 16:59:22

MY3J��Ų��ʽ�̵��

��Ʒ�ͺţ�MY3J
�ο��ͺ�:
OMRON:MY2/3/4J
OEG:SRE
P&B:K10

MY3J��Ų��ʽ�̵��

[ͨ�ü̵��]LY3NJ��Ų��ʽ�̵��

2026-2-17 16:59:14

LY3NJ��Ų��ʽ�̵��

��Ʒ�ͺţ�JQX-13FL 3Z(LY3NJ)
�ο��ͺ�:
OMRON:LY3NJ
OEG:RET/SRET
P&B:K10
DZ-47

LY3NJ��Ų��ʽ�̵��

LY3NJ��Ų��ʽ�̵��

[ͨ�ü̵��]MY3NJ��Ų��ʽ�̵��

2026-2-17 16:59:06

MY3NJ��Ų��ʽ�̵��

��Ʒ�ͺţ�MY3NJ
�ο��ͺ�:
OMRON:MY3NJ
OEG:RET/SRET
P&B:K10

MY3NJ��Ų��ʽ�̵��

[ͨ�ü̵��]MY4NJ��Ų��ʽ�̵��

2026-2-17 16:58:07

MY4NJ��Ų��ʽ�̵��

�ͺţ�MY4NJ
�ο��ͺ�:
OMRON:MY4NJ
OEG:RET/SRET
P&B:K10

��

MY4NJ��Ų��ʽ�̵��

[ͨ�ü̵��]MY4J��Ų��ʽ�̵��

2026-2-17 16:57:59

MY4J��Ų��ʽ�̵��

��Ʒ�ͺţ�MY4J
�ο��ͺ�:
OMRON:MY2/3/4J
OEG:SRE
P&B:K10

MY4J��Ų��ʽ�̵��

[ͨ�ü̵��]MY2NJ��Ų��ʽ�̵��

2026-2-17 16:57:48

�ο��ͺ�:
OMRON:MY2NJ
OEG:RET/SRET
P&B:K10

��

MY2NJ��Ų��ʽ�̵��

[ͨ�ü̵��]LY2NJ��Ų��ʽ�̵��

2026-2-17 16:57:40

LY2NJ��Ų��ʽ�̵��

��Ʒ�ͺţ�LY2NJ
�ο��ͺ�:
OMRON:LY2NJ
OEG:RET/SRET
P&B:K10

��

LY2NJ��Ų��ʽ�̵��

[ѹ��̵��]DP-63(A)B��ѹ��̵��

2026-2-16 16:55:50

DP-63(A)B��ѹ��̵��Ǿ��и��빦�ܵ��Զ��Ԫ��㷺Ӧ��ң�ء�ң�⡢ͨѶ��Զ��ơ��һ�廯��豸�У��Ҫ�Ŀ��Ԫ��֮һ��
....
�̵��һ�㶼��ܷ�ӳһ��ѹ��ʡ��迹��Ƶ�ʡ��¶ȡ�ѹ��ٶȡ��ȣ��ĸ�Ӧ��벿�֣��ܶԱ��ص�·ʵ�֡�ͨ��ϡ��Ƶ�ִ�л��֣��ڼ̵��벿�ֺ��֮�䣬��ж��ϸ��룬��ܴ��Ͷ��ֽ��м��֣��

[�м�̵��]DZB-10Bϵ�б��м�̵��

2026-2-16 16:55:32

DZB-10Bϵ��м�̵��;

DZB-10Bϵ��м�̵��Ա��飬��ֱ��ļ̵籣��·�У��Ӵ��ߴ��㹤��Ŀɿ��ԡ�DZB-11B��12B��13BΪ��ѹ��ֵ��м�̵��DZB-14BΪ��ѹ��ֵ��м�̵��DZB-15BΪ��ѹ��ѹ��ֵ��м�̵��

2 DZB-10Bϵ�б��м�̵�� ԭ��ͽṹ

2.1 �̵��Ϊ��ʽ�̵��ѹ��ڹ��ʱ��պ�λ��˶��ϴ��պϣ��ϴ��Ͽ��ڼ̵��󣬽�ͨ��ĵ�·��ʧ�磬�̵��ͷţ�ֻ�е��ʧ��ڽӴ�Ƭ��ѹ��²Ż᷵�ص�ԭʼ״̬��ϴ��Ͽ��ϴ��պϡ�
2.2 �̵��ֽṹ��
2.2.1 ͹��ʽ��νṹ��ð��JK-1�Ϳ��壬��ͼ��ͼ��¼��̵��ڲ��߼�ͼ1��
2.2.2 Ƕ��ʽ��νṹ��ͺ��д�/Q��A11K��壬��ͼ��ͼ��¼��̵��ڲ��߼�ͼ2��
2.2.3 ��Ҫ��߷�ʽ��Ϊ��ǰ��߷�ʽ��Ӧ�Ӱ�ǰ��п򣬼��¼��ͼ2 Ƕ��ʽ�ڲ��ͼ

DZB-11B DZB-12B DZB-13B

DZB-14B DZB-15B
ͼ1 ͹��ʽ�ڲ��ͼ

DZB-11B/Q DZB-12B/Q DZB-13B/Q

DZB-14B/Q DZB-15B/Q
ͼ2 Ƕ��ʽ�ڲ��ͼ

3 �ͺŹ�񣺣��1��

��	�� ֵ		��ͺ��		��ʽ��(��)
��	��	��	��	��ѹ	��	ת��
DZB-11B	24��48��110�� 220V	0.5��1��2�� 4��8A	3	-	3	3
DZB-12B			3	-	6	-
DZB-13B			1	-	3	3
DZB-14B	0.25��0.5��1��2�� 2��4��8A	24��48��110�� 220	-	1	3	3
DZB-15B	0.25��0.5��1��2�� 2��4��8A	24��48��110�� 220	-	1	3	3
DZB-15B	24��48��110��220V	0.25��0.5��1��2��4��8A	1	-	3	3

4 DZB-10Bϵ��м�̵��
4.1 ��ֵ��ѹ��Ϊ���ѹֵ��30%-70%��Ϊ��ڶ��ѹֵ��80%��
4.2 ��ֵ��е��ļ̵��ֵ��ڶ��ֵ��80%��е�ѹ��ļ̵��ֵ�ѹ��ڶ��ֵ��70%��
4.3 ��ֵ��С�ڶֵ��3%��
4.4 ��ʱ�䣺��뼤��Ϊ�ֵʱ��0.045s��
4.5 ��ʱ�䣺�ٶϿ��󣬲��0.06s��
4.6 ��ģ��ڶֵʱ��±��еĶֵ��(��2)

�ͺ�	��ģ�W��
�ͺ�	��ѹ��	��	��ѹ��	��
DZB-11B��12B	7	-	-	4
DZB-13B	5.5	-	-	4
DZB-14B	-	7	7	-
DZB-15B	7	-	-	4
DZB-15B	-	7	7	-

4.7 ��Ͽ��ڵ�ѹ��250V��1A��ֱ��ии��ɵ�·��ʱ�䳣��Ϊ5H10-3S��У��Ͽ��Ϊ50W��ڵ�ѹ��250V��3A�Ľ��·��Ϊ0.4��У��Ͽ��Ϊ250VA��
4.8 ��㳤��ͨ��Ϊ5A��
4.9 ��ǿ�ȣ��̵��粿��ǵ��粿��֮�䣬�Լ��Ȧ��·�봥��·֮�䣬��ܽ��50HZ��ѹ2kV��ʱ1min��޻��
4.10 �̵��ԼΪ0.7Kg��

5 ��֪
��ʱӦָ��
5.1 �̵��ƺ��ͺţ�
5.2 ��뱣��Ķֵ��
5.3 ��

[ʱ��̵��]RD-2P�ϵ��ʱ��̵��

2026-2-16 16:55:26

RD-2P�ϵ��ʱ��̵��
RD-2P
��ʱ��

[�м�̵��]RXMA1��м�̵��

2026-2-16 16:55:18

RXMA1��м�̵��ڵ��ϵͳ��λ�·��ҵ�Զ��ƻ�·�У��Ϊ�м丨��ƻ�·֮�á�

2 �ṹ�ص�
2.1 ��ṩ��7��ϻ򶯶��Լ�ת��㣬�ṹ��ա�
2.2 ͨ��ֿ��ϵ�С�ײ��鴥�㶯��
2.3 ��Ȧ��н��ֱ��֡�

3 ��ԭ��
RXMAl�м�̵��Ϊ��ĺ�ʽ�ṹ��ɵ��ϵͳ��Ӵ�ϵͳ��ɡ��Ȧͨ��ʱ,ͨ��о��ų��Ƭ��Ƭ��Ƭ��ʹ��·ת��˫��Ӵ��нӴ��С�Ӵ��ɿ��ǿ��Ͽ��ŵ㡣��Ƭ��ʱ��С��Ըü̵��һ��ĳ��񶯣��еȵ��𲨵ĳ��̵��ǲ��Combiflex�ṹ��

4 RXMA1��м�̵��

4.1 ��ѹ��D.C.<70����ѹ��
4.2 ��ص�ѹ��D.C.>5����ѹ��
4.3 ��ʱ�䣺��ϴ��40ms��ϴ��30ms��
4.4 ��Ȧ��ģ�<2W
4.5 ��㳤��ͨ��5A��
��ͨ��ʱ��<200ms��ͨ��90A��
��ͨ��ʱ��Ϊ1sʱ��ͨ��50A��
4.6 ��Ͽ��A.C.��250VʱΪ5A(��>0.4)Ϊ250VA
D.C.��250VʱΪ2A(L/R=40ms)Ϊ45W��

��ѹ24Vʱ(DC)	4A/6A(��)/(˫��㴮��)
��ѹ48Vʱ(DC)	1.5A/4A(��)/(˫��㴮��)
��ѹ55Vʱ(DC)	1.0A/2.5A(��)/(˫��㴮��)
��ѹ110Vʱ(DC)	0.4A/1.0A(��)/(˫��㴮��)
��ѹ125Vʱ(DC)	0.3A/0.7A(��)/(˫��㴮��)
��ѹ220Vʱ(DC)	0.2A/0.4A(��)/(˫��㴮��)
��ѹ250Vʱ(DC)	0.15A/0.3A(��)/(˫��㴮��)

4.7 ��Ե��ѹ��50Hz��lmin��2kY��
4.8 ��ѹ��5kV��
4.9 �ܳ��5-15Hz�е��𼶵ĵ��𲨳��
4.10 ���ѹ��Ȧ��ֵ��(��2��3)

��ѹ�ȼ�DC(V)	6	12	24	36	48	55	110	220
��Ȧ��ֵ(��)	29	115	460	1.15k	2.02k	2.6k	9.68k	39.2k

��ѹ�ȼ�AC(V)	24	48	110	220
��Ȧ��ֵ(��)	115	460	2.02k	9.68k

4.11��

RK211 063

RK211 064

RK211 066

RK211 072

RK211 073

RK211 074

RK211 025

RK211 037

RK211 052

RK211 070

RK211 071

RK211 075

RK211 076

RK211 077

RK211 078

RK211 079

4.12 ͹��ʽģ��ṹ��γߴ��¼��и�ͼ��(2S6C)��
4.13 ͹��ʽģ��ṹ��װ�ߴ簴��¼��и�ͼ5(2S6C)�ɲ��밴��ͼ6(2S12C) ��Ų�2��ͼ7(4S6C)ֱ�Ų�2��ͼ8(4S12C)�ɲ��4��

5 ��֪
��ʱ��ע��ͺŴ��ż��ѹ�ȼ��ṩ��
��RXMAl RK211063-DC220V��

[ʱ��̵��]JSS48AԤ��ʽ��ʱ��̵��

2026-2-16 16:55:10

JSS48AԤ��ʽ��ʱ��̵��

[ʱ��̵��]ASY-2SM/3SM��ʱ��̵��

2026-2-16 16:54:59

ASY-2SM/3SM��ʱ��̵��

[��̵��]5210��̵��

2026-2-16 16:54:52

5210��̵��Ҫ��ת��źŵƣ��ƵĿ��

��Ʒ��: 12VDC
��: ��ƹ��(W) 46 ��ƹ��(W) 130 ��ָʾ��(W) 23
��Ʒ�ߴ�: 31.5mm×31.5mm×46mm
��Ʒ��: ��35g

[��̵��]2094��ſ��Ƽ̵��

2026-2-16 16:54:46

2094��ſ��Ƽ̵��ſ��Ƶ�Ԫ��15A��0.5S��ʱ��

��Ʒ��: 12VDC
��: 25A ,12VDC
��Ʒ�ߴ�: 39.3mm×32.6mm×98.5mm
��Ʒ��: ��50g

[ʱ��̵��]ST2P-E��ʱ��̵��

2026-2-16 16:54:39

ST2P-E��ʱ��̵��

[ʱ��̵��]SS-27��ʱ��̵��

2026-2-16 16:54:29

SS-27��ʱ��̵��

[ʱ��̵��]DHC1��ʱ��̵��

2026-2-16 16:54:14

��ʱ��Χ	0.1��-1ʱ ��9�ͺ�	��ʾ�ߴ�	LEDָʾ��ָʾ��Դ��ʱ��
��ʱ��ʽ	-	��׳ߴ�	33X33mm
�硡��ѹ	AC220V 50/60 Hz ��ѹ�ɶ��ƣ�85%-110%	��ģʽ	A4��E4 B4��
��γߴ�	36X36X81mm	��װ��ʽ	��壬��죬װ��
��ʱ��	��λ��0.5%FS+0.05��ظ��1%	��	-
��ʽ	1��ʱ��1��˲��	�ء��	��С�ͣ��ͼ۸�
��	3A AC250V��ԣ�	�ࡡ��	10
��	��105��	-	-
��е��	��107��

DHC1��ʱ��̵��

[ʱ��̵��]JSS-22��˫��ʱʱ��̵��

2026-2-16 16:54:01

JSS-22��˫��ʱʱ��̵��;��

JSS-22ʱ��̵��ڵ��ϵͳ�̵籣��ƻ�·��ҵ��Ƶ�ֱ��·��Ϊ��ʱ��Ԫ��֮�á��ʱ��Ҫ��ߣ��ʱ�伶��С�ĳ��ϡ�

�̵��ͺ��ƣ�

��ԭ��
��̵��Ϊ��̬��ʽʱ��̵��ý��CMOS��ɵ�·��ɣ��÷�Ƶ��ԭ��ʵ��ʱ��׼ʱ��ʯӢ��
�̵��һ��ʩ�Ӷ��ѹ��ʯӢ��񣬲��ʱ��壬��Ƶ��ɼ��ﵽ��ʱ��ֵʱ��ת��ִ�м̵��ڡ�
�̵��ԭ��ͼ��ͼ��

ʹ�÷��
4.1 ��ʱ��ɶ��λ8421�벦�̿��غ�һλDIP�ĵ�С��໥��϶��ɣ��ʽΪ: t=kT(s) (��kΪDIP�ĵ�С��ص��֣�TΪ��̿��ص��)��:kΪ0.01��TΪ357��ʱ��Ϊ0.01×357 = 3.57(s)��
4.2 ��ڱ��Ʒ��ʱ��ȷ��С��ʱ��ֵΪ20ms��ϣ��Ʊ��Ʒ��뼤��Ĵ��޶��ʹ��뼤��ж��ĳ��ϣ��û��ⶩ��Ҫ��

JSS-22��˫��ʱʱ��̵��Ҫ��
5.1 �ֱֵ��ѹ: 220V, 110V, 48V, 24V��
5.2 ��Χ��ʱ��Χ: 0.02s ��9990s��С��Ϊ: 0.01s��
5.3 ��ѹ�̵��Ķ��ѹΪ(60%��70%) �ֵ��С��60%�ֵ�ɿ��
5.4 ��ص�ѹ�̵��ķ��ص�ѹӦ��С��10%�ֵ��
5.5 ��ʱһ��ڻ�׼��: a) ��ʱ��Ϊ0.02s��0.99sʱ��һ��Բ��3ms�� b) ��ʱ��ڻ��1sʱ��һ��Բ��(0.1%��ֵ±3ms)��
5.6 ��ʱ��: �ڻ�׼��£�ƽ����(0.1%��ֵ±3ms)��
5.7 ��ʱ��: �̵��ʱ�䲻��15ms��
5.8 ��: �ڶ��ѹ�£��̵��Ĳ��10W��
5.9 ��: �ĸ��ɶ��ʱ��ת��㡣
5.10 ��
�ڵ�ѹ��250V�� 1A�� ʱ�䳣��Ϊ5ms±0.75msֱ��·�У��Ͽ��Ϊ30W��ڵ�ѹ��250V��5A��Ϊcos��=0.4±0.1�Ľ��·�У��Ͽ��Ϊ250VA��̵��ĵ��Ϊ10^4�Ρ�
5.11 ��
a) ʹ�õص㲻��б�ըΣ�յĽ��ʣ��Χ��в��и�ʴ��ƻ��Ե��弰��ʣ��ˮ��н��ص�ù��ڣ�
b) ʹ�õص㲻��н�ǿ��񶯺ͳ��
c) ʹ�õص�Ӧ��з��ꡢѩ��硢ɳ��ʩ��
d) ʹ�õص㲻��1.5mT��Ÿ�Ӧǿ�ȡ�
5.12 ��ǿ�ȼ̵��·��¶�ķǴ��ּ��֮�䣬Ӧ�ܳ��2kV(��Чֵ)��·�Դ��֮��Ӧ�ܳ��1kV(��Чֵ)��50Hz�Ľ��ѹ��ʱ1min��ʽ�� Ӧ�޾�Ե��
5.13 ��̵ܼ��Ӧ�ܳ��Ƶ��Ϊ1MHz˥��񵴲��һ��벨��ѹ��ֵ��Ϊ2.5kV��Ϊ1kV��ѹ��̵��Ӧ�󶯻�ܶ��

�̵��ͼ��

�̵��γߴ缰��׳ߴ磺
͹��ʽģ��ṹ�еĸ�ͼ1�͸�ͼ5��

��֪��
��ʱ��ע��̵��ͺŹ�񡢶��ѹ��

[�м�̵��]MA-306ϵ��м�̵��

2026-2-16 16:53:54

MA-306ϵ��м�̵��

[ʱ��̵��]CH48J��ʱ��̵��

2026-2-16 16:53:48

CH48J��ʱ��̵��

[��̵��]DL-20CEϵ�е��̵��

2026-2-16 16:53:35

DL-20CEϵ�е��̵��(��¼�Ƽ̵��)��ڷ��ѹ��·�Ĺ��ɺͶ�·��·�С�

2.��Ҫ��

�ͺ�	��ֵ/A	��Χ/A	���/A		��Ȧ��			��Ȧ��			��/VA	��ϵ��
			���/A		��/A	��ȶ��A		��/A	��ȶ��A
			��	��	��/A	��	Is	��/A	��	Is
DL-21CE DL-22CE DL-23CE DL-24CE	0.008	0.002-0.008	0.01	0.02	0.002-0.004	0.01	0.1	0.004-0.008	0.02	0.2	�ڶֵ��ߴ��ʱ��7	��С��0.8
	0.02	0.005-0.02	0.03	0.06	0.005-0.01	0.03	0.3	0.01-0.02	0.06	0.6
	0.06	0.015-0.06	0.1	0.2	0.015-0.1	0.1	1	0.03-0.06	0.2	2
	0.2	0.05-0.2	0.3	0.6	0.15-0.3	0.3	3	0.1-0.2	0.6	6
	0.6	0.15-0.6	1	2	0.05-0.1	1	10	0.3-0.6	2	20
	2	0.5-2	3	6	0.5-1	4	30	1-2	8	60	�ڵ��Ϊ5Aʱ��Ȧ��ʱ��3.5
	6	1.5-6	10	20	1.5-3	10	100	3-6	20	200
	10	2.5-10	10	20	2.5-5	10	100	5-10	20	200
	15	3.75-15	10	20	3.75-7.5	15	100	7.5-15	30	200
	20	5-20	10	20	5-10	15	100	10-20	30	200
	50	12.5-50	15	30	12.5-25	20	150	25-50	40	300
	100	25-100	15	30	25-50	20	150	50-100	40	300
	200	50-200	15	30	50-100	20	150	100-200	40	300		��С��0.7

����6��
��ʱ�䣺1.1��ʵ�⶯��ֵʱ��0.12s��2��ʵ�⶯��ֵʱ��0.04s��
��һ��ԣ��5��
��ڵ�ѹ��250V��5A��ʱ�䳣��Ϊ5±0.75ms��ֱ��ии��ɵ�·�У��Ʒ��ĶϿ��Ϊ50W��涨�ĸ��£��Ʒ�ܿɿ��5×104�Ρ��㳤��ͨ��Ϊ5A��
��ǿ�ȣ��Ʒ��ڡ��𣬶��¶�ķǴ��ֻ��֮�䣬�ܳ��2000V(��Чֵ)50Hz�Ľ��ѹ��ʱ1��޾�Ե��

3.�ڲ��

DL-20CEϵ�е��̵��

��
4.��μ��׳ߴ�

��DL-20CEϵ�е��̵��

[ͨ�ü̵��]HH63P(LY3)��ͨ�ü̵��

2026-2-16 16:53:28

HH63P(LY3)��ͨ�ü̵��Ҫ��

�ߴ�mm �� 31×27.2×35.4
��ֲ��ʽ��3Z
��10A 220VAC/10A 28VDC
��裺��50m��
��Ե��裺��100M��
��ǿ�ȣ�BOC 1000VAC/BCC 1500VAC

��Ҫ��

�͡��	JQX-13F-1Z(LY1)	JQX-13F-2Z(LY2)	HH63P(LY3)	HH64P(LY4)
��Ȧ���ѹ	DC 6 to 220V	DC 6 to 220V	DC 6 to 220V	DC 6 to 220V
��Ȧ���ѹ	AC 6 to 380V	AC 6 to 380V	AC 6 to 380V	AC 6 to 380V
��Ȧ���	DC��0.9W	DC��0.9W��1.5W	DC��1.4W	DC��1.5W
��Ȧ���	AC��1.2VA	AC��1.2 TO 2.5VA	AC��2.0VA	AC��2.5VA
��	105OPS	105OPS	105OPS	105OPS
��е��	107OPS	107OPS	107OPS	107OPS
ʹ�û��¶�	-25�桫55��	-25�桫55��	-25�桫55��	-25�桫55��
�ء��	��32g	��34g	��49g	��69g
��÷�ʽ	ӡˢ��·��ʽ ��ʽ��ʽ	ӡˢ��·��ʽ ��ʽ��ʽ	ӡˢ��·��ʽ ��ʽ��ʽ	ӡˢ��·��ʽ ��ʽ��ʽ

HH63P(LY3)��ͨ�ü̵��

[ʱ��̵��]BS-10ϵ��ʱ��̵��

2026-2-16 16:53:21

BS-10ϵ��ʱ��̵��

[�̵��]SYF08A-E�̵��

2026-2-16 16:53:07

SYF08A-E�̵��

[ʱ��̵��]ASK-2D��ʱ��̵��

2026-2-16 16:53:01

��ѹ��AC24V-AC240V DC24V-DC12V
��ʽ��1��ת��˲��1ת��
��ʱ��Χ
1D:1-900
2D:1-9900
3D:1-999000

ASK-2D��ʱ��̵��

[ʱ��̵��]H5CNʱ��̵��

2026-2-16 16:52:50

H5CNʱ��̵��

[�̵��]TP58X�̵��

2026-2-16 16:52:44

TP58X�̵��

[ѹ��̵��]PD-H-Lѹ��̵��

2026-2-16 16:52:36

PD-H-Lѹ��̵��ǵ�Һϵͳ�н�ѹ��ź�ת��ɵ��źŵ�ת��ʵ�ֵ�Һϵͳ�Զ��ƺͰ�ȫ��һ�㻷��͡��ˮ�ȹ��ʣ��Ǳ�ѹ��л��ɵ��Ӧ��еƹ��ʾ��似��ָ��Һѹѹ��̵��Ʒ��ֵ�JB/JQ2020-88��׼��
PD-H-Lѹ��̵��ѻ�ʵ��ר��ר��ţ�91-65222��ò�Ʒ�㷺Ӧ��ڻ�е��ұ�𡢿�ɽ��ʯ�͡��Զ��ƺͰ�ȫ��

�ͺ��

PD-H-Lѹ��̵��

��ѹ��Χ MPa	��Сͨ��ѹ��MPa	��ͨ��ѹ��MPa	��%	�ظ��%	��ؾ��%	��Ƶ�� /��
0-1.0	0.065;0.005	1.0;0.97	��3	��1.2	<1	30
1-32	0.7;0	32;31	��2	��0.5	<1	30

��¶ȣ�-25��~70��
��ճ�ȣ�2.8~380 cst
��ȼ��IP54
��ѹ��24V-��110V-��220V~
��30��
��ƣ�M14×1.5
�Ǳ�ִ�б�׼��JB/T6802-1993

��γߴ磺

PD-H-Lѹ��̵��ʾ��ͼ��

ʹ��붩��֪��

��ѹ��
PD-H-L1�͵��ʱӦ��ʱ��ɿ��ĸ��˳ʱ�뷽��ѹ�ݸ˺��ѹ��ѹ��ʾ��ֵ��ʱ��ת��ѹ�ݸˣ�ʹ΢��ض��ָʾ��῿��ĸ��ظ�ϸ��ź��ȷ��ס��ĸ��

PD-H-L2�͵�ѹ��ͬ�ϣ��Ƶ�Ϊ��޵�ѹ�ݸˣ�Ӧ�ȵ��ޣ��ٵ��ޡ�
��Ӧ�и�ʴ��塣
��˵��ơ��ͺš��ѹ��Χ��Դ��

[ʱ��̵��]SS-72/2�;�̬ʱ��̵��

2026-2-16 16:52:30

SS-72/2�;�̬ʱ��̵��ڵ��ϵͳ�̵��Զ��װ��У��Ϊ��ʱ��Ԫ��

DC220V��110V ,0.1-9.9S

SS-72/2�;�̬ʱ��̵��

[ʱ��̵��]SS-18II�͹��·ʱ��̵��

2026-2-16 16:52:11

S-18��͹��·ʱ��̵��(��¼�Ƽ̵��)��ڸ��ֽ��ֱ��Զ��Ƶ�·��Ϊʱ��Ԫ��ʱ��ͨ��ʱ�ֶϻ��ͨ�ϱ��ص�·��̵��ֵ�·��С�ʹ��ͨ�ü̵��ɡ��о��ȸߡ��ȶ��Ժã��ص㡣��̵��ú�ʽ�ṹ��ڰ�װ��ʽ��ѡ��˰�װ��氲װ��ʽ��ǿ��ṹ��ۡ��װ��ŵ㡣

2.�ͺ�

3.��Ҫ��
��Դ��ѹ��24V��36V��48V��110V��220V��380V��ֱ��12V��24V��48V��110V��220V��
��ʱ����1��
��㣺��鳣��ת��
��ڵ�ѹ��250V��5A��ʱ�䳣��Ϊ5±0.75ms��ֱ��ии��ɵ�·�У��Ʒ��ĶϿ��Ϊ50W��涨�ĸ��£��Ʒ�ܿɿ��5×104�Ρ��㳤��ͨ��Ϊ5A��
��ǿ�ȣ��Ʒ��ڡ��𣬶��¶�ķǴ��ֻ��֮�䣬�ܳ��2000V(��Чֵ)50Hz�Ľ��ѹ��ʱ1��޾�Ե��

4.�ڲ��߼��׳ߴ�

SS-18II�͹��·ʱ��̵��

[�м�̵��]JZD3ϵ��м�̵��

2026-2-16 16:52:03

JZD3(3TH20) ϵ��м�̵��ڿ��ƽӴ��̵��򴫵ݿ��źš�
�� 8 �Ը��ͷ��Ȧ��Ƶ�Դ��ǽ�� AC ��ֱ�� DC ��
��Ʒ�� GB14048.5,IEC60947-5-1 ��׼��Ҫ��

2. �ṹ�ص㣺
��С��
�� DC24V ��Ȧ�Ĺ��ġ� 2.4W �� PLC ��ֱ�ӿ��ơ�
��ͬ��Ʒ��С�ģ��ʺ��ڰ�װ�ռ��ܵ��Ƶ��豸�С�

JZD3ϵ��м�̵��

[ʱ��̵��]CCS21Aϵ�е��ʽʱ��̵�� CCS21A-1 CCS21A-2 CCS21A-3 CCS21A-4

2026-2-16 16:51:56

CCS21Aϵ�е��ʽʱ��̵��

[�м�̵��]ZJ-3��м�̵��

2026-2-16 16:51:47

ZJ-3��м�̵��ڵ��ϵͳ��λ�·�̵籣��Զ��У��Ϊ��ӱ��Ϳ��ƻ�·�Ĵ��ʹ��֮�ã�Ҳ��ִ��Ԫ��

110V 220V

ZJ-3��м�̵��

[��̬�̵��]SSRR-10DA��̬�̵��

2026-2-16 16:51:32

SSRR-10DA��̬�̵��

[ͨ�ü̵��]JKA-56ϵ��С�ͼ̵��

2026-2-16 16:51:25

JKA-56ϵ��С�ͼ̵��

[ʱ��̵��]MS-21��ʱ��̵��

2026-2-16 16:51:17

1.��
MS-21��ʱ��̵��Ŷ��·�У��Ϊ��ʱԪ��

2.�ṹ�ص�
�ü̵��Ϊ�綯��ʽ��ԭ��̵��Ļ��ͬ��綯��綯��ͼ̵��ļ��ٻ��ʱ��̵��̶��װ�ڴ�ֱ��ϣ��̵��ǰ��߻��ߣ��ʱ��ָ��

3.MS-21��ʱ��̵��Ҫ��

4.��ӽ��ͼ

MS-21��ʱ��̵��

[�м�̵��]JZ-31B,JZ-32Bϵ��м�̵��

2026-2-16 16:51:10

��
JZ-30Bϵ�о�̬�̵��Ϊ��̵��ڵ��ϵͳ�̵��У��ǰһ��̵��ʹ��

JZ-31B,JZ-32Bϵ��м�̵��

[�м�̵��]JY-16A��м�̵��

2026-2-16 16:51:02

JY-16A��м�̵��Ҫ��ֱ��ѹ��ĵ��Զ��װ��У��ӱ��ص�·��

DC12V 24V 48V 110V.220V

JY-16A��м�̵��

[��ѹ�̵��]AVMR-D��ѹ�̵��

2026-2-16 16:50:55

AVMR-D��ѹ�̵��
��ѹ��ǲ��㣬�ڲ��̵��ص�ԭʼλ�ã��жϵ�Դ
��ʱ��:0~15��ɵ�
12VDC�趨��Χ:��ѹ10~14V,��ѹ13~17V
24VDC�趨��Χ:��ѹ20~28V,��ѹ26~34V
36VDC�趨��Χ:��ѹ30~42V,��ѹ39~51V
48VDC�趨��Χ:��ѹ40~56V,��ѹ52~68V

��		AVMR-D
���ѹ		DC(V):12,24,36,48
��ӵ�		2C 5A
ָʾ�ƶ��		��ָֻʾ��
�� ��	�� е	5×10^6 times
	��	10^5 times
�趨��		±10% max
��ʱ��		0.1 sec max
��Ĺ��		2VA
ʹ�û��¶�		-10��~+55��
ʹ�û��ʪ��		45%~85%RH
��		Approx.110g

AVMR-D��ѹ�̵��ͼ��ʱ��ͼ

AVMR-D��ѹ�̵��۳ߴ�ͼ

AVMR-D��ѹ�̵��

[ʱ��̵��]JS11ϵ��ʽʱ��̵��

2026-2-16 16:50:42

JS11��ʱ��̵��»��Ʒ(��ͬ)��ô��񼯳ɵ�·��״ָ̬ʾ��ֿ��Ԥ�á��ȸߡ��ʱ��Χ��

[ʱ��̵��]JSM8��ʱ��̵��

2026-2-16 16:50:31

JSM8��ʱ��̵��

[ʱ��̵��]ASY-2D/3D��ʱ��̵��

2026-2-16 16:50:25

ASY-2D/3D��ʱ��̵��

[ʱ��̵��]ST4P��ʱ��̵��

2026-2-16 16:50:09

ST4P��ʱ��̵��

��ѹ��12��24��48��100��110VDC
��(��仯��20%)
��24��48��100/110V/120
�� 200/220/240VAC 50-60Hz
��ʽ��ST4P-:��ʱ2ת��ST4P-8:��ʱ2ת��
��H3BA-8H:��ʱ1ת��˲ʱ1ת��
��ʽ��ST4P��ʱ��/�Զ��λ/�ⲿ��λ
��ST4P-8��ʱ��/�Զ��λ/�ⲿ��λ
��H3BA-8��ʱ��/�Զ��λ/�ⲿ��λ
��ʱ��Χ��0.05-0.5��0.5-5H��0.1-1 1-10H
��0.5-5 5-50H�� 1-10 10-100H

ST4P��ʱ��̵��

[�м�̵��]DZS-100ϵ��м�̵��

2026-2-16 16:50:00

1 DZS-100ϵ��м�̵��;

DZS-100ϵ��м�̵��Ϊ��̵��ֱ��ı��·�У��̵��Ĵ��򴥵��DZS-115��DZS-117��Ϊ��ʱ��̵��DZS-127��DZS-136��Ϊ��ʱ��ѹ��͵��̵ּ��DZS-145��Ϊ��ʱ��ؼ̵��

2 DZS-100ϵ��м�̵��ṹ��
DZS-100ϵ�м̵��Ϊ��ʽ��ż̵��
�̵��Ȧװ��ɽ�ε��Բ��о�ϣ�DZS-115��117��ֻ��һ��(��ѹ��)��DZS-127��136��һ��(��ѹ��)��Ͷ��(��)��Ȧ��Բ��о��ͬʱװ��Ȧ��ɴ˻��˼̵��ʱ��ʱ��ء�
�̵��Ķ��Ӵ�ϵͳ�ֱ�̶��ڵ��ʹ��ϣ��֧��ɵ��ã�ʹ�̵��غʹ��ڴ�λ�á�
�̵��װ�ڴ�ֱ��ϣ��԰�ǰ��ߣ�Ҳ��԰��ߣ��ڲ��ͼ1��ʾ��

ͼ1 DZS-100ϵ�м̵��ڲ��ͼ
��Ϊ DZS-115 DZS-117
DZS-127 DZS-136 DZS-145

3 ��
3.1 �̵��ֵ�ʹ��ʽ�ɱ�1��

��	�ֵ		��
��	��ѹ��V��	��A��	��	��
DZS��115 145	220��110��48��24		2	2
DZS��117	220��110��48��24		4
DZS��127	220��110	1��2��4	4
DZS��127	48��24	2��4��6	4
DZS��136	220��110	1��2��4	3
DZS��136	48��24	2��4��6	3

3.2 ��ѹ��70����ѹ��
3.3 ��ʱ�䣺��С��O.06s(DZS-145�ͳ��)��
3.4 ��ֵ��80����(��ָDZS-127��136)
3.5 ��ʱ�䣺
DZS-145�ͣ��ڶ��ѹ�£�ͨ��ʱ�䲻С��0.5s��Ȼ��жϵ�Դ��ʱ�䲻С��0.8s��
3.6 ��ܣ��¶�Ϊ+40��ʱ��
3.6.1 ��ѹ��鳤��110����ѹ��65K��
3.6.2 ��ͨ��3����ʱ5s��
3.7 ��ģ��ڶֵ�£�
3.7.1 DZS-115��117�ͣ��3.5W��
3.7.2 DZS-127��136�ͣ��ѹ��鲻��5.5W��鲻��2.5W��
3.7.3 DZS-145�ͣ��6.5W��
3.8 ��ϱ�2�涨��

��	��ѹ��V��		��Ͽ��	��ڽ�ͨ��
��	DC	AC	��A��	(A)
��	220		1	5
��	110		5	5
�� (T��5×10-3s)	220		0.4	5
�� (T��5×10-3s)	110		4	5
cos��=0.4		220	5	5
cos��=0.4		110	10	5

3.9 ��ǿ�ȣ��̵��·��¶�Ǵ��֣��Լ��ڵ��ϵ�ĸ��·֮��ܽ��50Hz��ѹ2kV��ʱ1min��޻��
3.1O �̵��1.1kg��
3.11 DZS-100ϵ�м̵��γߴ缰��׳ߴ��ͼ2��ͼ3��

ͼ2 ��γߴ�ͼ

ͼ3 ��׳ߴ�ͼ

3.12 ��Ȧ��ֵ��3��

DZS��	115 117	��ѹ��	ֱ��ѹ	220V	110V	48V	24V
	115 117	��ѹ��	��Ȧ��	16300��	4080��	940��	208��
	127 136	��ѹ��	ֱ��ѹ	220V	110V	48V	24V
	127 136	��ѹ��	��Ȧ��	10k��	2.5k��	480��	120��
	145	��ѹ��	ֱ��ѹ	220V	110V	48V	24V
	145	��ѹ��	��Ȧ��	10.2k��	2.2k��	450��	95��

4 ��֪
��ʱӦע��
4.1 �̵��ơ��ͺš�
4.2 ���ѹ����
4.3 ��߷�ʽ��ǰ��(��ע��߰��߹��)

[�̵��]TYPE 90.22�ͼ̵��

2026-2-16 16:49:54

TYPE 90.22�ͼ̵��

[ʱ��̵��]DHC2/DHC2-H��ʱ��̵��

2026-2-16 16:49:47

DHC2/DHC2-H��ʱ��̵��

��ʱ��Χ	0.1��-10ʱ ��3�ͺ�	��ʾ�ߴ�	LEDָʾ��ָʾ��Դ��ʱ��
��ʱ��ʽ	-	��׳ߴ�	45X45mm
�硡��ѹ	AC220V 50/60 Hz ��ѹ�ɶ��ƣ�85%-110%	��ģʽ	A4
��γߴ�	48X48X94mm	��װ��ʽ	��壬��죬װ��
��ʱ��	��λ��0.5%FS+0.05��ظ��1%	��	-
��ʽ	2��ʱ \| 1��ʱ1˲��	�ء��	��ʱ�Σ��ͼ۸�
��	3A AC250V ��ԣ�	�ࡡ��	11
��	��105��	-	-
��е��	��107��	-

DHC2/DHC2-H��ʱ��̵��

[ʱ��̵��]CDJS2R��ʱ��̵��

2026-2-16 16:49:40

CDJS2R��ʱ��̵��÷�Χ

�õ��ʽʱ��̵��ڽ��50Hz(60Hz)����ѹ380V��»�ֱ��24V��µĿ��Ƶ�·��ʱԪ��Ԥ��ʱ��ͨ��ֶϵ�·��

CDJS2R��ʱ��̵��ͺż��京��

��װ��
1��ʹ�û��װ�ص�ĺ��β��2000�ף��Χ��¶Ȳ��+40��C��24h�ڵ�ƽ��¶�ֵ��+35��C��Χ��¶ȵ��Ϊ-5��C; ��¶�Ϊ+40��Cʱ��ʪ�Ȳ��50%; �ڽϵ͵��¶�+20��Cʱ��ʪ�Ȳ��90%��¶ȱ仯ż��¶Ӧ��ȡ��Ĵ�ʩ�� 2��Դ��ѹ�仯��ΧΪ85%-110%���ѹ; 3��𶯺ͱ�ը�Ľ��У��ҽ��Ը�ʴ��ƻ��Ե��볾��ѩ��ʴ��ĵط�ʹ��; 4��ֱ��ˮƽ��װ��

��Ҫ��

��ͼ

��μ��װ�ߴ�

[ʱ��̵��]H3M��ʱ��̵��

2026-2-16 16:49:33

��ѹ��AC 110V-240V 50Hz
��DC 12V-DC 24V
��ʽ��ʱ2ת��
��ʽ��ͨ��ʱ
��ʱ��Χ��1S-10S
��3S-10M
��10S-10M
��30S-30M
��60S-60M

H3M��ʱ��̵��

[��̵��]JL-11C�;�̬��̵��

2026-2-16 16:49:15

JL-11C�;�̬��̵��ڵ��ѹ��ߵĹ��ɺͶ�·��·�У��Ϊ��Ԫ��

2-19.9A
220V.110V.48V

JL-11C�;�̬��̵��

[��̬�̵��]SSR3-DAϵ�й�̬�̵��

2026-2-16 16:49:08

SSR3-DAϵ�й�̬�̵��װָʾ��(LED)ָʾ�䶯��߾�Ե�迹��50M��(500VDC)��ѹ��2.5KV��㴥��ʽ��Ч��Ƶ/��Ÿ��
��װ��·��˲��ͻ��

��	SSR3-10DA	SSR3-15DA	SSR3-25DA	SSR3-40DA	SSR3-50DA	SSR3-80DA
��	10A	15A	25A	40A	50A	80A
��
��ѹ	5~32VDC
©��	20mA/12VDC max
��Ʒ�ʽ	Zero Cross Trigger
��
��ѹ	24~280VDC
��ON��ѹ�½�	1.6V
©��	<3.0mA
��Ӧʱ��	ON<10ms,OFF<10ms
һ��
��Ե��	Min.50M�� 500VDC��
��ѹǿ��	2500VAC 50/60 Hz for 1 min
ʹ�û��¶�	-20��~+80��
ʹ�û��ʪ��	45~85%RH
��	Appr.320g

SSR3-DAϵ�й�̬�̵��ͼ

SSR3-DAϵ�й�̬�̵��

[��̵��]2087A��ȫ��Ҽ̵��(2087A)

2026-2-16 16:49:02

2087A��ȫ��Ҽ̵��(2087A)��Ҫ��ơ��ҡ��ȵȿ��

��Ʒ��: 12VCD
��: 20A,14VDC
��Ʒ�ߴ�: 24.3mm×18.2mm×28.2mm
��Ʒ��: ��30g

[ʱ��̵��]DSJϵ��ʱ��̵��

2026-2-16 16:48:54

1.��

DSJϵ��ʱ��̵��һ�ֵ�ѹ��ʱ��Ǳ��㷺��Ĺ�ҵ�е��ֽӡȾ��ҽ��е��ҵ�еĸ��豸�еĹ��ʱ��л��ұ��е��ҵ�е�ת¯��ȴ��ʱ�أ��ҵ��¯��ҵ�е��Զ��ˮ��ʳƷ��е��ҵ�е��¶�ʱ��ƣ�ӡˢ��е��ҵ��ư壻ʯ��ҵ�е��򻯵��Զ��ϻ��Ƶ�·�С��ʹ�Զ��ϵͳ��ʱ��Ҫ��׼ȷ�ؽ��ʱ�𶯲��ͣ��ͬ��ͬ��ʱ��̵��Ͽ��ʱ��ܴﵽ��ת��ظ�ѭ��Ŀ�ġ�

2.�ͺŲ��

��	��ʱ��Χ	��ʱ��	��С�̶�ʱ��ֵ
0-6��	6��	0.2��	0.05��
0-12��	12��	0.2��	0.1��
0-30��	30��	0.2-0.5��	0.5��
0-60��	60��	0.5-1��	0.5��
0-120��	120��	1-2��	1��
0-240��	240��	2-4��	2��
0-480��	480��	2-4��	4��
0-15��	15��	5-10��	6��
0-30��	30��	5-10��	15��
0-60��	60��	5-10��	30��
0-120��	120��	10-30��	1��
0-240��	240��	20-60��	2��
0-6Сʱ	6Сʱ	1-5��	3��
0-12Сʱ	12Сʱ	2-6��	6��
0-24Сʱ	24Сʱ	5-10��	15��
0-48Сʱ	48Сʱ	5-10��	30��
0-96Сʱ	96Сʱ	5-15��	1Сʱ

DSJϵ��ʱ��̵��

[�м�̵��]DZB-500ϵ��м�̵��

2026-2-16 16:48:46

1 DZB-500ϵ��м�̵��;

��ϵ��м�̵��ֱ��ѹ��ֱ��֣��ڱ��Զ��Ƶ�·�С�

2 DZB-500ϵ��м�̵��ͺź��

3 DZB-500ϵ��м�̵��

DZB-500ϵ�м̵��Ĵ��㡢��ͻ��±��

�ͺ�

��ʽ

��

���ѹ��V��

���A��

512

DZB��513

514

515

��ת��

��ϡ��ת��

��ת��

��

һ��ѹ��

һ��

��Ϊ��

�ͱ��

24��48��

110��220

0.5��1��

2��4

532

DZB��533

534

535

��ת��

��ϡ��ת��

��ת��

��

һ��ѹ��

��

24��48��

110��220

0.5��1��

2��4

3.1 �ڻ��¶�Ϊ+20��ʱ��̵��ɿ��ѹ��70����ѹ��ֵ��80����
3.2 ��鴦��޵�״̬�£��̵��ʱ��ͷ��ʱ��0.05s��
3.3 �̵��Ͽ��
3.3.1 ��ֱ��·���ѹ��250V�͵��1A��Ҿ��е��(ʱ�䳣��5×10-3S)ʱ��ĶϿ��Ϊ50W��
3.3.2 �ڽ��·���ѹ��250V�͵��2.5Aʱ��Ͽ��Ϊ500VA��
3.3.3 ��ڱպ�λ��ʱ��ͨ��5A��
3.4 ��¶�Ϊ-40��ʱ��ѹ��鳤��110����ѹ��65K��3����ʱ3s��
3.5 �̵��粿��о֮��ܽ��50Hz��2kV��ʱlmin��ѹ��޻��
3.6 �̵��105�ζ��
3.7 DZB-500ϵ�м̵��μ��װ��׳ߴ��ͼ1

ͼ1 D2B-500ϵ�м̵��μ��װ��׳ߴ�ͼ

3.8 ��Ȧ��ֵ��±�

512 513 514 515 DZB- 532 533 534 535	��ѹ��	ֱ��ѹ	220V	110V	48V	24V
	��ѹ��	��Ȧ��	18k��	4.6k��	750��	188��
	��ѹ��	ֱ��ѹ	220V	110V	48V	24V
	��ѹ��	��Ȧ��	35k��	3.4k��	800��	200��

3.9 220V��ѹ��Ȧ�߾��0.09��Ϊ��ʱ��ͨ�磬С��0.09��Ϊ��ͨ�硣

4 ��֪
4.1 �̵��ơ��ͺż��
4.2 ���ѹ�͵��

[�м�̵��]DZ-700ϵ��м�̵��

2026-2-16 16:48:36

1.��

DZ-700ϵ��м�̵��Ϊһ�ָ��̵��ֱ�Ӳ��ĸ��ֱ��Զ��װ��У��Ӵ��
2.�ṹ
��
DZ-700ϵ��м�̵��DM-1�͵��̵��Ļ��ӵ��Ƕ��ɡ��ṹ��JK-4��͹��ʽ��ߣ��JKF-4Q��͹��ʽ��ߣ��JK-6/1��Ƕ��ʽ��ߣ��׼��ָ��

3.��Ҫ��
��DZ-700��м�̵��Ҫ��ݼ��

ע��ʽ��4λ��ɣ��һλ��ʾ��ϴ��ڶ�λ��ʾ��ϴ��λ��ʾת��λ��ʾ��ת��
4.�ڲ��ͼ

DZ-700ϵ��м�̵��ڲ��߼�ͼ��

��

DZ-700ϵ��м�̵��

[�м�̵��]AL1��м�̵��

2026-2-16 16:48:30

AL1��м�̵��

��ü̵��
1��ӵ�
��ѡ��ڲ�LEDָʾ��

AL1��м�̵��

[��̬�̵��]JGJ21��ʽ��ཻ��̬�̵��

2026-2-16 16:48:22

��		JGJ21(ԭJGX21)
�� �� �� ��	��Ƶ�ѹ	3��32 VDC(��ֱ��)
	��Ƶ��	��25 mA
	��	��6 mA
	�رյ�ѹ	��1.5VDC
	ͨ��ʱ��	��10mS
�� �� �� ��	��ص�ѹ	24��240VAC×2 24��440VA×2 24��660VAC×2
	��ص��	10��40A 60��180A 200��350A
	̬ͨѹ��	��1.5V ��1.8V
	��̬��ѹ	��400V �� 800V �� 1500V

�� �� �� ��	��ѹ	��1800V
	��Ե��ѹ	��2000V
	��Ե��	��100M��
	��¶�	��25∼75 ��
	��ԴƵ��	50/60HZ
	ɢ��	��20A��ɢ��,��30A�ټӷ��ǿ��
	��ص��ȫϵ��	��Ը��ȡ2-3��,��Ը��ȡ3-4��
	��γߴ�(��)	58×45×21 mm3(J-1) 104×73×33 mm3��J-3�� 86×68×28 mm3 (J-6)

JGJ21��ʽ��ཻ��̬�̵��γߴ�.��װ��ͼ:(��λ:mm)

JGJ21��ʽ��ཻ��̬�̵��

[��̬�̵��]JGX-3/4840Z��̬�̵��

2026-2-16 16:48:02

JGX-3/4840Z��̬�̵��

[�м�̵��]DZS-500ϵ��м�̵��

2026-2-16 16:47:54

DZS-500ϵ��м�̵��Ӧ��ֱ��ѹ��220��ı��Զ��Ƶ�·�С��乤��Ҫ��ڼ̵��ͷ�ʱ��ò��ʱ��DZS-510��Ϊ��ʱ��DZS-530Ϊ�ͷ��ʱ��

2 DZS-500ϵ��м�̵��
2.1 �̵��ͺż��

��	��Ȧ��ѹ��V��	��		ʱ �䣨s��
��	��Ȧ��ѹ��V��	��	ת ��	ʱ �䣨s��
DZS-512	24 48 110 220	��	2	��ʱ�䲻С��0.06
DZS-513		2	2
DZS-514		��	4
DZS-515		6	��
DZS-532	24 48 110 220	��	2	�ͷ�ʱ�䲻С��0.12
DZS-533		2	2
DZS-534		��	4
DZS-535		6	��

2.2 �̵��¶�-25��-+40�档
2.3 ��Χ��¶�Ϊ+20��ʱ��̵��ѹ��70����ѹ��ڶ��ѹ��ж��Ȧ��·��̵��Ӧ�ɿ��ط��ص�ԭ��λ�á�
2.4 ��Χ��¶�Ϊ+20��ʱ��DZS-510�̵��Ȧ��ͻȻ����ѹ��£��̵��Ķ��ʱ��Ӧ��С��O.06s��
2.5 ��Χ��¶�Ϊ+20��ʱ��ڶ��ѹ�£�DZS-530�̵��Ȧͨ��ʱ�䲻С��0.5s��£��ж��Ȧ��·��䷵��ʱ��Ӧ��С��0.12s��
2.6 �̵��ĶϿ��ͽ�ͨ��
2.6.1 ��ֱ��·�У��ѹ��250V��1A��Ҿ��е��(ʱ�䳣��5×10-3s)ʱ��ĶϿ��Ϊ50W��
2.6.2 �ڽ��·���ѹ��250V�͵��2.5A��С��0.8ʱ��ĶϿ��Ϊ500VA��
2.6.3 �̵��Ĵ��ڱպ�λ��ʱ��Ӧ�ܳ��5A��65K��
2.7 ��Χ��¶�Ϊ+40�棬�̵��Ȧ�ܳ��110����ѹ��Ȧ��65K��
2.8 �̵��Ȧ��е��粿�ֶ��о֮��Ľ��ǿ��Ӧ��50Hz��2kV��ѹ��ʱ1min�޻��
2.9 �ڶ��ѹ��Ȧ��Ĳ��5W��
2.10 �̵��ϵĸ��Ϊ��2.6��涨��ͨ�ͷֶϹ��£��1000�ν�ͨ��1000�ζϿ��󣬼̵��Ӧ��2.3��2.4��2.5��2.6��涨��

2.11 ��Ȧ��±�

510

DZS-

530

��ѹ��

ֱ��ѹ

220V

110V

48V

��Ȧ��

14.5k��

3.6k��

750��

2.12 220V��ѹ��Ȧ�߾��0.09��Ϊ��ͨ�磬С��0.09��Ϊ��ͨ�硣
2.13 DZS-500ϵ�м̵��μ��װ��׳ߴ�ͬDZ-500�͡�

ͼ1 DZS-500��μ��װ�ߴ�ͼ

3 ��֪
3.1 �̵��ơ��ͺš��
3.2 ���ѹ�͵��
3.3 ��

[��ѹ�̵��]AVM-NB��ѹ�̵��

2026-2-16 16:47:47

AVM-NB��ѹ�̵��

��λ˳�򲻶�(��)��ѹ��߻��ѹ��ʱ�Զ��ѱ��
�趨ֵ��ԴӶ��ѹ��±5%��±29%
��ѹ��ǲ��㣬�ڲ��̵��ص�ԭʼλ�ã��жϵ�Դ
��ӳ�ʱ�䷶Χ: 1.0~10.0��ɵ�
��ʱ�䷶Χ: 1.0~10.0��ɵ�
��ʾʵ�ʵ�ѹֵ

��		AVM-NB��YB	AVM-N1B��Y1B
		��	��
���ѹ		AC(V):220,240,380,415,440,480,50/60Hz
��ӵ�		1C 5A
ָʾ�ƶ��		��ָʾ
�� ��	�� е	5×10^6 times
	��	10^5 times
�趨��		±5% max
��ʱ��		0.1 sec max
��Ĺ��		3VA
ʹ�û��¶�		-10��~+55��
ʹ�û��ʪ��		45%~85%RH
��		Approx.210g

AVM-NB��ѹ�̵��ͼ��ʱ��ͼ

AVM-NB��ѹ�̵��۳ߴ�ͼ

[ʱ��̵��]BS-15.16.17��ʱ��̵��

2026-2-16 16:47:13

BS-15��16��17��ʱ��̵��(��¼�Ƽ̵��)��Ϊ��ʱ��Ԫ��ڼ̵籣��Զ��ϵͳ�У�ʹ��Ԫ��Ԥ��ʱʱ�䶯��
BS-15Ϊ��ʱ��DS-16Ϊ��ʱ��е�ժ�Ա��ִ��㣻BS-17Ϊ˫��ʱ��һ��֣�Ҳ��ޱ��顣
��
2.BS-15.16.17��ʱ��̵��Ҫ��
���ѹ��DC 220V��110V��48V��
���ֵ��lA��
��ʱ��Χ��BS-17 0.1-3.0s��0.1-5.0s��0��5-10s��2-20s(1-4��ʱ��)��BS-15��16 0.1-3.0s��1.0-4.5s��13.1-5s��1.8-20s��3-30s(1-5��ʱ��)
��ʱһ����ƽ��ֵ��1��5��t��ģ��9W��
��ѹ��250V,��5A��ʱ�䳣��Ϊ5+0.75ms��ֱ��ии��ɵ�·�У��Ʒ��ĶϿ��Ϊ50W��涨�ĸ��£��Ʒ����5 x 104�Ρ��ɽ��㳤��ͨ��Ϊ5A��
��ǿ�ȣ��Ʒ��һ�𣬶��¶�ķǴ��ʷֻ��֮�䣬��2000V(��Чֵ)50Hz�Ľ��ѹ��ʱ1��޾�Ե��
�ͺ�ĩ�˴��C��K�ڴ��ͼ̵��⸽��(��)

��
3.�ڲ��

BS-15.16.17��ʱ��̵��

[�ȼ̵��]M-Z1Cϵ��ȹ��ؼ̵��

2026-2-16 16:47:06

�ͺż��	�ͺ�	��Χ	��ͳߴ缰��װ�ߴ�
M-Z1C	M-Z1C-25 M-Z1C-32 M-Z1C-40 M-Z1C-50 M-Z1C-65	17-25A 23~32A 30~40A 37-65A 48-65A

M-Z1Cϵ��ȹ��ؼ̵��

[��̵��]2093��ο��Ƽ̵��

2026-2-16 16:46:59

2093��ο��Ƽ̵��Ҫ��ε��Ŀ��

��Ʒ��: 12VDC
��: 5A,13.5VDC
��Ʒ�ߴ�: 39.3mm×32.6mm×74.5mm
��Ʒ��: ��40g

[ʱ��̵��]JSD2(7PR4140��4040)ϵ��ʱ��̵��

2026-2-16 16:46:39

JSD2(7PR4140��4040)ϵ��ʱ��̵��

[��̵��]2096��ʱ��̵��

2026-2-16 16:46:32

2096��ʱ��̵��Ҫ��Կ�ף��ȵ�·��12S��ʱ��

��Ʒ��: 12VDC
��: ��3.4W
��Ʒ�ߴ�: 30.7mm×28.6mm×75mm
��Ʒ��: ��30g

[ʱ��̵��]AH5B��ʽ��ʱʱ��̵��

2026-2-16 16:46:24

AH5B��ʽ��ʱʱ��̵��װCMOS IC�ʾ߸��ȼ��ȶ�� -��ʹ��P2CF-08��¶��Ͱ�װ��Y-50 + P3G-08��Ͱ�װ

AH5B��ʽ��ʱʱ��̵��

[��ѹ�̵��]DJ-100A/Qϵ�е�ѹ�̵��

2026-2-16 16:46:15

1 ��;
DJ-100A/Qϵ�е�ѹ�̵��Ϊ��ε�ѹ��·��ͱ��̵��ڼ̵籣��װ��·�У��Ϊ�͵�ѹ��Ķ��Ԫ��ѹ��
DJ-100A/Qϵ��ϵDJ-100ϵ�е�ѹ�̵��ĸĽ��Ʒ��ԭ��ѹ�̵��ڵĶ��ʹ��еİ�ȫ�ɿ��ԡ�

2 �ṹ�붯��ԭ��
2.1 �̵��ϵ��ʽ˲ʱ��ѹ��轵ѹ��ڴ�ϵͳ��Ȧ�ϡ��߳�ͷ�ڼ̵��Ķ��ϣ��Ƭ��ɽ��Ȧ��ʹ�̵��Χ�仯һ��
2.2 ��ڸü̵��Ϊ��ͣ��DJ-100�͵�ѹ�̵��ڿɶ�ϵͳ��ĥ��
2.3 �̵��ΪǶ��ʽ��װ��岿��Ϊ��ʽ�ṹ��
2.4 �̵��ڲ��ͼʾ��ͼ1��
2.5 �̵��μ��װ�ߴ�ͼʾ��ͼ2��

ͼ1 DJ-100A��Qϵ�е�ѹ�̵��ڲ��ͼ��ӣ�
��ΪDJ-111 112A/Q DJ-121 122A/Q DJ-131 132A/Q 131A/Q160CN DJ-131A/Q160C

ͼ2 DJ-100A��Qϵ�е�ѹ�̵��μ��װ�ߴ�ͼ

3 ��Ҫ��
3.1 ��Ĵ��ѹ�ڡ�220V��¼��2Aʱ��ھ��е�и��ɵ�ֱ��(ʱ�䳣��T��5× 10-3S)��Ϊ50W��ڽ��·��Ϊ250VA��
3.2 ��ʱ�䣺��ѹ�̵��1.1��ֵʱ��ʱ�䲻��0.12s��2��ֵʱ��ʱ�䲻��0.04s��͵�ѹ�̵��0.5��ֵʱ��ʱ�䲻��0.15s��
3.3 �̵��ĵ��粿�ֶ��ǵľ�Ե��Ӧ��ܽ��50Hz��ѹ2kY��ʱlmin��顣
3.4 �̵��Լlkg��
3.5 �̵��Ĳ��ּ��±��

��	��Χ ��V��	��ѹ��V��		��		�� ϵ��	�� ��С��ѹʱ�� ��VA��	��ע
��	��Χ ��V��	��Ȧ��	��Ȧ��	��	��	�� ϵ��	�� ��С��ѹʱ�� ��VA��	��ע
DJ��11lQ	15��60 50��200 100��400	70 220 440	35 110 220	1		0��8 �� �� �� �� �� �� �� �� 0��8	1	��ѹ �̵��
DJ��12lQ	15��60 50��200 100��400	70 220 440	35 110 220		l
DJ��13lQ	15��60 50��200 100��400	70 220 440	35 110 220	1	1
DJ-131A��Q60C DJ��131Q��60CN	15��60 15��60	220 220	110 110	1	1		l
DJ��112Q	12��48 40��160 80��320	70 220 440	35 110 220	1		1��25	1	�͵�ѹ �̵��
DJ��122Q	12��48 40��160 80��320	70 220 440	35 110 220		1
DJ��132Q	12��48 40��160 80��320	70 220 440	35 110 220	1	1

4 ��֪
4.1 �̵��ͺż��ơ�
4.2 ��ֵ(��ѹ)��
4.3 �̵��

[ʱ��̵��]SS-60��ʱ��̵��

2026-2-16 16:46:05

1.��

SS-60��ʱ��̵��ڸ��ֽ��ƻ�·�У�ʹ��Ԫ��ﵽ��ʱ��ر��ڸ��Ҫ��ʱ��ȸߡ��С��Զ��豸�С�

3.��Ҫ��

���ѹ��50HZ��200V��127V��110V��100V��
��ʽ��ʱ��Χ:��
��ʽ��һ��ʱת��
һ��ԣ��1��
��ģ��3.5W��
��ڵ�ѹ��250V,��Խ��5A��ʱ�䳣��Ϊ5 ±0.75ms��ֱ��ии��ɵ�·�У��Ʒ��ĶϿ��Ϊ50W��涨�ĸ��£��Ʒ�ܿɿ��5 x 104�Ρ��㳤��ͨ��Ϊ5A��
��ǿ�ȣ��Ʒ��һ�𣬶��¶�ķǴ��ֻ��֮�䣬�ܳ��2000V(��Чֵ)50Hz�Ľ��ѹ��ʱ1��޾�Ե��

4.�ڲ��

SS-60��ʱ��̵��

[ʱ��̵��]BS-110B,120B,160B,170B,180Bʱ��̵��

2026-2-16 16:45:57

��Ʒ��
BS-110B,120B,160B,170B,180Bʱ��̵��ڵ��ϵͳ�̵籣��װ�ü��Զ��װ��У��Ϊ��ʱ��Ԫ��ʹ��豸��·��Ԥ��ʱ��
��нϸߵ��ʱ׼ȷ�ȣ��ɿ��Ըߡ��ڷ�ֹ�ܶ��⣻��˵��Ա��ִ��㣬��ֱ�ӽ�ͨ��բ��·��DS-110��DS-20��DS-30��ʱ��̵��ֱ��ͬ��ǣ��ֿ��˶��ӽ��̵��Ķ�Ӧ��ϵ��Է��Ľ��л��ʹ�á�

BS-110B��120B��160B��170B��180Bʱ��̵��

[��̬�̵��]SSR-LA-Hϵ�й�̬�̵��

2026-2-16 16:45:50

SSR-LA-Hϵ�й�̬�̵��

SSR-10/15/25/40/50/80LA-H
ʹ�û��¶ȣ�-20��~+80��
ʹ�û��ʪ�ȣ�45~85%RH

��װָʾ��(LED)ָʾ�䶯��
�߾�Ե�迹��50M��(500VDC)
��ѹ��2.5KV
��㴥��ʽ��Ч��Ƶ/��Ÿ��
��װ��·��˲��ͻ��

��	SSR-10LA-H	SSR-15LA-H	SSR-25LA-H	SSR-40LA-H	SSR-50LA-H	SSR-80LA-H
��	10A	15A	25A	40A	50A	80A
��
��ѹ	--
��	4~20mA
��Ʒ�ʽ	Zero Cross Trigger
��
��ѹ	250~480VDC
��ON��ѹ�½�	1.6V
©��	<5.0mA
��Ӧʱ��	ON<10ms��OFF<10ms
һ��
��Ե��	Min.50M�� 500VDC��
��ѹǿ��	2500VAC 50/60 Hz for 1 min
ʹ�û��¶�	-20��~+80��
ʹ�û��ʪ��	45~85%RH
��	Appr.105g

SSR-LA-Hϵ�й�̬�̵��ͼ

SSR-LA-Hϵ�й�̬�̵��

[�м�̵��]XJBZ-E��м�̵��

2026-2-16 16:45:43

XJBZ-E��м�̵��

[��̬�̵��]TGJ33,TGJ34��ܲ��ѹ��

2026-2-13 18:43:56

��		TGJ33	TGJ34
�� �� �� ��	��ѹ	440/660 VAC
	��ѹ	0 �� (��ѹ)
	��	10��350 A
	��Ʒ�ʽ	��10k��/0.5W��λ��	��ź�:��ѹ��0-10VDC ��4��20mA
	��Ƶ�Դ	12��18 VDC
	��ѹ	��ƶ��˷ǵ��	��1800 V
	��Ե��ѹ	�� 2000 V
	��Ե��	��100 M��
	��Ƶ��	50��60 HZ
	��¶�	-20��70��
	ɢ��	��20A��ɢ��,��40A�ټӷ��ǿ��
	��ص��ȫϵ��	��Ը��3��4�� Ը��2��3��
	��γߴ�.(��)	105×74×41 mm3(J-3 ) 120×84×57 mm3(J-5 )

TGJ33,TGJ34��ܲ��ѹ��γߴ�.��װ��ͼ:(��λ:mm)

TGJ33,TGJ34��ܲ��ѹ��

[��̬�̵��]SSVR-60A��̬��ѹ��

2026-2-13 18:43:36

SSVR-60A��̬��ѹ��

[��̬�̵��]TGZ11,TGZ13��̬��ѹ��

2026-2-13 18:43:20

��		�벨��
		TGZ11	TGZ13
�� �� �� ��	��ص�Դ��ѹ	0-240 VAC 0-440 VAC
	��ѹ	0��0.45(��Դ��ѹ) VDC
	��ص��	20��40��80��100��150��200��250��300��350A
	��Ʒ�ʽ	��56-560K��/1W��λ��	��źŵ�ѹ0-10 VDC
	��ѹ	�ǵ��	��1800 V
	��Ե��ѹ	�� 2000 V
	��Ե��	��100 M��
	��Ƶ��	50��60 HZ
	��¶�	-20��70��
	ɢ��	��20A��ɢ��,��40A�ټӷ��ǿ��
	��ص��ȫϵ��	��Ը��3��4�� Ը��2��3��
	��γߴ�.(��)	58×45×21 mm3 ( J-1 ) 120×52×32 mm3 ( M-3 )

TGZ11,TGZ13��̬��ѹ��γߴ�.��װ��ͼ:(��λ:mm)

TGZ11,TGZ13��̬��ѹ��

2026-2-12 18:41:17

·��÷�Χ��;

JYB82-2/3��ø��ͼ�©�̵��ھ��б�ը����飩��ú��ú��£��ڽ��50Hz��ѹΪ660V��380V��Ե�Եؾ�Ե�Ĺ��У��翪��ϣ�ʵ��һ��©�籣��ѡ��©�籣��Է�ֹ��¹ʼ��©��¹ʵ��

·�ͺż��

·JY82-2/3��ø��ͼ�©�̵��Ҫ��

�ͺš��	��·��ѹ ��V��	��ֵ ��k��	��ྭ1k��ӵض��ʱ��		��ྭ1k�� ��ص��mA
			��ʱms	��ʱms
JY82	380	3.5	��50	300-400	��120
	660	11

ע�� a.��ص��ֲ��α.1΢��/ÿ��Եأ�
�� b. ��Ʒ��ִ�м̵��Ĵ�ͷ�飬�ڵ�ѹΪ60V��Ƶ��Ϊ50Hz��COS��α.4��ֺܷ�1��

[ģ��̵��]MZJ-2-NP��ģ��̵��

2026-2-12 18:08:02

MZJ-2-NP��ģ��̵��

[ģ��̵��]MZJ-8-NP-1Z��ģ��̵��

2026-2-12 18:06:56

MZJ-8-NP-1Z��ģ��̵��

[ģ��̵��]MZJ-16-NP-C��ģ��̵��

2026-2-12 18:04:43

MZJ-16-NP-C��ģ��̵��

[ģ��̵��]MZJ-4-1Z�͹�24Vģ��̵��

2026-2-12 18:02:17

MZJ-4-1Z�͹�24Vģ��̵��

[ģ��̵��]MZJ-16-NP-PAIA��ģ��̵��

2026-2-12 17:53:15

MZJ-16-NP-PAIA��ģ��̵��

[ģ��̵��]MZJ-8-NP-C��ģ��̵��

2026-2-12 17:51:19

MZJ-8-NP-C��ģ��̵��

[ģ��̵��]MJC-E25,MJC-E25B��ģ��̵��

2026-2-12 17:47:32

MJC-E25,MJC-E25B��ģ��̵��

[ģ��̵��]MZJ-16-NP��ģ��̵��

2026-2-12 17:45:03

MZJ-16-NP��ģ��̵��

[ģ��̵��]MJC-F34��ģ��̵��

2026-2-12 17:44:06

MJC-F34��ģ��̵��

[ģ��̵��]MZJ-10-NP-C��ģ��̵��

2026-2-12 17:43:15

MZJ-10-NP-C��ģ��̵��

[ģ��̵��]MZJ-8-NP��ģ��̵��

2026-2-12 17:42:00

MZJ-8-NP��ģ��̵��

[ģ��̵��]MZJ-8�͹�24V��ģ��̵��

2026-2-12 17:41:53

MZJ-8�͹�24V��ģ��̵��

[ģ��̵��]MZJ-12-NP-1Z��ģ��̵��

2026-2-12 17:41:30

MZJ-12-NP-1Z��ģ��̵��

[ģ��̵��]MJC-F50��ģ��̵��

2026-2-12 17:40:49

MJC-F50��ģ��̵��

[ģ��̵��]MJC-F64��ģ��̵��

2026-2-12 17:34:45

MJC-F64��ģ��̵��

[ģ��̵��]MDO-8-NN��ģ��̵��

2026-2-12 17:31:24

MDO-8-NN��ģ��̵��

[ģ��̵��]MDO-16-NN��ģ��̵��

2026-2-12 17:18:37

MDO-16-NN��ģ��̵��

Shanghai Huabang Industrial Business Network - relay

[solid state relay]WK����-WK Series Remote Control Switch Solid State Relay

[solid state relay]MK����- MK Solid State Relay

[solid state relay]GKZ��-W series single-phase high-power AC frequency voltage regulation module

[solid state relay]JGJ10,JGJ11 Direct insertion horizontal single-phase AC solid-state relay

[solid state relay]JGJ16B Single phase hybrid ultra small single-phase AC solid-state relay

[solid state relay]JGJ12,JGJ12B Direct insertion vertical single-phase AC solid-state relay

[solid state relay]JGJ13,JGJ14 Single phase horizontal single-phase AC solid-state relay

[solid state relay]JGJ15 Single phase horizontal capacitive load dedicated single-phase AC solid-state relay

[solid state relay]Horizontal passive control single-phase AC solid-state relay

[solid state relay]MTS1 series solid-state time relay

[solid state relay]GZ Series DC Solid State Relay

[solid state relay]GJJ series AC zero crossing solid-state relay

[solid state relay]GJJH series three-phase zero crossing solid-state relay

[solid state relay]GJNH series AC three-phase non zero crossing solid-state relay

[solid state relay]GJN Series AC Non Zero Crossing Solid State Relay

[solid state relay]GJH-W Series AC High Voltage Three Phase Solid State Relay

[solid state relay]GJH series AC high-voltage zero crossing solid-state relay

[solid state relay]GJ series AC zero crossing solid-state relay

[solid state relay]GKZ-W Frequency regulation module

[solid state relay]Single phase AC phase-shifting voltage regulation module

[solid state relay]GKK40-W series single-phase AC phase-shifting voltage regulation module

[solid state relay]GKK100-W series single-phase high-power AC voltage regulation module

[solid state relay]GJH Two phase AC Solid State Relay (with accompanying heat sink)

[solid state relay]Three phase motor forward and reverse solid-state relay

[solid state relay]GJ-WT(G) series thyristor solid-state voltage regulator module

[solid state relay]TSR-100AA-H Three phase AC Solid State Relay (High Voltage Type)

[solid state relay]TSR-100AA-S Three phase AC Solid State Relay (Basic Type)

[solid state relay]TSR-40AA-H Three phase AC Solid State Relay (High Voltage Type)

[solid state relay]TSR-40AA-S Three phase AC Solid State Relay (Basic Type)

[solid state relay]TSR Three phase current type voltage regulating solid-state relay

[solid state relay]TSR-40DA-W Three phase voltage type regulating solid-state relay

[solid state relay]SSR-40WA Single phase AC voltage type solid-state voltage regulator (power and voltage regulation module)

[solid state relay]SSR Single phase AC voltage type solid-state voltage regulator (power and voltage regulation module)

[solid state relay]Single phase current type solid-state voltage regulator (power and voltage regulation module)

[solid state relay]SSR-40VA single-phase resistive solid-state voltage regulator

[solid state relay]Integrated high-power solid-state relay

[solid state relay]Integrated high-power solid-state relay

[solid state relay]Integrated medium power solid-state relay

[solid state relay]Integrated medium power solid-state relay

[solid state relay]{{EN_0} �� DD Solid state relay

[solid state relay]{{EN_0} �� R Solid state relay

[solid state relay]{{EN_0} �� A Solid state relay

[solid state relay]{{EN_0} �� D Solid state relay

[solid state relay]SSR-40A Solid state relay

[solid state relay]SSR-25DA Solid state relay

[solid state relay]JGX-3F Solid state relay

[solid state relay]JGX-2F Solid state relay

[solid state relay]SSR-M Solid state relay

[solid state relay]SSR-3DA Solid state relay

[solid state relay]SSR-DD Solid state relay

[solid state relay]SSR-DD-MA Solid state relay

[solid state relay]SSR-VR Solid state relay

[solid state relay]SSR-DA Solid state relay

[solid state relay]SSR-AA Solid state relay

[solid state relay]SSR-P Solid state relay

[solid state relay]Single phase circuit board DC solid-state relay

[solid state relay]Single phase circuit board DC solid-state relay

[solid state relay]Single phase circuit board DC solid-state relay

[solid state relay]Single phase circuit board DC solid-state relay

[solid state relay]Single phase circuit board DC solid-state relay

[solid state relay]Single phase circuit board DC solid-state relay

[solid state relay]YJGX-7FA single-phase circuit board AC solid-state relay

[solid state relay]YJGX-6FA single-phase circuit board AC solid-state relay

[solid state relay]YJGX-5FA single-phase circuit board AC solid-state relay

[solid state relay]YJGX-4FA single-phase circuit board AC solid-state relay

[solid state relay]YJGX-3FA single-phase circuit board AC solid-state relay

[solid state relay]YJGX-1FA single-phase circuit board AC solid-state relay

[solid state relay]JSG4 series solid-state time relay

[electromagnetic relay]JZC-6Z2CM Type Small Power Relay

[electromagnetic relay]JRW-230MA type electromagnetic relay JRW-230MA,JRW-231MA,JRW-232MA

[electromagnetic relay]JRW-230MF type electromagnetic relay

[electromagnetic relay]JPW-220M type electromagnetic relay

[electromagnetic relay]JMW-271M type electromagnetic relay

[electromagnetic relay]JMW-270M type electromagnetic relay

[electromagnetic relay]KJRW-16MA type electromagnetic relay

[electromagnetic relay]JRW-240MD type electromagnetic relay JRW-240MD,JRW-241MD,JRW-241MB

[electromagnetic relay]JRW-240M type electromagnetic relay JRW-240M,JRW-241M,JRW-242M

[electromagnetic relay]JRW-230M type electromagnetic relay JRW-230M,JRW-231M

[electromagnetic relay]JRW-220M type electromagnetic relay JRW-220M,JRW-221M,JRW-222M

[solid state relay]WK��-WK Series Remote Control Switch Solid State Relay

[solid state relay]MK��- MK Solid State Relay