Shanghai Huabang Industrial Business Network - DC motor

[Special DC motor]J40WSPB01 type shielded pump motor

2026-5-2 15:52:09

J40WSPB01 shielded pump motor

[Special DC motor]J28WSPB02 type shielded pump motor

2026-5-2 13:45:41

J28WSPB02 shielded pump motor

[Special DC motor]58SYX,60SYX series medical instrument dedicated low-speed DC brushed motor

2026-5-2 13:45:38

58SYX, 60SYX series medical instrument dedicated low-speed DC brushed motor

[Special DC motor]ZZGJZ(F) series port tire crane dedicated DC motor

2026-5-2 13:45:35

ZZGJZ (F) series port tire crane dedicated DC motor

Power range: 16-55KW;
Rated voltage: 400V, 440V;
Excitation method: compound excitation, series excitation;
Benchmark working system: S2-60min or S3-60%

[Special DC motor]ZFQ Type Port Tire Crane Special DC Generator

2026-5-2 13:45:32

ZFQ type port tire crane dedicated DC motor

Power range: 45, 65, 80KW;
ZFQ DC Generator Series: 230V, 320V (ZFQS-6035 is 400V)
ZFQ DC Generator Series: Parallel Excitation, Compound Excitation (ZFQS-6035 is Other Excitation)

[Special DC motor]ZZG series port tire crane dedicated DC motor

2026-5-2 13:45:29

ZZG series port tire crane dedicated DC motor

Power range: 11-55KW;
Rated voltage: 220V, 320V;
Excitation method:

ZZG DC Motor Series: Series Excitation;
Benchmark working system: S2-60min or S3-60%

Purpose:
The ZZG series DC motor is suitable for powering ZFQ DC generators and can withstand the requirements of rapid load changes. It has good commutation, a wide speed range, smoothness, convenience, and high overload capacity, and can withstand frequent impact loads; It has the advantages of fast starting, braking, and reversing. Mainly used for tire cranes, as well as other similar working conditions for lifting and construction machinery.

[Special DC motor]DC motor for ZBJD type variable pitch system

2026-5-2 13:45:25

The ZBJD type slurry system uses a DC motor to enhance the structural mechanical strength, heat dissipation and cooling, and the ability of the stator and rotor windings to withstand pulse voltage of the entire machine, while still maintaining the characteristics of small size, light weight, stable and reliable operating performance, long service life, and interchangeability with similar imported motors.

The basic performance and technical requirements of the DC motor used in the ZBJD type slurry system comply with the provisions of GB755 "Rotating Electrical Machinery Rating and Performance", and the installation dimensions comply with the international standard IEC72.

Model number	Rated torque (Nm)	Rated power (kW)	Short time overload torque (Nm)	Weight (kg)
ZBJD-112L	sixteen	About 4.2	sixty	About 65
ZBJD-112LM	twenty-one	About 5.3	seventy	About 75
ZBJD-112LL	thirty	About 6.0	one hundred	About 90

[Special DC motor]ZBD-93 type DC motor

2026-5-2 13:45:12

The ZBD-93 DC motor is designed specifically for gantry planers, with a power of 60KW, a speed of 1000 revolutions per minute, and a rated voltage of 220V. It can be customized according to customer requirements.

[Special DC motor]DC auxiliary motor for ZTP type railway locomotives and bullet trains

2026-5-2 13:45:10

I. Overview

ZTP type DC auxiliary motor, specifically designed for driving hydraulic pumps, blowers, air compressors, auxiliary generators, speed generators, and other auxiliary mechanical motors on diesel locomotives and electric locomotives.

2. The motor should be able to meet the general technical requirements OXD.515.010-2001 or other specialized technical requirements for DC auxiliary motors used in railway locomotives and high-speed trains. The motor can withstand the impact and vibration generated during the normal operation of locomotives and trains, and can operate normally during rain, snow, wind, and sand invasion. Suitable for ambient temperatures ranging from -40 �� to+45 ��; The altitude shall not exceed 1200m. If it exceeds 1200m to 4000m, please refer to the technical specifications.

Model Description of DC Auxiliary Motors for ZTP Railway Locomotives and Electric Cars

2�� Motor Model Description
ZTP-62K: "Z" represents DC motor, "T" represents railway transportation, "P" represents dedicated supporting equipment, "62" represents machine base number, and "K" represents differential code.
2. ZBT - Model represents the DC enclosed railway supporting motor.

3�� Structural type
Basic installation type of motor
1. Horizontal, machine base with feet (IMB3) as shown in Figure 1: ZTP-1~5, 62K, 62Kl, 62K2, 62G, 82B, ZBT-12.
2. Horizontal, with a base and a flange on the end cover (IMB35) as shown in Figure 2: ZTP-1-3, 12D, 22Z; Figure 3: ZTP-63K; Figure 4: ZTP-6 3K1; Figure 5: ZTP-63D.
3. Horizontal, machine base with feet, flange on end cover (round end cover) (IMB35), outlet box at the top, see Figure 6: ZTP-22B.
4. Horizontal, footless, with flange on the machine base (IMBl0) as shown in Figure 7: ZTP-62A, 63A, 63B, 63B1, ZBT-63.
5. Horizontal, footless, with flange on the machine base (IMBl0) as shown in Figure 8: ZTP-62A1;
6. Vertical, footless, shaft extending downwards, with flange on the machine base (IMVl0) as shown in Figure 8: ZTP-62L, 63L; Figure 9: ZTP-61L.
7. Other installation types, single axis extension or double axis extension motors can also be made according to user needs. Single axis extension motors can be equipped with speed generators or other speed measurement devices at the non transmission end.
The motor outlet box for IMB3 and IMB35 installation types is located on the left side of the machine base (positive box) when viewed from the transmission end. If the user needs, it can also be located on the right side of the machine base (reverse box) or above the machine base. The motor with IMBl0 and IMVl0 installation types does not have an outlet box.

4�� Ordering Notice
1. Before placing an order, please refer to the product sample to clarify the technical data such as the model and specifications of the required product. If there are any discrepancies between the required variety and specifications and the sample, please contact our factory. If there are special requirements, please make specific requirements in advance. After mutual agreement, sign a contract or technical agreement.
When placing an order, please specify the motor model, power, voltage, speed, working system, structural installation type, excitation method, excitation voltage, number of output shafts, outlet box position, rotation direction, as well as the required accessories, spare parts name, quantity, etc.
3. If there are wet tropical requirements for supporting overseas travel, please specify them in the contract.

Model number	Rated power	Rated voltage	Rated current	Rated speed	excitation method	Rated efficiency	working system	weight	Remarks
Model number	kW	V	A	r/min	excitation method	%	working system	kg	Remarks
ZTP-11	zero point four	one hundred and ten	five point three five	one thousand and five hundred	and	sixty-eight	S1	thirty	Internal combustion locomotive, fuel pump motor
	zero point eight		nine point nine six	three thousand	and	seventy-three	S1		Electric locomotive, driver's service motor for voltage regulating switch
	zero point eight		nine point nine six	two thousand and eight hundred	and	seventy-three	S1
ZTP-12	zero point six	one hundred and ten	seven point six eight	one thousand and five hundred	And he has 110V	seventy-one	S1	thirty-five	Internal combustion locomotive, fuel pump motor
	zero point six	seventy-eight point five	ten point eight	one thousand and five hundred	and	seventy point eight	S1		Internal combustion locomotive, fuel pump motor
	zero point six	seventy-eight point five	seven point six four	three thousand	He has 78.5V	seventy point eight	S1		Internal combustion locomotive, speed generator
	zero point six	seventy-five	eleven point four	one thousand four hundred and fifty	He has 110V	seventy point two	S1		Internal combustion locomotive, fuel pump motor
	zero point six	two hundred and twenty	two point seven three	one thousand and five hundred	He is 8.5A	***	S1		generator
	zero point eight	one hundred and ten	nine point three two	two thousand	He has 110V	seventy-eight	S1
	one point one	ninety-six	fourteen point eight eight	three thousand	and	seventy-seven	S1
	one point one	one hundred and ten	twelve point nine	three thousand	and	seventy-seven point five	S1		Diesel locomotive, ventilation fan motor
	zero point six	one hundred and ten	seven point two seven	three thousand	and	seventy-five	S1		Internal combustion locomotive, fuel pump motor
ZBT-12	one point three	one hundred and ten	fifteen point four	three thousand	and	seventy-six point seven	S1		Diesel locomotive, ventilation fan motor
ZTP-12D	zero point five	one hundred and ten	six point two	one thousand and four hundred	He has 110V	seventy-three point three	S1		Used for electric locomotives
ZTP-21	one point three	one hundred and fifteen	eleven point three	three thousand and three hundred	He has 60V	***	S1	fifty	Internal combustion locomotive, speed generator
ZTP-21	one point three	one hundred and fifteen	eleven point three	three thousand and three hundred	He has 10V	***	S1	fifty	Internal combustion locomotive, speed generator
ZTP-22	one point one	one hundred and ten	thirteen	one thousand and five hundred	and	seventy-six point nine	S1	fifty-five
	one point one	sixty-five	twenty-two point five	one thousand and five hundred	skewer	seventy-five point two	S1
	one point one	forty-eight	thirty point five	one thousand and five hundred	and	seventy-five point one	S1		Diesel locomotive, dining car freezer motor
	two point two	one hundred and ten	twenty-four point seven	three thousand	and	eighty-one	S1
	two point two	ninety-six	twenty-eight point three	three thousand	and	eighty point nine	S1
	one point one	one hundred and ten	thirteen	one thousand and five hundred	again	seventy-six point nine	S1
ZTP-22B	one	one hundred and ten	twelve point two	one thousand two hundred and forty-five	and	***	S1		Internal combustion locomotive, fuel pump motor
	one point six		eighteen point six	one thousand and eight hundred	and	***	S1
	two point two		twenty-four point five	two thousand four hundred and fifty	and	***	S1
ZTP-22Z	one point eight	one hundred and ten	twenty point three	two thousand and two hundred	again	eighty point six	S1
ZTP-31	zero point four	one hundred and ten	three point six four	one thousand	He is 8.5A	***	S1	sixty-seven	generator
	two point two	one hundred and ten	twenty-five point two	two thousand	and	seventy-nine point four	S1
	one point one	twenty-four	sixty-two	three thousand	and	seventy-three point nine	S1		Test bench use
ZTP-32	zero point seven	one hundred and ten	eight point four eight	one thousand	He has 110V	seventy-five	S1	seventy-nine	Test bench use
ZTP-41	four point five	ninety-six	fifty-seven point eight	two thousand and two hundred	and	eighty-one	S1	eighty-five	Diesel locomotive, oil pump motor
ZTP-41	four point five	seventy-five	seventy-four	two thousand and two hundred	and	eighty-one	S1	eighty-five
ZTP-42	one point two	forty-eight	thirty-four	nine hundred	and	seventy-three point five	S1	one hundred
ZTP-52	six	seventy-eight point five	ninety-three point five	one thousand two hundred and fifty	and	eighty-one point seven	S1	one hundred and fifty-six	Diesel locomotive, oil pump motor
ZTP-52	seven point five	seventy-eight point five	one hundred and fifteen	one thousand and five hundred	and	eighty-three	S1	one hundred and fifty-six	Diesel locomotive, oil pump motor
ZTP-62G	thirteen	one hundred and ten	one hundred and thirty-nine	one thousand and five hundred	and	eighty-five	S1	two hundred	Internal combustion locomotive, air motor
ZTP-61L	eleven	two hundred and twenty	fifty-eight point two	two thousand	skewer	eighty-five point nine	S1	one hundred and forty	Electric locomotive, ventilation fan motor
ZTP-62K	nine	seventy-four	one hundred and forty-eight	one thousand	skewer	eighty-two point one	S4(60%)	two hundred	Internal combustion locomotive, air compressor motor
	nine	seventy-eight point five	one hundred and thirty-nine	one thousand	skewer	eighty-two point four	S4(40%)
	thirteen	one hundred and ten	one hundred and thirty-nine	one thousand and five hundred	skewer	eighty-five	S1
ZTP-62K1	ten point four	seventy-eight point five	one hundred and sixty-five	one thousand and two hundred	and	eighty point two	S1	two hundred
ZTP-62K2	eighteen point five	one hundred and ten	two hundred and ten	one thousand and five hundred	skewer	eighty	S4(50%)	two hundred
ZTP-63K	twenty-four	one hundred and ten	two hundred and sixty-four	three thousand	skewer	eighty-two point six	S4(40%)	two hundred and thirty-five
ZTP-64K	twenty-four	one hundred and ten	two hundred and fifty-four	three thousand	and	eighty-five point nine	S4(40%)	two hundred and thirty-five
ZTP-63K1	twenty-six	one hundred and ten	two hundred and seventy-eight	two thousand six hundred and fifty	and	eighty-five	S4(40%)	two hundred and forty
	twenty-six	one hundred and ten	two hundred and seventy-eight	two thousand and nine hundred	and	eighty-five	S4(40%)
	twenty-six	one hundred and ten	two hundred and seventy-eight	two thousand and nine hundred	skewer	eighty-five	S4(40%)
ZTP-63D	twenty	one hundred and ten	two hundred and sixteen point five	three thousand	skewer	eighty-four	S4(40%)	one hundred and twenty-five
ZTP-63D	twenty-four	one hundred and ten	two hundred and fifty-nine	three thousand	skewer	eighty-four point two	S4(40%)	one hundred and twenty-five
ZTP-62A	twenty-two	two hundred and forty	one hundred and seven point eight	three thousand and one hundred	skewer	***	S1	one hundred and fifty-five
ZTP-62A1	twenty-two	two hundred and twenty	one hundred and fifteen	three thousand and one hundred	skewer	***	S1	one hundred and fifty-five
ZTP-62L	twenty-two	two hundred and twenty	one hundred and fifteen	three thousand	skewer	***	S1	one hundred and fifty-five
ZTP-63A	twenty-seven point five	two hundred and sixty	one hundred and twenty-five	three thousand and five hundred	skewer	***	S1	one hundred and fifty-five
ZTP-63B	thirty	two hundred and sixty	one hundred and thirty-six	thirty-five thousand	skewer	***	S1	one hundred and fifty-five
ZTP-63B1	twenty-four	two hundred and fifty	one hundred and fifteen	three thousand and two hundred	skewer	***	S1	one hundred and fifty-five
ZTP-63L	thirty	two hundred and sixty	one hundred and thirty-six	three thousand and five hundred	skewer	***	S1	one hundred and sixty
ZTP-63	thirty	two hundred and sixty	one hundred and thirty-six	three thousand and five hundred	skewer	***	S2��60min	one hundred and sixty-five
ZTP-82B	thirteen	one hundred and ten	one hundred and forty-five	seven hundred and fifty	He has 110V	eighty	S1	four hundred and thirty	Internal combustion locomotive, vacuum pump motor
ZTP-82B	thirteen	one hundred and ten	one hundred and forty-five	seven hundred	He has 108V	eighty	S1	four hundred and thirty	Internal combustion locomotive, vacuum pump motor

ZTP type DC auxiliary motor for railway locomotives and high-speed trains

[Special DC motor]ZSN4 series cement rotary kiln main drive DC motor

2026-5-2 13:42:31

1�� Characteristics and Applications
The ZSN4 series DC motor is a specialized series developed by our company based on the Z4 series DC motor and the working conditions of the main drive of the cement rotary kiln.

This series of motors adopts an octagonal structure, with high utilization of stator space. The stator yoke is laminated and can withstand fluctuating currents and rapid changes in current. The motor is suitable for three-phase fully controlled bridge rectifier power supply and long-term operation without external DC smoothing reactors. The novel F-class insulation structure ensures the stability of insulation and good heat dissipation. Design and manufacture according to the specific working conditions of the cement rotary kiln, so that the starting torque of the motor can reach 2.5 times the rated torque. The cooling method of using pipeline ventilation or air-water cooler enables the motor to operate safely and reliably in harsh environments with high dust.

The performance of the ZSN4 series cement rotary kiln main drive DC motor complies with the national GB755-2000 "Rotating Electrical Machinery Rating and Performance" and can also be assessed according to the international standard IE34-1. The installation dimensions of the motor, except for the "B" dimension, comply with the IEC72 international standard.

2�� Model Description

3�� Performance of ZSN4 series cement rotary kiln main drive DC motor
1. The data in the technical data sheet should work according to the following usage conditions:
a. Altitude not exceeding 1000m
b. The temperature of the primary cooling medium entering the motor shall not exceed 40 ��
c. The motor operates continuously (S1)
d. The armature circuit and excitation of the motor can be powered by a static rectifier power supply or by a DC generator.
e. The air volume and pressure of the motor for pipeline ventilation and cooling must meet the requirements in the table below, and the air inlet should be located on the non commutator side end cover of the motor.

frame size	Airflow (m)^three/t��	Static pressure (Pa)
ZSN4-225	two thousand eight hundred and eighty	one thousand and four hundred
ZSN4-250	three thousand	one thousand and four hundred
ZSN4-280	four thousand	one thousand and six hundred
ZSN4-315	four thousand six hundred and eighty	one thousand and six hundred
ZSN4-355	five thousand and two hundred	one thousand and six hundred

2. The insulation level of the motor is Class F.
3. The standard voltage of the motor is 440V, and the excitation voltage is 180V. Other voltage levels and excitation voltage levels can be derived according to user requirements.
To ensure reliable insulation of the excitation system, a release resistor should be connected in parallel at both ends of the excitation winding when disconnecting the excitation circuit to prevent self induced potential. At standard excitation voltage, its value is about 7 times the excitation winding resistance (cold state). When the excitation voltage is higher than the standard voltage, the parallel release resistance can be less than 7 times, and vice versa, it can be greater than 7 times.
5. The ZSN4-225 machine base motor is equipped with a series winding, while other machine base sizes are equipped with compensation windings.
4�� Structural characteristics
1. The cooling method and shell protection level of the motor are shown in the following table:

cooling method	Single tube wind (IC17)	Double tube air (IC37)
protection level	IC23S	IP44

2. Installation form of motor: horizontal foot installation (IMB3). Motors can be manufactured as dual axis or single axis extension motors, and single axis extension motors can be equipped with speed measuring components (speed measuring generators, photoelectric encoders) and other corresponding accessories at the non transmission end.
3. Overheating protection components can be embedded in the stator winding of the motor as needed.
5�� Ordering Instructions
When placing an order, please specify the motor model, power, voltage, speed, structural form, excitation voltage, outlet box, location, and the model and quantity of the complete set of accessories (speed measuring components, overheating protection components) that need to be assembled. If a wet heat type is required, please add "TH" after the prototype number.

6�� Technical Data Sheet

ZSN4 series cement rotary kiln main drive DC motor

[DC brushless motor]J50SY300,J50SY100 type permanent magnet DC servo motor

2026-5-1 15:41:12

Technical parameters of J50SY100 permanent magnet DC servo motor

Rated voltage (V)	twenty-eight
Rated speed (r/min)	��4600
Rated torque (N · m)	zero point two two
Rated power (W)	one hundred and ten

Technical parameters of J50SY300 permanent magnet DC servo motor

Rated voltage (V)	twenty-eight
Rated speed (r/min)	��8500
Rated torque (N · m)	zero point one five
Rated power (W)	one hundred and thirty

J50SY300, J50SY100 permanent magnet DC servo motor

[DC deceleration motor]88ZY-CJ02070-150A Brushed DC deceleration motor

2026-4-29 10:15:13

88ZY-CJ02070-150A brushed DC reduction motor

[DC deceleration motor]Gear Reduction Brushless DC Motor

2026-4-29 10:15:11

J75ZWX002-Z1 gear reduction brushless DC motor

[DC deceleration motor]J80ST01B Permanent magnet brushless DC deceleration motor

2026-4-29 10:15:09

J80ST01B permanent magnet brushless DC deceleration motor

[DC deceleration motor]J50ZWC01-SC1000,J60ZWC01A-SC1000 Permanent magnet brushless DC deceleration motor

2026-4-29 10:15:07

J50ZWC01-SC1000, J60ZWC01A-SC1000 permanent magnet brushless DC reduction motor

[DC deceleration motor]J48ZWC01 Permanent magnet brushless DC deceleration motor

2026-4-29 10:15:05

J48ZWC01 permanent magnet brushless DC deceleration motor

[DC deceleration motor]J40ZWX001-J1 Permanent magnet brushless DC deceleration motor

2026-4-29 10:15:02

J40ZWX001-J1 permanent magnet brushless DC deceleration motor

[DC deceleration motor]J32ZWC01 Permanent magnet brushless DC deceleration motor

2026-4-29 10:15:00

J32ZWC01 permanent magnet brushless DC deceleration motor

[DC deceleration motor]J28ZWX35-JPX30 Permanent magnet brushless DC deceleration motor

2026-4-29 10:14:58

J28ZWX35-JPX30 permanent magnet brushless DC deceleration motor

[DC deceleration motor]J22ZWC series permanent magnet brushless DC deceleration motor J22ZWC01,J22ZWC02,J22ZWC03,J22ZWC05,J22ZWC06

2026-4-29 10:14:55

J22ZWC series permanent magnet brushless DC deceleration motor

J22ZWC01,J22ZWC02,J22ZWC03,J22ZWC05,J22ZWC06

[DC deceleration motor]90ZYJ02 type DC brushed reduction motor

2026-4-29 10:14:53

90ZYJ02 type DC brushed reduction motor

Motor parameters	unit	Part Number
Motor parameters	unit	90ZYJ02
rated voltage	VDC	twenty-four
rated current	A	twenty-two
rated speed	rpm	two hundred and fifty
rated torque	Nm	nine point three
rated power	W	two hundred and forty-three
reduction ratio	rpm	18:1
Locked rotor torque	N.M	/
locked-rotor current	A	/
EMF constant	V/KRPM	/
line resistance	��	/
line inductance	mH	/

[DC deceleration motor]90ZYJ03-1 type DC brushed reduction motor

2026-4-29 10:14:40

90ZYJ03-1 DC brushed reduction motor

Motor parameters	unit	Part Number
Motor parameters	unit	90ZYJ03-1
rated voltage	VDC	twenty-four
rated current	A	twenty-two
rated speed	rpm	two hundred and fifty
rated torque	Nm	nine point three
rated power	W	two hundred and forty-three
reduction ratio	rpm	18:1
Locked rotor torque	N.M	/
locked-rotor current	A	/
EMF constant	V/KRPM	/
line resistance	��	/
line inductance	mH	/

[DC deceleration motor]90ZYJ01 type DC brushed reduction motor

2026-4-29 10:14:28

90ZYJ03 DC brushed reduction motor

Motor parameters	unit	Part Number
Motor parameters	unit	90ZYJ01
rated voltage	VDC	twelve
rated current	A	/
rated speed	rpm	/
rated torque	Nm	/
rated power	W	/
reduction ratio	rpm	391:1
Locked rotor torque	N.M	thirty-three
locked-rotor current	A	/
EMF constant	V/KRPM	/
line resistance	��	/
line inductance	mH	/

[DC deceleration motor]80ZYJ04 type DC brushed reduction motor

2026-4-29 10:14:11

80ZYJ04 DC brushed reduction motor

Motor parameters	unit	Part Number
Motor parameters	unit	80ZYJ04
rated voltage	VDC	one hundred
rated current	A	two
rated speed	rpm	thirty-two
rated torque	Nm	twenty
rated power	W	sixty-seven
reduction ratio	rpm	56:1
Locked rotor torque	N.M	/
locked-rotor current	A	/
EMF constant	V/KRPM	/
line resistance	��	/
line inductance	mH	/

[DC deceleration motor]80ZYJ03 type DC brushed reduction motor

2026-4-29 10:13:58

80ZYJ03 DC brushed reduction motor

Motor parameters	unit	Part Number
Motor parameters	unit	80ZYJ03
rated voltage	VDC	one hundred and ten
rated current	A	two
rated speed	rpm	thirty-two
rated torque	Nm	twenty
rated power	W	sixty-seven
reduction ratio	rpm	56:1
Locked rotor torque	N.M	/
locked-rotor current	A	/
EMF constant	V/KRPM	/
line resistance	��	/
line inductance	mH	/

[DC deceleration motor]80ZYJ02 type DC brushed reduction motor

2026-4-29 10:13:44

80ZYJ02 type DC brushed reduction motor

Motor parameters	unit	Part Number
Motor parameters	unit	80ZYJ02
rated voltage	VDC	two hundred and five
rated current	A	one
rated speed	rpm	thirty-two
rated torque	Nm	twenty
rated power	W	sixty-seven
reduction ratio	rpm	56:1
Locked rotor torque	N.M	/
locked-rotor current	A	/
EMF constant	V/KRPM	/
line resistance	��	/
line inductance	mH	/

[DC deceleration motor]80ZYJ01 type DC brushed reduction motor

2026-4-29 10:13:31

80ZYJ01 DC brushed reduction motor

rated voltage	VDC	two hundred and twenty
rated current	A	one
rated speed	rpm	thirty-two
rated torque	Nm	twenty
rated power	W	sixty-seven
reduction ratio	rpm	56:1
Locked rotor torque	N.M	/
locked-rotor current	A	/
EMF constant	V/KRPM	/
line resistance	��	/
line inductance	mH	/

[DC deceleration motor]80SWJ01 type brushless DC deceleration motor

2026-4-29 10:13:20

80SWJ01 brushless DC reduction motor

Motor parameters	unit	Part Number
Motor parameters	unit	80SWJ01
rated voltage	VDC	thirty-six
rated current	A	twenty-four
rated speed	rpm	one thousand one hundred and eighty
rated torque	Nm	five point five
rated power	W	six hundred and eighty
reduction ratio	rpm	4:1
Locked rotor torque	N.M	/
locked-rotor current	A	/
EMF constant	V/KRPM	/
line resistance	��	/
line inductance	mH	/

[DC deceleration motor]78ZYJ102 type DC brushed reduction motor

2026-4-29 10:13:07

78ZYJ102 DC brushed reduction motor

Motor Data	Units	Part No.
Motor Data	Units	78ZYJ102
voltage	VDC	twelve
rated current	A	ninety
rated torque	Nm	seventy-five
rated speed	rpm	thirty-six point five
rated power	W	two hundred and eighty-six
no-load speed	rpm	forty-six
reduction ratio	/	90��1

[DC deceleration motor]78ZYJ101 type DC brushed reduction motor

2026-4-29 10:12:58

78ZYJ101 DC brushed reduction motor

Motor Data	Units	Part No.
Motor Data	Units	78ZYJ101
rated voltage	VDC	twelve
rated current	A	one hundred and five
rated torque	Nm	sixty-five
rated speed	rpm	fifty-three
rated power	W	three hundred and sixty
no-load speed	rpm	seventy
reduction ratio	/	60��1

[DC deceleration motor]78ZYJ02 type DC brushed reduction motor

2026-4-29 10:12:44

78ZYJ02 type DC brushed reduction motor

Motor parameters	unit	Part Number
Motor parameters	unit	78ZYJ02
rated voltage	VDC	twelve
rated current	A	eighty
rated speed	rpm	fifty-two
rated torque	Nm	thirty point five
rated power	W	one hundred and sixty-six
reduction ratio	rpm	90:1
Locked rotor torque	N.M	/
locked-rotor current	A	/
EMF constant	V/KRPM	/
line resistance	��	/
line inductance	mH	/

[DC deceleration motor]78ZYJ01 type DC brushed reduction motor

2026-4-29 10:12:32

78ZYJ01 DC brushed reduction motor

Motor parameters	unit	Part Number
Motor parameters	unit	78ZYJ01
rated voltage	VDC	twelve
rated current	A	sixty
rated speed	rpm	seventy-nine
rated torque	Nm	seventeen point two
rated power	W	one hundred and forty-two
reduction ratio	rpm	60:1
Locked rotor torque	N.M	/
locked-rotor current	A	/
EMF constant	V/KRPM	/
line resistance	��	/
line inductance	mH	/

[DC deceleration motor]62ZYJ06 type DC brushed reduction motor

2026-4-29 10:12:19

62ZYJ06 DC brushed reduction motor

Motor parameters	unit	Part Number
Motor parameters	unit	62ZYJ06
rated voltage	VDC	twelve
rated current	A	seven point eight
rated speed	rpm	ninety-two point seven
rated torque	Nm	five point five
rated power	W	fifty-four
reduction ratio	rpm	47.5:1
Locked rotor torque	N.M	/
locked-rotor current	A	/
EMF constant	V/KRPM	/
line resistance	��	/
line inductance	mH	/

[DC deceleration motor]62ZYJ103 type DC brushed reduction motor

2026-4-29 10:12:03

62ZYJ103 DC brushed reduction motor

Motor Data	Units	Part No.
Motor Data	Units	62ZYJ103
rated voltage	VDC	twenty-four
rated current	A	twelve
rated torque	Nm	forty-five
rated speed	rpm	thirty-three
rated power	W	one hundred and fifty-five
no-load speed	rpm	forty
reduction ratio	/	135��1
protection level	/	IP44
weight	Kg	three

[DC deceleration motor]62ZYJ05-1 type DC reduction motor

2026-4-29 10:11:50

62ZYJ05-1 DC Reduction Motor

Motor parameters	unit	Part Number
Motor parameters	unit	62ZYJ05-1
rated voltage	VDC	twelve
rated current	A	three point four
rated speed	rpm	sixty-four
rated torque	Nm	two point five
rated power	W	seventeen
reduction ratio	rpm	52.8:1
Locked rotor torque	N.M	/
locked-rotor current	A	/
EMF constant	V/KRPM	/
line resistance	��	/
line inductance	mH	/

[DC deceleration motor]62ZYJ03-1 type DC reduction motor

2026-4-29 10:11:36

62ZYJ03-1 DC Reduction Motor

Motor Data	Units	Part No.
Motor Data	Units	62ZYJ03-1
rated voltage	VDC	twelve
rated current	A	eleven
rated torque	N.m	eight point eight
no-load speed	r/min	87±10%
Maximum current	A	thirty point eight
rated speed	r/min	64±10%
protection level	/	IP65
reduction ratio	/	52.8:1
Motor lifespan	/	2500 times (1.5-2 minutes per time)
Fuselage Length	mm	one hundred and one point five

[DC deceleration motor]62ZYJ102 type DC brushed reduction motor

2026-4-29 10:11:24

62ZYJ102 DC brushed reduction motor

Motor parameters	unit	Part Number
Motor parameters	unit	62ZYJ102
rated voltage	VDC	twelve
rated current	A	thirteen
rated speed	rpm	nineteen point six
rated torque	Nm	thirty
rated power	W	sixty-two
reduction ratio	rpm	234:1
Locked rotor torque	N.M	/
locked-rotor current	A	/
EMF constant	V/KRPM	/
line resistance	��	/
line inductance	mH	/

[DC deceleration motor]60ZWJ105 type DC reduction motor

2026-4-29 10:11:11

60ZWJ105 DC Reduction Motor

Motor parameters	unit	Part Number
Motor parameters	unit	60ZWJ105
rated voltage	VDC	twenty-four
rated current	A	/
rated speed	rpm	seven point two
rated torque	Nm	twelve
rated power	W	nine
reduction ratio	rpm	345:1
Locked rotor torque	N.M	/
locked-rotor current	A	/
EMF constant	V/KRPM	/
line resistance	��	/
line inductance	mH	/

[DC deceleration motor]60ZWJ104 type DC reduction motor

2026-4-29 10:10:58

60ZWJ104 DC Reduction Motor

Motor parameters	unit	Part Number
Motor parameters	unit	60ZWJ104
rated voltage	VDC	twenty-four
rated current	A	��0.6
rated speed	rpm	ten
rated torque	Nm	five
rated power	W	five point two three
reduction ratio	rpm	/
Locked rotor torque	N.M	/
locked-rotor current	A	/
EMF constant	V/KRPM	/
line resistance	��	/
line inductance	mH	/

[DC deceleration motor]60ZWJ103 type DC reduction motor

2026-4-29 10:10:46

60ZWJ103 DC Reduction Motor

Motor parameters	unit	Part Number
Motor parameters	unit	60ZWJ103
rated voltage	VDC	twenty-four
rated current	A	/
rated speed	rpm	four
rated torque	Nm	twenty
rated power	W	eight point four
reduction ratio	rpm	345:1
Locked rotor torque	N.M	/
locked-rotor current	A	/
EMF constant	V/KRPM	/
line resistance	��	/
line inductance	mH	/

[DC deceleration motor]60ZWJ102 type DC reduction motor

2026-4-29 10:10:33

60ZWJ102 DC Reduction Motor

Motor parameters	unit	Part Number
Motor parameters	unit	60ZWJ102
rated voltage	VDC	twenty-four
rated current	A	/
rated speed	rpm	ten
rated torque	Nm	five
rated power	W	five point two three
reduction ratio	rpm	267:1
Locked rotor torque	N.M	/
locked-rotor current	A	/
EMF constant	V/KRPM	/
line resistance	��	/
line inductance	mH	/

[DC deceleration motor]60ZWJ300 type DC reduction motor

2026-4-29 10:10:20

60ZWJ300 DC Reduction Motor

Motor parameters	unit	Part Number
Motor parameters	unit	60ZWJ300
rated voltage	VDC	forty-eight
rated current	A	/
rated speed	rpm	thirty
rated torque	Nm	four
rated power	W	thirteen
reduction ratio	rpm	50:1
Locked rotor torque	N.M	/
locked-rotor current	A	/
EMF constant	V/KRPM	/
line resistance	��	/
line inductance	mH	/

[DC deceleration motor]60ZWJ200 type DC reduction motor

2026-4-29 10:10:08

60ZWJ200 DC Reduction Motor

Motor parameters	unit	Part Number
Motor parameters	unit	60ZWJ200
rated voltage	VDC	one hundred and ten
rated current	A	one point eight
rated speed	rpm	four hundred and fifty-seven
rated torque	Nm	two point five
rated power	W	one hundred and twenty
reduction ratio	rpm	7:1
Locked rotor torque	N.M	/
locked-rotor current	A	/
EMF constant	V/KRPM	/
line resistance	��	/
line inductance	mH	/

[DC deceleration motor]60ZWJ100 type DC reduction motor

2026-4-29 10:09:55

60ZWJ100 DC Reduction Motor

Motor parameters	unit	Part Number
Motor parameters	unit	60ZWJ100
rated voltage	VDC	twenty-four
rated current	A	��5.6
rated speed	rpm	two hundred and eighty
rated torque	Nm	two point five
rated power	W	eighty
reduction ratio	rpm	10:1
Locked rotor torque	N.M	/
locked-rotor current	A	/
EMF constant	V/KRPM	/
line resistance	��	/
line inductance	mH	/

[DC deceleration motor]42ZYJ01 type DC reduction motor

2026-4-29 10:09:43

42ZYJ01 DC Reduction Motor

Motor parameters	unit	Part Number
Motor parameters	unit	42ZYJ01
rated voltage	VDC	twenty-four
rated current	A	��1.5
rated speed	rpm	one hundred and twenty
rated torque	Nm	zero point five
rated power	W	six point three
reduction ratio	rpm	61:3
Locked rotor torque	N.M	/
locked-rotor current	A	/
EMF constant	V/KRPM	/
line resistance	��	/
line inductance	mH	/

[DC deceleration motor]42ZWJ100 type DC reduction motor

2026-4-29 10:09:29

42ZWJ100 DC Reduction Motor

Motor parameters	unit	Part Number
Motor parameters	unit	42ZWJ100
rated voltage	VDC	twelve
rated current	A	/
rated speed	rpm	seventy
rated torque	Nm	zero point five
rated power	W	three point six
reduction ratio	rpm	/
Locked rotor torque	N.M	/
locked-rotor current	A	/
EMF constant	V/KRPM	five point two four
line resistance	��	five
line inductance	mH	four point six five

[DC deceleration motor]42ZWJ03 type DC reduction motor

2026-4-29 10:09:17

42ZWJ03 DC Reduction Motor

Motor parameters	unit	Part Number
Motor parameters	unit	42ZWJ03
rated voltage	VDC	nineteen
rated current	A	��2.5
rated speed	rpm	ninety-one
rated torque	Nm	two
rated power	W	nineteen
reduction ratio	rpm	/
Locked rotor torque	N.M	TBD
locked-rotor current	A	TBD
EMF constant	V/KRPM	two point one eight
line resistance	��	zero point six eight eight
line inductance	mH	zero point nine four nine

[DC deceleration motor]42ZWJ02 type DC reduction motor

2026-4-29 10:09:03

42ZWJ02 DC Reduction Motor

Motor parameters	unit	Part Number
Motor parameters	unit	42ZWJ02
rated voltage	VDC	nineteen
rated current	A	��0.8
rated speed	rpm	one hundred
rated torque	Nm	zero point eight
rated power	W	twelve point six
reduction ratio	rpm	/
Locked rotor torque	N.M	/
locked-rotor current	A	/
EMF constant	V/KRPM	/
line resistance	��	/
line inductance	mH	/

[DC deceleration motor]42ZWJ01 type DC reduction motor

2026-4-29 10:08:51

42ZWJ01 DC Reduction Motor

Motor parameters	unit	Part Number
Motor parameters	unit	42ZWJ01
rated voltage	VDC	twenty-four
rated current	A	one point four
rated speed	rpm	sixty-five
rated torque	Nm	three
rated power	W	two point four
reduction ratio	rpm	/
Locked rotor torque	N.M	nine
locked-rotor current	A	four point two
EMF constant	V/KRPM	four point two
line resistance	��	/
line inductance	mH	/

[DC deceleration motor]52ZY-CJ02020-7C-15A type permanent magnet DC brushed reduction motor

2026-4-29 10:08:38

52ZY-CJ0200-7C-15A permanent magnet DC brushed reduction motor

Motor model	rated voltage (DC voltage)	rated current ��A��	rated torque (Nm)	rated speed (Conversion/minute)	rated power (Watt)	IP rating	work system (minutes)
52ZY-CJ02020-7C-15A	twenty-four	one point six	five point six	thirty-four	twenty	sixty-five	S2

[DC deceleration motor]86ZY-CJ0118-1 type permanent magnet DC brushed reduction motor

2026-4-29 10:08:30

86ZY-CJ0118-1 permanent magnet DC brushed reduction motor

Motor model	rated voltage (DC voltage)	rated current ��A��	rated torque (Nm)	rated speed (Conversion/minute)	rated power (Watt)	work system (minutes)
86ZY-CJ0118-1	twelve	nineteen point five	twenty-two	fifty-two	one hundred and twenty	S2

[DC deceleration motor]64ZY-CJ04050(TH) type permanent magnet DC brushed reduction motor

2026-4-29 10:08:21

64ZY-CJ04050 (TH) type permanent magnet DC brushed reduction motor

Motor model	rated voltage (DC voltage)	rated current ��A��	rated torque (Nm)	rated speed (Conversion/minute)	rated power (Female)	work system (minutes)
64ZY-CJ04050 (Thailand)	forty-eight	two point three	fifty-nine point seven	eight	fifty	S2

[DC deceleration motor]64ZY-CJ04048-7C type permanent magnet DC brushed reduction motor

2026-4-29 10:08:13

64ZY-CJ04048-7C permanent magnet DC brushed reduction motor

Motor model	rated voltage (DC voltage)	rated current ��A��	rated torque (Nm)	rated speed (Conversion/minute)	rated power (Watt)	work system (minutes)
64ZY-CJ04048-7C	forty-eight				forty-eight	S2

[DC deceleration motor]64ZY-CJ2090-023 type permanent magnet DC brushed reduction motor

2026-4-29 10:08:06

64ZY-CJ2090-023 permanent magnet DC brushed reduction motor

Motor model	rated voltage (DC voltage)	rated current ��A��	rated torque (Nm)	rated speed (Conversion/minute)	rated power (Watt)	work system (minutes)
64ZY-CJ2090-023	two hundred and twenty	zero point nine	seventy-one	twelve	ninety	S2

[DC deceleration motor]64ZY-CJ2090-6B-1 type permanent magnet DC brushed reduction motor

2026-4-29 10:07:58

64ZY-CJ2090-6B-1 permanent magnet DC brushed reduction motor

Motor model	rated voltage (DC voltage)	rated current ��A��	rated torque (Nm)	rated speed (Conversion/minute)	rated power (Watt)	work system (minutes)
64ZY-CJ2090-6B-1	two hundred and twenty	zero point eight	five point five five	one hundred and fifty-five	ninety	S2

[DC deceleration motor]64ZY-CJ2070-S1 type permanent magnet DC brushed reduction motor

2026-4-29 10:07:49

64ZY-CJ2070-S1 permanent magnet DC brushed reduction motor

Motor model	rated voltage (DC voltage)	rated current ��A��	rated torque (Nm)	rated speed (Conversion/minute)	rated power (Watt)	work system (minutes)
64ZY-CJ2070-S1	two hundred and twenty		eighty-three point five	eight	seventy	S2

[DC deceleration motor]63ZY-CJ04065-1ZHJ type permanent magnet DC brushed reduction motor

2026-4-29 10:07:42

63ZY-CJ04065-1ZHJ permanent magnet DC brushed reduction motor

Motor model	rated voltage (DC voltage)	rated current ��A��	rated torque (Nm)	rated speed (Conversion/minute)	rated power (Watt)	work system (minutes)
63ZY-CJ04065-1ZHJ	forty-eight				sixty-five	S2

[DC deceleration motor]53ZY-CJ2040-DS type permanent magnet DC brushed reduction motor

2026-4-29 10:07:35

53ZY-CJ2040-DS permanent magnet DC brushed reduction motor

Motor model	rated voltage (DC voltage)	rated current ��A��	rated torque (Nm)	rated speed (Conversion/minute)	rated power (Watt)	work system (minutes)
53ZY-CJ2040-DS	two hundred and twenty	zero point five	twenty-two point four seven	seventeen	forty	S2

[DC deceleration motor]42ZY-CJ001-1 type permanent magnet DC brushed reduction motor

2026-4-29 10:07:24

42ZY-CJ001-1 permanent magnet DC brushed reduction motor

Motor model	rated voltage (DC voltage)	rated current ��A��	rated torque (Nm)	rated speed (Conversion/minute)	rated power (Watt)	work system (minutes)
42ZY-CJ001-1	twelve	six	two point seven eight	one hundred and twenty	thirty-five	S2

[DC deceleration motor]40ZY-CJ212-4 type permanent magnet DC brushed reduction motor

2026-4-29 10:07:16

40ZY-CJ212-4 permanent magnet DC brushed reduction motor

Motor model	rated voltage (DC voltage)	rated current ��A��	rated torque (Nm)	rated speed (Conversion/minute)	rated power (Watt)	work system (minutes)
40ZY-CJ212-4	two hundred and twenty	two point two	thirty-eight	thirty	one hundred and twenty	S2

[DC deceleration motor]68ZY-CJ02065-162 type permanent magnet DC brushed reduction motor

2026-4-29 10:07:07

68ZY-CJ02065-162 permanent magnet DC brushed reduction motor

Motor model	rated voltage (DC voltage)	rated current ��A��	rated torque (Nm)	rated speed (Conversion/minute)	rated power (Watt)	work system (minutes)	IP rating
68ZY-CJ02065-162	twenty-four	six	two hundred and forty	two point five	sixty-five	S2	sixty-five

[DC deceleration motor]40ZY-CJ01040-29 type permanent magnet DC brushed reduction motor

2026-4-29 10:06:58

40ZY-CJ01040-29 permanent magnet DC brushed reduction motor

Motor model	rated voltage (DC voltage)	rated current ��A��	rated torque (Nm)	rated speed (Conversion/minute)	rated power (Watt)	work system (minutes)
40ZY-CJ01040-29	twelve	sixteen	twenty	twenty	forty	S2

[DC deceleration motor]88ZY-CJ02070-150A type permanent magnet DC brushed reduction motor

2026-4-29 10:06:51

88ZY-CJ02070-150A permanent magnet DC brushed reduction motor

Motor model	rated voltage (DC voltage)	rated current ��A��	rated torque (Nm)	rated speed (Conversion/minute)	rated power (Watt)	work system (minutes)	IP rating
88ZY-CJ02070-150A	twenty-four	six point six	three hundred and twenty	two point one	seventy	S2	sixty-five

[DC deceleration motor]76ZYTJ series DC gear motor

2026-4-29 10:06:43

76ZYTJ series DC gear motor with a diameter of 76mm and planetary gear design
Insulation grade F, high temperature resistance of 155 degrees Celsius
Using imported silent bearings for longer service life
Using high-performance magnetic materials to replace brushed motors of the same power, with smaller size and longer lifespan
Planetary gear design, using gear grinding technology for lower noise and longer lifespan
Various drivers, encoders, etc. can be optionally installed, suitable for different automation equipment applications

76ZYTJ series DC gear motor (worm gear motor) can replace imported motors: AMETEK MCG PITTMAN
Widely used in various feeding systems, edge brush machinery, environmental protection machinery, etc

Standard Model Part Number	Unit	76ZYTJ01	76ZYTJ02
Rated Torque	N.m	three	five
Rotary Inertia	g.cm^two	ten point one	thirteen point two
Motor Length	mm	one hundred and two	one hundred and thirty-three
Total Length	mm	one hundred and thirty-four	one hundred and sixty-five
Weight	Kgs	three point six	three point eight

Different winding parameters: Winding Options	Unit	01L2	02L3
Rated Voltage	V	twenty-four	thirty-six
No load speed	rpm	one hundred and ninety	two hundred and fifty
No load current	A	one	one point three
Rated Speed	rpm	one hundred and fifty	one hundred and ninety
Rated Current	A	three	four point two
Rated power output	W	fifty	one hundred

[DC deceleration motor]80SWYEJ series brushless gear motor

2026-4-29 10:06:22

80SWYEJ series brushless gear motor
82mm brushless motor (automated modification) combined with high-precision planetary gearbox design
Insulation grade F, high temperature resistance of 155 degrees Celsius
Using imported silent bearings for longer service life
Using high magnetic performance materials and smaller volume
The 80SWYEJ series brushless gear motor (automated modification) adopts gear grinding technology, resulting in lower noise and longer lifespan of the gearbox
Various drivers, encoders, etc. can be optionally installed, suitable for other automation equipment applications
Can replace imported motors
Widely used in various electric balance vehicles, robot systems, thinking vehicles, etc

Standard Model Part Number	Unit	80SWYEJ01	80SWYEJ02
Rated Torque	N.m	nine	twelve
Rotary Inertia	g.cm^two	ten point one	thirteen point two
Total Length	mm	one hundred and fifty	one hundred and fifty
Weight	Kgs	three point six	three point seven

Different winding parameters: Winding Options	Unit	01L4
Rated Voltage	V	forty-eight
No load speed	rpm	eight hundred
No load current	A	two point two
Rated Speed	rpm	six hundred and fifty
Rated Current	A	sixteen
Rated power output	W	six hundred and twenty

[DC deceleration motor]122ZYTJ series DC gear motor

2026-4-29 10:06:04

122ZYTJ series DC gear motor
122mm motor diameter, planetary gear design
Insulation grade F, high temperature resistance of 155 degrees Celsius
Using imported silent bearings for longer service life
Using high-performance magnetic materials to replace brushed motors of the same power, with smaller size and longer lifespan
Planetary gear design, using gear grinding technology for lower noise and longer lifespan
Various drivers, encoders, etc. can be optionally installed, suitable for different automation equipment applications
Can replace imported motors: ELECTRORAFT
Widely used in various feeding systems, edge brush machinery, environmental protection machinery, floor sweepers, etc

Standard Model Part Number	Unit	122ZYTJ01	122ZYTJ02
Rated Torque	N.m	twelve	sixteen
Rotary Inertia	g.cm^two	one hundred and thirty-six	one hundred and fifty-six
Total Length	mm	one hundred and sixty-five	one hundred and eighty-five
Weight	Kgs	six point two	six point five

Different winding parameters: Winding Options	Unit	01L3	02L4
Rated Voltage	V	thirty-six	forty-eight
No load speed	rpm	two hundred and twenty	two hundred and fifty
No load current	A	one point six	one point five
Rated Speed	rpm	two hundred and three	two hundred and ten
Rated Current	A	twelve	twelve point five
Rated power output	W	two hundred and fifty-five	three hundred and fifty-one

[DC deceleration motor]J95ZWX002-J1 type gear reduction brushless DC motor

2026-4-29 10:05:43

J95ZWX002-J1 type gear reduction brushless DC motor

[DC deceleration motor]Gear Reduction Brushless DC Motor

2026-4-29 10:05:40

J75ZWX001-J1 gear reduction brushless DC motor

[DC deceleration motor]J60ZWX013-J1 Planetary Reduction Brushless DC Motor

2026-4-29 10:05:38

J60ZWX013-J1 planetary reduction brushless DC motor

[DC deceleration motor]J60ZWX010-Z1-J1,J60ZWX011-Z1-J1 Brushless DC motor set with braking deceleration

2026-4-29 10:05:36

J60ZWX010-Z1-J1, J60ZWX011-Z1-J1 brushless DC motor set with brake deceleration

[DC deceleration motor]J60ZWX008-J1 Planetary Reduction Brushless DC Motor

2026-4-29 10:05:33

J60ZWX008-J1 planetary reduction brushless DC motor

[DC deceleration motor]J60ZWX005-Z1-J1,J60ZWX006-Z1-J1 Brushless DC motor set with braking deceleration

2026-4-29 10:05:31

J60ZWX005-Z1-J1, J60ZWX006-Z1-J1 brushless DC motor set with brake deceleration

[DC deceleration motor]J60ZWX003-Z1-J1,J60ZWX004-Z1-J1 Brushless DC motor set with braking deceleration

2026-4-29 10:05:29

J60ZWX003-Z1-J1, J60ZWX004-Z1-J1 brushless DC motor set with brake deceleration

[DC deceleration motor]J48ZWX002-Z1-J1 Brushless DC motor with braking deceleration

2026-4-29 10:05:26

J48ZWX002-Z1-J1 brushless DC motor with brake deceleration

[DC deceleration motor]J43ZWX001-J1 Planetary Reduction Brushless DC Motor

2026-4-29 10:05:24

J43ZWX001-J1 planetary reduction brushless DC motor

[DC deceleration motor]J41ZWX001-J1 Planetary Reduction Brushless DC Motor

2026-4-29 10:05:22

J41ZWX001-J1 planetary reduction brushless DC motor

[DC deceleration motor]57BL-YZ planetary gear DC reduction motor

2026-4-29 10:05:19

57BL-YZ planetary gear DC reduction motor

model	rated voltage	power	rated speed	rated torque	reduction ratio
57BL-YZ	24VDC	30W	30Rpm	10N.m	1:50

reduction ratio	L(mm)
5~10	fifty-three
15~100	seventy

[DC deceleration motor]ZYT40-JB series permanent magnet DC gear reduction motor

2026-4-29 10:05:12

ZYT40-JB series permanent magnet DC gear reduction motor parameters

model	power	voltage	current	speed	reduction ratio
	W	V	A	r/min
ZYT20-JB60	twenty	twelve twenty-four thirty-six	three point one one point five one	two thousand and five hundred	1:5��1:600
ZYT40-JB60	forty	twelve twenty-four thirty-six one hundred and ten two hundred and twenty	six three two point two zero point seven zero point three five	two thousand and five hundred	1:5��1:600
ZYT40-JB70	forty			two thousand and five hundred	1:5��1:610
ZYT40-JB80	forty			two thousand and five hundred	1:5��1:640

[DC deceleration motor]ZY-JB series permanent magnet DC gear reduction motor

2026-4-29 10:04:57

Technical parameters of ZY-JB series permanent magnet DC gear reduction motor

model	D	L	reduction ratio
Type	mm	mm	Gear redution ratio
ZY2-ZB41	twenty-four point four	twenty-six	1:20��1:500
ZY3-JB41	twenty-four point four	thirty-one	1:20��1:500
ZY4-JB37	twenty-eight	forty-nine	1:10��1:300
ZY6-JB37	thirty-five	fifty-five	1:10��1:300
ZY8-JB37	thirty-five	sixty-five	1:10��1:300
ZY10-JB37	thirty-six	seventy-seven	1:10��1:300
ZY15-JB37	thirty-six	eighty-three	1:10��1:300

model	power	voltage	no-load speed	No load current	rated torque	Rated speed	rated current
Type	Power	Voltage	Noload speed	Noload current	Rated torque	Rated speed	Rated current
	W	V	r/min	mA	mN.m(g.cm)	r/min	mA
ZY2-JB41	two	three	five thousand and eight hundred	forty	0.39(4)	four thousand and seven hundred	one hundred and twenty-four
ZY3-JB41	three	three	five thousand and eight hundred	seventy	0.59(6)	four thousand and six hundred	two hundred and ten
ZY4-JB37	four	three	five thousand and eight hundred	seventy	0.98(10)	four thousand five hundred and eighty	two hundred and seventy
ZY6-JB37	six	twelve	five thousand	forty	1.96(20)	four thousand and three hundred	two hundred
ZY8-JB37	eight	twelve	five thousand	fifty	1.96(20)	four thousand and six hundred	two hundred and forty
ZY10-JB37	ten	twelve	four thousand	one hundred and fifty	9.81(100)	four thousand and one hundred	six hundred and thirty
ZY15-JB37	fifteen	twelve	five thousand and five hundred	one hundred	9.81(100)	four thousand and nine hundred	seven hundred
ZY15-JB37	fifteen	twenty-four	five thousand	one hundred	9.81(100)	four thousand and six hundred	three hundred and twenty

[DC deceleration motor]GK series square box gear DC reduction motor

2026-4-29 10:04:17

GK series square box gear DC reduction motor

The meaning of the model of gear reducer

This series of deceleration motors is composed of GK series square box gears coupled with a series of DC motors. Made with high-precision processing equipment and sophisticated craftsmanship. It has the characteristics of low noise and smooth operation, with a reduction ratio of 3-300, and can be matched with different power motors to achieve ideal output torque.
This series of products is suitable for continuous operation of working machinery, such as production lines, automatic machine tools, printing machinery, and can also be used in situations with frequent start stop or phantom operation. Such as vending machines, packaging machines, voltage regulators, and electric elevators.
Please refer to the ZTY series permanent magnet DC motor for technical parameters of the motor; SZ series DC servo motor.
working environment
Environmental temperature: -10-+55 ��
Relative humidity �� 95% (at 25 ��)
Storage environment requirements
Environmental humidity: -5 �� -+35 ��
Relative humidity �� 70% (at 25 ��)
Good ventilation, no corrosive odor in the air

Motor dimension diagram

GK series square box gear DC reduction motor

[DC deceleration motor]JZD series AC/DC dual-purpose series excited motor

2026-4-29 10:04:10

The JZD series AC and DC dual-purpose series excited motors can operate in either DC or AC networks. Mainly suitable for bank note bundling machines and household appliances, it can also be used as a speed regulating motor.

Technical data of JZD series AC/DC dual-purpose series excited motor:

model	power supply			output power (W)	rated speed (r/min)	Overall dimensions (mm)
	communication		DC voltage
	voltage	frequency
JZD-22	two hundred and twenty	fifty	two hundred and twenty	two hundred	eleven thousand	78×127
JZD-23	two hundred and twenty	fifty	two hundred and twenty	three hundred	eleven thousand	78×127

JZD-24	two hundred and twenty	fifty	two hundred and twenty	five hundred	eleven thousand	105×188
JZD-25	two hundred and twenty	fifty	two hundred and twenty	one thousand	eleven thousand	105×223

[DC deceleration motor]JZD2 series AC/DC dual-purpose series excited motor

2026-4-29 10:03:55

The JZD2 series AC/DC dual-purpose series excited motor can operate in DC or AC networks, mainly suitable for executive components in office automation equipment, household appliances, speed control circuits, and other mechanisms.

Technical data of JZD2 series AC/DC dual-purpose series excited motor:

model	voltage			Output power (W)	Speed (r/min)
	communication		direct current
	Voltage (V)	Frequency (Hz)	Voltage (V)
JZD2-110	one hundred and ten	fifty	one hundred and ten	seventy-five	eight thousand
JZD2-220	two hundred and twenty	fifty	two hundred and twenty	seventy-five	eight thousand

[DC deceleration motor]ZSD series permanent magnet DC reduction motor

2026-4-29 10:03:47

The ZSD series permanent magnet DC deceleration motor is mainly equipped with CT17 and CT19 circuit breaker spring mechanisms, electric flagpoles, and DC deceleration, with the characteristics of small size and large torque.

ZSD series permanent magnet DC reduction motor technical data:

model	Rated voltage (V)	Rated power (W)	Rated current (A)	Rated speed (r/min)
ZSD110-015	one hundred and ten	seventy	one point five	fifteen
ZSD220-015	two hundred and twenty	seventy	zero point eight	fifteen
ZSD110-130	one hundred and ten	seventy	one point five	one hundred and thirty
ZSD220-130	two hundred and twenty	seventy	zero point eight	one hundred and thirty

[DC deceleration motor]15-120W Adjustable speed micro gear reduction motor with brake

2026-4-29 10:03:37

Adjustable speed micro gear reduction motor with brake:

Principle/Structure of 15-120W Adjustable Speed Micro Gear Reduction Motor with Brake:
�� Equipped with a speedometer for speed feedback.
�� Equipped with a power-off electromagnetic brake.
�� Equipped with electronic speed controllers to achieve closed-loop speed control.
�� Turn off the power supply of the electronic speed controller, release the brake armature, and the spring will reset the armature and press the friction disc tightly. The motor shaft is held by the friction disc, and the brake maintains the load.

Features/Applications of 15-120W Adjustable Speed Micro Gear Reduction Motor with Brake:
�� Wide speed range:
50HZ:90-1400r/min
60HZ:90-1600r/min
�� It can achieve speed regulation, slow acceleration, slow deceleration, and electromagnetic braking functions.
�� Brake immediately upon power failure to maintain load.

[DC deceleration motor]24-2200W Straight axis double curved surface reduction motor

2026-4-29 10:03:28

Characteristics of 24-2200W orthogonal axis double curved surface reduction motor:

1. Small backlash: The backlash is very small, which can achieve stable optimal load balance.
2. Compact structure: Three curved plates are used to distribute the load, making the structure more compact.
3. High speed shaft support type: The high-speed shaft is supported by bearings, so there is no need to add parts to meet the requirements of radial load specifications.
4. Low vibration: Three curved plates achieve optimal load balance. This stable performance greatly reduces vibration.
5. Good rigidity: Due to the increase in the number of output pins and the dispersion of the load, the rigidity has been improved.
6. High efficiency: The rolling contact mechanism and optimal load balance improve efficiency.
7. Long service life: The tooth profile with a continuous curve has a large number of simultaneous meshing, resistance to impact force, and high carbon chromium bearing steel with excellent wear resistance and fatigue resistance is used in the main reduction mechanism, which can extend the service life.
8. Easy to maintain: The deceleration part can be separated from the output side flange, making maintenance very convenient.
9. Good assembly: Because it is sealed with lubricating grease, it can be directly assembled onto the device.

Installation form of 24-2200W orthogonal axis double curved reduction motor:
1. Foot installation, shaft output or hole output;
2. Flange installation, shaft output or hole output;
3. Side screw hole installation, shaft output or hole output.

Motor power: 24W, 40W, 60W, 90W, 100W, 120W, 200W, 400W, 750W, 1500W, 2200W
Voltage: three-phase or single-phase, 220V/380V, 50HZ/60HZ
Can be equipped with brakes or speed controllers
Reduction ratio: 1/5-1/240

[DC deceleration motor]92BLZ Gear DC Reduction Motor

2026-4-29 10:03:19

model	rated voltage	power	rated speed	rated torque	weight
92BLZ	24VDC	60W	5Rpm	15N.m	3.3Kg

Note: Adjusting the motor design can create multiple specifications for different speeds and powers. If the motor used by the user does not match the above standard specifications, the motor design can be adjusted in a timely manner according to the user's requirements.

reduction ratio	L(mm)
3~12.5	forty-five
15~180	sixty

92BLZ Gear DC Reduction Motor

[DC deceleration motor]SZJ series miniature DC servo gear reduction motor

2026-4-29 10:03:10

SZJ series miniature DC servo gear reduction motor

[DC deceleration motor]KE87-60 Worm gear reduction motor

2026-4-29 10:03:08

KE87-60 worm gear reduction motor

Motor type KE87-60
Product Type
Rated voltage DC 220
Rated current 2.2
Rated torque 0.76
Rated speed 4000
Rated power 320
Unit time s2 1min

Application and characteristics of KE87-60 worm gear reduction motor

Specification Model	Rated voltage (V)	Rated current (A)	Rated power (W)	Rated speed (r/min)	Rated torque (N.m)	Work schedule (1 minute)
00-5557-03	DC 220	two point two	three hundred and twenty	four thousand	zero point seven six	S2 1min

[DC deceleration motor]MC102C Worm gear reduction motor

2026-4-29 10:02:58

MC102C worm gear reduction motor

Rated voltage DC 12, DC 12
Rated current 10.8/17.8
Rated torque 2.39/4.25
Rated speed 200180
Rated power 50,80
Unit time s2 1min
Application and characteristics for automatic lifting of maintenance and repair support frames for off-road engineering vehicles and heavy-duty trucks

Specification Model	Rated voltage (V)	Rated current (A)	Rated power (W)	Rated speed (r/min)	Rated torque (N.m)	Work schedule (1 minute)
MC102C	DC 12	ten point eight	fifty	two hundred	two point three nine	S2 1min
MC102C	DC 12	seventeen point eight	eighty	one hundred and eighty	four point two five	S2 1min

MC102C worm gear reduction motor

[DC deceleration motor]MC193C Worm gear reduction motor

2026-4-29 10:02:48

MC193C worm gear reduction motor

Motor type MC193C
Product Type
Rated voltage DC 12
Rated current 14
Rated torque 15.93
Rated speed 30
Rated power 50
Unit time s2 1min

Application and Characteristics of MC193C Worm Gear Reduction Motor

[DC deceleration motor]MC193C-1 Worm gear reduction motor

2026-4-29 10:02:42

MC193C-1 Worm Gear Reduction Motor

Motor type MC193C-1
Product Type
Rated voltage DC 12
Rated current 8
Rated torque 6.5
Rated speed 37
Rated power 25
Unit time s2 1min

Application and Features

[DC deceleration motor]MC193C-2 Worm gear reduction motor

2026-4-29 10:02:37

MC193C-2 Worm Gear Reduction Motor

Motor type MC193C-2
Product Type
Rated voltage DC 12
Rated current 4.2
Rated torque 3.4
Rated speed 34
Rated power 12
Unit time s2 1min

Application and Characteristics of MC193C-2 Worm Gear Reduction Motor

[DC deceleration motor]00-5550-06 Worm gear reduction motor

2026-4-29 10:02:32

00-5550-06 Worm Gear Reduction Motor

Motor type 00-5550-06
Product Type
Rated voltage AC 380V
Rated current 3.5
Rated torque 1.7
Rated speed 2800
Rated power 500
Unit time s2 1min

Application and characteristics of 00-5550-06 worm gear reduction motor

[DC deceleration motor]00-5555-24 Worm gear reduction motor

2026-4-29 10:02:28

00-5555-24 Worm Gear Reduction Motor

Motor type 00-5555-24
Product Type
Rated voltage AC 380V
Rated current 3.9
Rated torque 4.2
Rated speed 2800
Rated power 1200
Unit time s2 1min
Application and Features

[DC deceleration motor]00-5555-35 Worm gear reduction motor

2026-4-29 10:02:23

00-5555-35 Worm Gear Reduction Motor

Motor type 00-5555-35
Product Type
Rated voltage AC 380V
Rated current 3.4
Rated torque 1.7
Rated speed 2800
Rated power 500
Unit time s2 1min

Application and Features

[DC deceleration motor]00-5550-15 Worm gear reduction motor

2026-4-29 10:02:19

00-5550-15 Worm Gear Reduction Motor Motor Type 00-5550-15

Product Type
Rated voltage AC 220
Rated current 6.6
Rated torque 1.30
Rated speed 4000
Rated power 550
Unit time s2 1min

Application and Features

[DC deceleration motor]WG.V.003 Gear reduction motor

2026-4-29 10:02:14

WG.V.003 Gear Reduction Motor

Motor type WG.V.003
Product Type
Rated voltage DC 220, DC 110, DC 48
Rated current 0.90/1.80/3.70
Rated torque 71.70
Rated speed 12
Rated power 90
Unit time s2 1min

Application and Characteristics of WG.V.003 Gear Reduction Motor

Specification Model	Rated voltage (V)	Rated current (A)	Rated power (W)	Rated speed (r/min)	Rated torque (N.m)	Work schedule (1 minute)
66ZY-CJ02	DC 220	zero point nine zero	ninety	twelve	seventy-one point seven zero	S2 1min
66ZY-CJ01	DC 110	one point eight zero	ninety	twelve	seventy-one point seven zero	S2 1min
66ZY-CJ004	DC 48	three point seven zero	ninety	twelve	seventy-one point seven zero	S2 1min

[DC deceleration motor]64ZY-CJ-8 Gear reduction motor

2026-4-29 10:02:01

64ZY-CJ-8 gear reduction motor

Motor type 64ZY-CJ-8
Product Type
Rated voltage DC 220, DC 110, DC 48, DC 24
Rated current 0.60/1.20/2.80/5.50
Rated torque 3.80
Rated speed 150
Rated power 60
Unit time s2 1min

Application and Characteristics of 64ZY-CJ-8 Gear Reduction Motor

Specification Model	Rated voltage (V)	Rated current (A)	Rated power (W)	Rated speed (r/min)	Rated torque (N.m)	Work schedule (1 minute)
64ZY-CJ02-8	DC 220	zero point six zero	sixty	one hundred and fifty	three point eight zero	S2 1min
64ZY-CJ01-8	DC 110	one point two zero	sixty	one hundred and fifty	three point eight zero	S2 1min
64ZY-CJ004-8	DC 48	two point six zero	sixty	one hundred and fifty	three point eight zero	S2 1min
64ZY-CJ002-8	DC 24	five point five zero	sixty	one hundred and fifty	three point eight zero	S2 1min

[DC deceleration motor]66ZY-CJ-1-DN Gear reduction motor

2026-4-29 10:01:46

66ZY-CJ-1-DN gear reduction motor

Motor type 66ZY-CJ-1-DN
Product Type
Rated voltage DC 220, DC 110, DC 48, DC 24
Rated current 0.70/1.40/3.20/6.40
Rated torque 39.40
Rated speed 17
Rated power 70
Unit time s2 1min
Application and Features

Specification Model	Rated voltage (V)	Rated current (A)	Rated power (W)	Rated speed (r/min)	Rated torque (N.m)	Work schedule (1 minute)
66ZY-CJ02-1-DN	DC 220	zero point seven zero	seventy	seventeen	thirty-nine point four zero	S2 1min
66ZY-CJ01-1-DN	DC 110	one point four zero	seventy	seventeen	thirty-nine point four zero	S2 1min
66ZY-CJ004-1-DN	DC 48	three point two zero	seventy	seventeen	thirty-nine point four zero	S2 1min
66ZY-CJ002-1-DN	DC 24	six point four zero	seventy	seventeen	thirty-nine point four zero	S2 1min

66ZY-CJ-1-DN gear reduction motor

[DC deceleration motor]66ZY-CJ-WA series gear reduction motor

2026-4-29 10:01:30

66ZY-CJ-WA series gear reduction motor

Motor type 66ZY-CJ-WA
Product Type
Rated voltage DC 220, DC 110, DC 48, DC 24
Rated current 0.52/1.04/2.40/4.80
Rated torque 65.70
Rated speed 8
Rated power 55
Unit time s2 1min

Application and Characteristics of 66ZY-CJ-WA Series Gear Reduction Motor Stainless Steel Shaft

Specification Model	Rated voltage (V)	Rated current (A)	Rated power (W)	Rated speed (r/min)	Rated torque (N.m)	Work schedule (1 minute)
66ZY-CJ02-WA	DC 220	zero point five two	fifty-five	eight	sixty-five point seven zero	S2 1min
66ZY-CJ01-WA	DC 110	one point zero four	fifty-five	eight	sixty-five point seven zero	S2 1min
66ZY-CJ004-WA	DC 48	two point four zero	fifty-five	eight	sixty-five point seven zero	S2 1min
66ZY-CJ002-WA	DC 24	four point eight zero	fifty-five	eight	sixty-five point seven zero	S2 1min

[DC deceleration motor]66ZY-CJ-5 series gear reduction motor

2026-4-29 10:01:12

66ZY-CJ-5 series gear reduction motor

Motor type 66ZY-CJ-5
Product Type
Rated voltage DC 220, DC 110, DC 48, DC 24
Rated current 1.20/2.40/5.50/11
Rated torque 67.50
Rated speed 17
Rated power 120
Unit time s2 1min
Application and Features

Specification Model	Rated voltage (V)	Rated current (A)	Rated power (W)	Rated speed (r/min)	Rated torque (N.m)	Work schedule (1 minute)
66ZY-CJ22-5	DC 220	two point six zero	two hundred and eighty	one thousand	two point seven zero	S2 1min
66ZY-CJ21-5	DC 110	four point eight zero	two hundred and eighty	one thousand	two point seven zero	S2 1min

[DC deceleration motor]66ZY-CJ-5(1) series gear reduction motor

2026-4-29 10:01:01

66ZY-CJ-5 (1) series gear reduction motor

Motor type 66ZY-CJ-5 (1)

Product Type
Rated voltage DC 220, DC 110
Rated current 2.60/4.80
Rated torque 2.70
Rated speed 1000
Rated power 280
Unit time s2 1min

Application and Characteristics of 66ZY-CJ-5 (1) Series Gear Reduction Motor

Specification Model	Rated voltage (V)	rated current ��A��	Rated power (W)	Rated speed (r/min)	Rated torque (N.m)	Work schedule (1 minute)
66ZY-CJ12-5	DC 220	one point two zero	one hundred and twenty	seventeen	sixty-seven point five zero	S2 1min
66ZY-CJ11-5	DC 110	two point four zero	one hundred and twenty	seventeen	sixty-seven point five zero	S2 1min
66ZY-CJ104-5	DC 48	five point five zero	one hundred and twenty	seventeen	sixty-seven point five zero	S2 1min
66ZY-CJ102-5	DC 24	eleven	one hundred and twenty	seventeen	sixty-seven point five zero	S2 1min

[DC deceleration motor]66ZY-CJ-A series gear reduction motor

2026-4-29 10:00:46

Motor type 66ZY-CJ-A

66ZY-CJ-A series gear reduction motor type

Rated voltage DC 220, DC 110, DC 220, DC 110
Rated current 1.50/3.00/1.20/2.40
Rated torque 90.00/90.00/67.50/67.50
Rated speed 17
Rated power 160
Unit time s2 1min
Application and Features

Specification Model	Rated voltage (V)	Rated current (A)	Rated power (W)	Rated speed (r/min)	Rated torque (N.m)	Work schedule (1 minute)
66ZY-CJ22-A	DC 220	one point five zero	one hundred and sixty	seventeen	ninety	S2 1min
66ZY-CJ21-A	DC 110	three	one hundred and sixty	seventeen	ninety	S2 1min
66ZY-CJ12	DC 220	one point two zero	one hundred and twenty	seventeen	sixty-seven point five zero	S2 1min
66ZY-CJ11	DC 110	two point four zero	one hundred and twenty	seventeen	sixty-seven point five zero	S2 1min

[DC deceleration motor]67C-7515H Gear reduction motor

2026-4-29 10:00:31

67C-7515H gear reduction motor

Motor type 67C 7515 H
Rated voltage DC 220, DC 110, DC 220, DC 110
Rated current 0.80/1.60/1.20/2.40
Rated torque 5.70/5.70/7.40/7.40
Rated speed 155
Rated power 90
Unit time s2 1min
Application and Features

Specification Model	Rated voltage (V)	Rated current (A)	Rated power (W)	Rated speed (r/min)	Rated torque (N.m)	Work schedule (1 minute)
67C 7515 H02	DC 220	zero point eight zero	ninety	one hundred and fifty-five	five point seven zero	S2 1min
67C 7515 H01	DC 110	one point six zero	ninety	one hundred and fifty-five	five point seven zero	S2 1min
67C 7515 H12	DC 220	one point two zero	one hundred and twenty	one hundred and fifty-five	seven point four zero	S2 1min
67C 7515 H11	DC 110	two point four zero	one hundred and twenty	one hundred and fifty-five	seven point four zero	S2 1min

67C-7515H gear reduction motor

[DC deceleration motor]K0128B500 Gear reduction motor

2026-4-29 10:00:15

K0128B500 gear reduction motor

Motor type K0128B500
Rated voltage DC 12
Rated current 7.0
Rated torque 47.80
Rated speed 10
Rated power 50
Unit time s2 1min
Application and Features

[DC deceleration motor]K128500 Gear reduction motor

2026-4-29 10:00:11

Motor type K128500

Product Type
Rated voltage DC 12
Rated current 7.0
Rated torque 47.80
Rated speed 10
Rated power 50
Unit time s2 1min
Application and Features

K128500 gear reduction motor

[DC deceleration motor]MC193C-3 Gear reduction motor

2026-4-29 10:00:06

MC193C-3 gear reduction motor

Type MC193C-3

Rated voltage DC 12
Rated current 14
Rated torque 27.31
Rated speed 14
Rated power 40
Unit time s2 1min
Application and Features

[DC deceleration motor]MC193C-4 Gear reduction motor

2026-4-29 10:00:02

Motor type MC193C-4
Product Type
Rated voltage DC 12
Rated current 16
Rated torque 31.87
Rated speed 12
Rated power 40
Unit time s2 1min
Application and Features

MC193C-4 gear reduction motor

[DC deceleration motor]1B92770H11 Gear reduction motor

2026-4-29 9:59:57

1B92770H11 gear reduction motor

Rated voltage AC/DC 110, AC/DC 220, DC 24, DC 48
Rated current 1.60/0.80/7.40/3.70
Rated torque 7.60
Rated speed 100
Rated power 80
Unit time s2 1min

Application and Characteristics of 1B92770H11 Gear Reduction Motor

Specification Model	Rated voltage (V)	rated current ��A��	Rated power (W)	Rated speed (r/min)	Rated torque (N.m)	Work schedule (1 minute)
1B92770H11	AC/DC 110	one point six zero	eighty	one hundred	seven point six zero	S2 1min
1B92770H12	AC/DC 220	zero point eight zero	eighty	one hundred	seven point six zero	S2 1min
1B92770H16	DC 24	seven point four zero	eighty	one hundred	seven point six zero	S2 1min
1B92770H17	DC 48	three point seven zero	eighty	one hundred	seven point six zero	S2 1min

[DC deceleration motor]NFX0035H01 Gear reduction motor

2026-4-29 9:59:40

NFX0035H01 Gear Reduction Motor

Motor type NFX0035H01
Product Type
Rated voltage AC/DC 110
Rated current 3
Rated torque 1.53
Rated speed 500
Rated power 80
Unit time s2 1min

Application and Features

[DC deceleration motor]J-PX series miniature planetary reduction motor

2026-4-29 9:59:35

The J-PX series miniature planetary reduction motor consists of SZ (ZYT) series DC motor and PX type ordinary precision planetary reducer, and is equipped with a power supply, which can achieve stepless speed regulation Wide adjustment range, small size, light weight, high efficiency, compact structure, high output torque, widely used in imported equipment and domestic machinery For example: four-color printing machine Plastic flat sealing machine Food and industrial packaging machinery Thermal insulation detection device for oil pipelines Welding equipment and other equipment that require low speed and high torque Inorganic speed regulating drive device The power supply used adopts pulse width modulation technology and has advanced short-circuit protection function. It outputs a continuously adjustable DC regulated power supply with a voltage range of 0-220V, which enables the motor speed to be infinitely variable

[DC deceleration motor]449D431H21 type gear reduction motor

2026-4-29 9:59:32

Specification Model	Rated voltage (V)	Rated current (A)	rated power ��W��	Rated speed (r/min)	Rated torque (N.m)	Work schedule (1 minute)
449D431 H21	AC/DC 110	three	eighty	five hundred	one point five three	S2 1min
449D431 H22	AC/DC 220	one point five zero	eighty	five hundred	one point five three	S2 1min
449D431 H23	DC 48	six point eight eight	eighty	five hundred	one point five three	S2 1min
449D431 H27	DC 24	thirteen point eight zero	eighty	five hundred	one point five three	S2 1min

449D431H21 type gear reduction motor

[DC deceleration motor]592C585-H02 Gear reduction motor

2026-4-29 9:59:20

592C585-H02 gear reduction motor

Motor type 592C585 H02

Product Type
Rated voltage AC/DC 120
Rated current 4
Rated torque 3.82
Rated speed 500
Rated power 200
Unit time s2 1min

[DC deceleration motor]J-SZ(ZYT)-PX series miniature DC deceleration motor

2026-4-29 9:59:15

summary:
The J-SZ (ZYT) - PX series miniature DC reduction motors are composed of SZ (ZYT) series DC motors and PX type precision planetary reducers, respectively, and are equipped with power supply, which can achieve stepless speed regulation. Wide adjustment range, small size, light weight, high efficiency, compact structure, large output torque, widely used in imported equipment and domestic machinery. For example, four-color printing machines, plastic sealing machines, food and industrial packaging machinery, oil pipeline insulation detection devices, welding equipment, and other driving devices that require low speed, high torque, and stepless speed regulation. The power supply used adopts pulse width modulation technology, with advanced short-circuit protection function, outputting 0~220V continuously adjustable DC stabilized power supply, which enables the motor speed to achieve stepless speed change and other advantages.

[DC deceleration motor]80ZYJ-C DC gear reduction motor

2026-4-29 9:59:12

Detailed parameters of 80ZYJ-C DC gear reduction motor

Model (MODRL)	Voltage (V) (VOLTAGE)	Torque (N · M) (TORQUE)	Current (A) (CURRENT)	Speed (rpm) (SPEEO)	Axial extension length (rpm) (LENGTH)	Power (W)
80ZYJ-C	twelve	thirteen point two	thirty	75± 10%	seventy-five	two hundred and ten

Outline drawing and installation dimensions of 80ZYJ-C DC gear reduction motor

[DC deceleration motor]80ZYJ-W DC worm gear reduction motor

2026-4-29 9:59:05

Detailed parameters of 80ZYJ-W DC worm gear reduction motor

Model (MODRL)	Voltage (V) (VOLTAGE)	Torque (N · M) (TORQUE)	Current (A) (CURRENT)	Speed (rpm) (SPEEO)	Ratio (Ratio)	Axial extension length (mm) (LENGTH)	Power (W)
80ZYJ-W	twelve	thirteen point two	thirty	76 ± 10%	59:1	thirty-three point five	two hundred and forty

Outline drawing and installation dimensions of 80ZYJ-W DC worm gear reduction motor

[DC deceleration motor]63ZYJX DC worm gear reduction motor

2026-4-29 9:58:57

Detailed parameters of 63ZYJX DC worm gear reduction motor

model ��MODRL��	rated voltage ��V��	rated current ��A��	single motor			Deceleration motor
model ��MODRL��	rated voltage ��V��	rated current ��A��	torque ��mNm��	speed r/min	power W	torque ��Nm��	speed r/min	power W
63ZYJX	twenty-four	two point five	one hundred and thirty	3000±10%	forty	two point three	83±10%	twenty
63ZYJX	twenty-four	five point five	two hundred and forty	3400±10%	eighty-five	four point three	94±10%	forty-three

Outline drawing and installation dimensions of 63ZYJX DC worm gear reduction motor

[DC deceleration motor]90ZYJ08 DC worm gear reduction motor

2026-4-29 9:58:44

Detailed parameters of 90ZYJ08 DC worm gear reduction motor

Model (MODRL)	Voltage (V) (VOLTAGE)	Torque (N · M) (TORQUE)	Current (A) (CURRENT)	Speed (rpm) (SPEEO)	Ratio (Ratio)	Power (W)
90ZYJ08	twelve	twenty-two point five	fifty	75 ± 10%	50:1	three hundred and fifty

Outline drawing and installation dimensions of 90ZYJ08 DC worm gear reduction motor

[DC deceleration motor]63ZYJ DC worm gear reduction motor

2026-4-29 9:58:36

model	rated voltage ��V��	rated current ��A��	single motor			Deceleration motor
model	rated voltage ��V��	rated current ��A��	torque ��mNm��	speed r/min	power W	torque ��Nm��	speed r/min	power W
63ZYJ12-40-1	twelve	five	one hundred and thirty	3000±10%	forty	two point three	83±10%	twenty
63ZYJ12-85-1	twelve	eleven	two hundred and forty	3400±10%	eighty-five	four point three	94±10%	forty-three
63ZYJ24-40-1	twenty-four	two point five	one hundred and thirty	3000±10%	forty	two point three	83±10%	twenty
63ZYJ24-85-1	twenty-four	five point five	two hundred and forty	3400±10%	eighty-five	four point three	94±10%	forty-three
63ZYJ30-100-1	thirty	five	two hundred and eighty	3000±10%	one hundred	two point one	200±10%	fifty
63ZYJ60-100-1	sixty	two point five	two hundred and eighty	3000±10%	one hundred	one	430±10%	fifty

63ZYJ DC worm gear reduction motor

[DC deceleration motor]73ZYJ-AS DC worm gear reduction motor

2026-4-29 9:58:11

73ZYJ-AS DC worm gear reduction motor

Model (MODRL)	Voltage (V) ��VOLTAGE��	Torque (N · M) (TORQUE)	Current (A) ��CURRENT��	Speed (rpm) (SPEEO)	Ratio (Ratio)	Motor power (W) (Power)
73ZYJ-AS	forty-eight	seven	four	88± 10%	25:1	sixty-five
73ZYJ-AS	forty-eight	eleven	four	55± 10%	40:1	sixty-five

73ZYJ-AS DC worm gear reduction motor

[DC deceleration motor]76ZYJ DC worm gear reduction motor

2026-4-29 9:57:59

Model (MODRL)	Voltage (V) (VOLTAGE)	Torque (N · M) (TORQUE)	Current (A) (CURRENT)	Speed (rpm) (SPEEO)	Ratio (Ratio)	Motor power (W) (Power)
76ZYJ	twenty-four	eight point four	five	45 ± 10%	57:1	forty

76ZYJ DC worm gear reduction motor

[DC deceleration motor]DCG3F series DC flange helical gear reduction motor

2026-4-29 9:57:52

DCG3F series DC flange helical gear reduction motor

[DC deceleration motor]DCG3L series DC horizontal helical gear reduction motor

2026-4-29 9:57:49

DCG3L series DC horizontal helical gear reduction motor

[DC deceleration motor]ZLC300/400 series DC reduction motor

2026-4-29 9:57:47

Model: h12-1000-77S Rated voltage: 48V

Output power: 100W
Output torque: 200N. M Output speed:>500r/min
Working current:<30A

Technical data of ZLC300/400 series DC reduction motor

model	power W	voltage V	current A	speed r/min	torque N.m	reduction ratio
ZLC300-71S-A	three hundred	twenty-four	seventeen point five	three thousand and two hundred	zero point nine one	5.4:1
ZLC400-71S-A	four hundred	thirty-six	fifteen point nine	three thousand and two hundred	one point two two	5.4:1
ZLC600-71S	six hundred	sixty	thirteen point three	three thousand and two hundred	one point eight two	5.4:1
ZLC600-71S-A	six hundred	forty-eight	sixteen point eight	three thousand and two hundred	one point eight two	5.4:1
ZLC800-81S	eight hundred	forty-eight	twenty-two point two	three thousand and two hundred	two point four three	5.4:1
ZLC1000-100S	one thousand	forty-eight	twenty-eight	three thousand and two hundred	three point zero four	5.4:1
ZLC800-81S-A	eight hundred	sixty	sixteen point five	three thousand and two hundred	two point four three	5.4:1
122ZYT001	one thousand	forty-eight	twenty-eight	six hundred and eighty	fourteen point three two	5.4:1

ZLC300/400 series DC reduction motor

[DC deceleration motor]87ZYJ001 type DC reduction motor

2026-4-29 9:57:23

Technical Data of 87ZYJ001 DC Reduction Motor

model TYPE	voltage V	rated current A	No load current A	rated speed r/min	no-load speed r/min	Rated torque Kg.cm/N.M		reduction ratio i
87ZYJ001	twelve	<10	<5.5	20+/-15%	22+/-15%		ten	one hundred and twenty

*The products listed in the above table are only representative, and this motor has a larger adjustable torque

Outline drawing of 87ZYJ001 DC reduction motor

[DC deceleration motor]42ZYJ001 type DC reduction motor

2026-4-29 9:57:13

Technical Data of 42ZYJ001 DC Reduction Motor

model	voltage V	no-load speed r/min	No load current A	rated torque		rated speed r/min	rated current A	reduction ratio i	rotation direction
				N.m	Kg.cn				CW/CCW
42ZYJ001	twenty-four	550±15%	�� 0.7	zero point two nine four	three	350±15%	��1.5	1/5.18	CW

[DC deceleration motor]40ZYC series DC reduction motor

2026-4-29 9:56:59

Technical data of 40ZYC series DC reduction motor

model TYPE	voltage V DC	current mA	speed r/min	torque N.m	steering
Model	Voltage (V)	Current	Rotational speed	Rotational torque	Change direction
40ZYC001	twelve	��0.4	five	zero point five	CW,CCW
The products listed in the above table are representative.

*The products listed in the above table are only representative.

Outline drawing

[DC deceleration motor]38ZYC DC gear reduction motor

2026-4-29 9:56:49

The 38ZYC DC gear reduction motor is a small DC motor with a gear reducer, which has the advantages of small size, light weight, low noise, long service life, large output torque, wide speed adjustment range, and good servo performance. Therefore, it is widely used in instrumentation, automation control, bank cash counting machines, stage lighting, advertising and exhibition equipment, monitors, various valves, medical instruments, scientific research facilities, sports equipment, curtain automatic control, soft towel machines, automotive motors, automatic voltage regulators, building water and electricity control systems, and other occasions.

Technical data of 38ZYC DC gear reduction motor

Output shaft speed of gear motor	Gearbox gear ratio	Motor speed (r/min)	Rated output torque of motor (fg. cm)
fifteen	one hundred and sixty-seven	two thousand and five hundred	four thousand one hundred and seventy-five
twenty	one hundred and fifty	three thousand	three thousand seven hundred and fifty
thirty-five	one hundred	three thousand and five hundred	two thousand and five hundred
forty	ninety	three thousand and six hundred	two thousand two hundred and fifty
sixty	fifty	three thousand	one thousand two hundred and fifty
one hundred	thirty	three thousand	seven hundred and fifty
one hundred and twenty-five	thirty	three thousand seven hundred and fifty	seven hundred and fifty

Note: The motor can be customized according to the user: the speed is 1.6~460r/min, and the corresponding torque is 6000~150gf.cm

38ZYC DC gear reduction motor appearance

[DC deceleration motor]35ZYC series DC reduction motor

2026-4-29 9:56:35

Technical data of 35ZYC series DC reduction motor

model TYPE	voltage V DC	current mA	speed r/min	torque N.m	steering
Model	Voltage (V)	Current	Rotational speed	Rotational torque	Change direction
35ZYC001	six	��50	one hundred and fifty	zero point zero two	CW,CCW
35ZYC002	nine	��50	one hundred and ten	zero point zero two	CW
35ZYC003	twelve	��50	one hundred and ten	zero point zero two	CW

*The products listed in the above table are only representative.

Outline drawing of 35ZYC series DC deceleration motor

35ZYC series DC reduction motor

[DC deceleration motor]33ZYJ series DC reduction motor

2026-4-29 9:56:21

Technical data of 33ZYJ series DC reduction motor

model	voltage	rated current A	rated speed r/min	rated torque N.m	steering	Operating Temperature ��	Gear material	remark
Model	Voltage (V)	Amount Current	Amount Rotational speed	Amount torque	Change direction	Working temperature ��	Gear wheel material	Notes
33ZYJ001	three	zero point three six	1.5±0.1	one point five	CW,CCW	-20��80	powder metallurgy
33ZYJ012	twelve	zero point eight	9±0.1	zero point two five	CW,CCW	-20��80	powder metallurgy
Explanation: The output shaft speed can be adjusted as needed.

*The products listed in the above table are only representative.

Outline drawing of 33ZYJ series DC deceleration motor

33ZYJ series DC reduction motor

[DC deceleration motor]88JBX-88BLDC002 Brushless series planetary gearbox motor

2026-4-29 9:56:06

88JBX-88BLDC002 brushless series planetary gearbox motor detailed information

Reduction ratio Torque Kg. cm speed r Model number	1/4.3	1/6.75		1/18	1/29	1/35	rated voltage ��VDC��	No load current ��A��	load current ��A��
	thirty-five	sixty		one hundred and thirty	two hundred and ten	two hundred and fifty
88JBX-88BLDC045J1000	two hundred and thirty	one hundred and fifty		fifty-five	thirty-five	twenty-eight	twenty-four	��1.5	��7.5
88JBX-88BLDC045J2000	four hundred and sixty-five	two hundred and ninety		one hundred and ten	seventy	fifty-five	twenty-four	��2	��13
88JBX-88BLDC001J3000	seven hundred	four hundred and forty		one hundred and sixty-six	one hundred and three	eighty-four	twenty-four	��3	��19
88JBX-88BLDC045J4000	nine hundred and thirty	five hundred and eighty		two hundred and twenty	one hundred and thirty-eight	one hundred and ten	twenty-four	��4	��26
Reduction Ratio			L(mm)
1/4.3 1/6.75			one hundred and forty-five
1/18 1/29 1/35			one hundred and sixty-six

88JBX-88BLDC002 Brushless Series Planetary Reduction Motor Product Outline Drawing

[DC deceleration motor]56JBX-57ZYN series planetary reduction motor

2026-4-29 9:55:45

56JBX-57ZYN series planetary reduction motor

Reduction ratio Torque Kg. cm speed r Model number	1/4.3	1/6.75	1/18	1/29	1/35	rated voltage ��VDC��	No load current ��mA��	load current ��A��
Reduction ratio Torque Kg. cm speed r Model number	eleven	eighteen	forty	sixty-five	eighty	rated voltage ��VDC��	No load current ��mA��	load current ��A��
56JBX-57ZYN001J1000	two hundred and thirty	one hundred and fifty	fifty-five	thirty-five	twenty-eight	twenty-four	��300	��2.2
56JBX-57ZYN001J2000	four hundred and sixty-five	two hundred and ninety	one hundred and ten	seventy	fifty-five	twenty-four	��400	��3.7
56JBX-57ZYN001J3000	seven hundred	four hundred and forty	one hundred and sixty-six	one hundred and three	eighty-four	twenty-four	��500	��5.7
56JBX-57ZYN001J4000	nine hundred and thirty	five hundred and eighty	two hundred and twenty	one hundred and thirty-eight	one hundred and ten	twenty-four	��800	��7.8

Reduction ratio Torque Kg. cm speed r Model number	1/4.3	1/6.75	1/18	1/29	1/35	rated voltage ��VDC��	No load current ��mA��	load current ��A��
Reduction ratio Torque Kg. cm speed r Model number	seven	twelve	twenty-eight	forty-five	fifty-five	rated voltage ��VDC��	No load current ��mA��	load current ��A��
56JBX-57ZYN002J1000	one hundred and ninety	one hundred and fifty	fifty-five	thirty-five	twenty-eight	twenty-four	��300	��1.5
56JBX-57ZYN002J2000	two hundred and eighty	two hundred and twenty	one hundred and ten	seventy	forty-two	twenty-four	��400	��2.5
56JBX-57ZYN002J3000	three hundred and eighty	two hundred and ninety	one hundred and sixty-six	one hundred and three	fifty-five	twenty-four	��500	��3.8
56JBX-57ZYN002J4000	five hundred and seventy	four hundred and forty	two hundred and twenty	one hundred and thirty-eight	eighty-four	twenty-four	��800	��5.2

Reduction Ratio	L(mm)(57ZYN001)	L(mm)(57ZYN002)
1/4.3 1/6.75	one hundred and forty-three	one hundred and thirty-three
1/18 1/29 1/35	one hundred and sixty-two	one hundred and fifty-two

Product appearance diagram

[DC deceleration motor]56JBX-A57BLDC Brushless series planetary gearbox motor

2026-4-29 9:55:04

56JBX-A57BLDC brushless series planetary gearbox motor

Reduction ratio Torque Kg. cm speed r Model number	1/4.3	1/6.75	1/18	1/29	1/35	rated voltage ��VDC��	No load current ��mA��	load current ��A��
Reduction ratio Torque Kg. cm speed r Model number	five	eight	twenty	thirty	forty	rated voltage ��VDC��	No load current ��mA��	load current ��A��
56JBX-A57BLDC021J1000	two hundred and thirty	one hundred and fifty	fifty-five	thirty-five	twenty-eight	twenty-four	��300	��1.1
56JBX-A57BLDC021J2000	four hundred and sixty-five	two hundred and ninety	one hundred and ten	seventy	fifty-five	twenty-four	��400	��1.9
56JBX-A57 BLDC021J3000	seven hundred	four hundred and forty	one hundred and sixty-six	one hundred and three	eighty-four	twenty-four	��600	��2.8
56JBX-A57 BLDC021J4000	nine hundred and thirty	five hundred and eighty	two hundred and twenty	one hundred and thirty-eight	one hundred and ten	twenty-four	��800	��3.7

Reduction ratio Torque Kg. cm speed r Model number	1/4.3	1/6.75	1/18	1/29	1/35	rated voltage ��VDC��	No load current ��mA��	load current ��A��
Reduction ratio Torque Kg. cm speed r Model number	nine	fifteen	thirty-five	fifty	seventy	rated voltage ��VDC��	No load current ��mA��	load current ��A��
56JBX-A57BLDC041J1000	two hundred and thirty	one hundred and fifty	fifty-five	thirty-five	twenty-eight	twenty-four	��600	��2.2
56JBX-A57BLDC041J2000	four hundred and sixty-five	two hundred and ninety	one hundred and ten	seventy	fifty-five	twenty-four	��800	��4
56JBX-A57 BLDC041J3000	seven hundred	four hundred and forty	one hundred and sixty-six	one hundred and three	eighty-four	twenty-four	��1200	��5.6
56JBX-A57 BLDC041J4000	nine hundred and thirty	five hundred and eighty	two hundred and twenty	one hundred and thirty-eight	one hundred and ten	twenty-four	��1600	��7.5

Outline drawing of 56JBX-A57BLDC brushless series planetary gearbox motor

[DC deceleration motor]55JBX-55ZYN series planetary reduction motor

2026-4-29 9:54:27

55JBX-55ZYN series planetary reduction motor detailed information

Reduction ratio Torque Kg. cm speed r Model number	1/6	1/36	1/216	rated voltage ��VDC��	No load current ��mA��	load current ��A��
Reduction ratio Torque Kg. cm speed r Model number	five	twenty-five	one hundred and twenty-five	rated voltage ��VDC��	No load current ��mA��	load current ��A��
55JBX-55ZYN001J1000	one hundred and sixty-six	twenty-seven	four point five	twenty-four	��300	��1
55JBX-55ZYN001J1500	two hundred and fifty	forty-two	seven	twenty-four	��400	��1.2
55JBX-55ZYN001J2000	three hundred and thirty-three	fifty-five	nine	twenty-four	��500	��1.5
55JBX-55ZYN001J3000	five hundred	eighty-three	fourteen	twenty-four	��800	��2.4

reduction ratio Reduction Ratio	L (mm)
1/6	one hundred and ten
1/36	one hundred and twenty
1/216	one hundred and thirty

Product Outline Drawing

55JBX-55ZYN series planetary reduction motor

[DC deceleration motor]45JBX1296 series planetary reduction motor

2026-4-29 9:54:08

45JBX1296 series planetary reduction motor detailed information

Model number (Model)	Voltage (VDC)	current (A)	speed (r/min)	torque (Kg.cm)
45JBX1296 (12V)	twelve	one point six	three	one hundred
45JBX1296 (24V)	twenty-four	zero point eight	three	one hundred

Outline drawing of 45JBX1296 series planetary reduction motor product

[DC deceleration motor]1-030-028 series worm gear DC reduction motor

2026-4-29 9:53:59

1-030-028 series worm gear DC reduction motor detailed information

Model number	voltage	reduction ratio	Empty load		Rated data			peak torque	weight	fuselage Long L
	voltage		speed	current	speed	torque	current	peak torque	weight	fuselage Long L
	DC		rpm	A	rpm	N.m	A	N.m	Kg	mm
1-030-028F	thirty-six	8:1	four hundred	zero point eight	three hundred and fifty	one point five	three point four	eight	one point five	one hundred and sixty-three
1-030-028T	thirty-six	16:1	two hundred	zero point eight	one hundred and seventy-five	two point five	three point four	thirteen	one point five	one hundred and sixty-three
1-030-028O	thirty-six	32:1	one hundred	zero point eight	eighty-seven	four	three point four	twenty	one point five	one hundred and sixty-three

Outline drawing of 1-030-028 series worm gear DC reduction motor

[DC deceleration motor]DSM90 series worm gear DC reduction motor

2026-4-29 9:53:37

DSM90 series worm gear DC reduction motor data

Model number	voltage	Empty load		Rated data			peak torque	weight	fuselage Long L
	voltage	speed	current	speed	torque	power	peak torque	weight	fuselage Long L
	DC	rpm	A	rpm	N.m	W	N.m	Kg	mm
DSM90	twelve	thirty-eight	twenty	twenty-five	one hundred and thirty-five	one hundred and forty	two hundred	eight point five	three hundred and seventeen

Outline drawing of DSM90 series worm gear DC reduction motor

DSM90 series worm gear DC reduction motor

[DC deceleration motor]1-034-050 series worm gear DC reduction motor

2026-4-29 9:53:24

1-034-050 series worm gear DC reduction motor data

Model number	voltage	Empty load		Rated data			peak torque	weight	fuselage Long L
	voltage	speed	current	speed	torque	current	peak torque	weight	fuselage Long L
	DC	rpm	A	rpm	N.m	A	N.m	Kg	mm
1-034-150	one hundred and fifty	two point two	zero point two	two	thirty	zero point five	one hundred and twenty	two point five	two hundred and seven

Outline drawing of 1-034-050 series worm gear DC reduction motor

1-034-050 series worm gear DC reduction motor

[DC deceleration motor]NMRV series worm gear reduction motor

2026-4-29 9:53:11

The NMRV series worm gear reduction motor is composed of a worm gear reducer combined with various motors (including three-phase AC, single-phase AC, DC servo, permanent magnet DC motor, etc.). On the basis of complying with the parameters of GB10085-88 cylindrical worm gear, the product has absorbed advanced technologies at home and abroad, forming a square aluminum alloy box with a reasonable structure, beautiful appearance, good heat dissipation performance, and easy maintenance.

The NMRV series worm gear reduction motor runs smoothly, with low noise, high transmission speed ratio, strong carrying capacity, and can be equipped with various types of motors to achieve speed regulation and drag.

model naming

Diagram representation of each model

Detailed specifications

[DC deceleration motor]80JB+76ZYT series DC reduction motor

2026-4-29 9:53:04

80JB+76ZYT series DC reduction motor

Reduction ratio

Torque Kg. cm

speed r

Model number

1/10

1/15

1/20

1/25

1/40

1/75

1/100

1/150

1/180

rated

voltage

��VDC��

no-load

current

��A��

load

current

��A��

(mm)

thirty-two

forty-eight

fifty-two

sixty-four

eighty

one hundred and twenty

80JB-76ZYT001J1000

one hundred

sixty-six

fifty

forty

twenty-five

thirteen

ten

six point six

five point five

twenty-four

��0.8

��3

one hundred and fifty-five

80JB-76ZYT001J2000

two hundred

one hundred and thirty-three

one hundred

eighty

fifty

twenty-six

twenty

thirteen

eleven

twenty-four

��1.3

��5.5

one hundred and fifty-five

80JB-76ZYT001J3000

three hundred

two hundred

one hundred and fifty

one hundred and twenty

seventy-five

forty

thirty

twenty

sixteen

twenty-four

��1.7

��7.5

one hundred and fifty-five

80JB-76ZYT001J4000

four hundred

two hundred and sixty-six

two hundred

one hundred and sixty

one hundred

fifty-two

forty

twenty-six

twenty-two

twenty-four

��2.1

��10

one hundred and fifty-five

[DC deceleration motor]80JB+70ZYT series DC reduction motor

2026-4-29 9:52:35

80JB+70ZYT series DC reduction motor

Reduction ratio

Torque Kg. cm

speed r

Model number

1/10

1/15

1/20

1/25

1/40

1/75

1/100

1/150

1/180

rated voltage

��VDC��

No load current

��mA��

load current

��A��

(mm)

ten

twelve

sixteen

twenty

thirty-two

fifty-five

seventy-five

eighty

80JB-70ZYT001J2000

two hundred

one hundred and thirty-three

one hundred

eighty

fifty

twenty-six

twenty

thirteen

eleven

twenty-four

��200

��1.3

one hundred and forty

80JB-70ZYT001J3000

three hundred

two hundred

one hundred and fifty

one hundred and twenty

seventy-five

forty

thirty

twenty

sixteen

twenty-four

��400

��2

one hundred and forty

80JB-70ZYT001J4000

four hundred

two hundred and sixty-six

two hundred

one hundred and sixty

one hundred

fifty-two

forty

twenty-six

twenty-two

twenty-four

��600

��2.7

one hundred and forty

Reduction ratio

Torque Kg. cm

speed r

Model number

1/10

1/15

1/20

1/25

1/40

1/75

1/100

1/150

1/180

rated voltage

��VDC��

No load current

��mA��

load current

��A��

(mm)

twenty

twenty-four

thirty-two

forty

sixty-four

eighty

80JB-70ZYT002J2000

two hundred

one hundred and thirty-three

one hundred

eighty

fifty

twenty-six

twenty

thirteen

eleven

twenty-four

��200

��2.7

one hundred and fifty-five

80JB-70ZYT002J3000

three hundred

two hundred

one hundred and fifty

one hundred and twenty

seventy-five

forty

thirty

twenty

sixteen

twenty-four

��400

��4

one hundred and fifty-five

80JB-70ZYT002J4000

four hundred

two hundred and sixty-six

two hundred

one hundred and sixty

one hundred

fifty-two

forty

twenty-six

twenty-two

twenty-four

��600

��5.4

one hundred and fifty-five

80JB+70ZYT series DC reduction motor

[DC deceleration motor]70JB+57ZYN series DC reduction motor

2026-4-29 9:51:49

70JB+57ZYN series DC reduction motor

Reduction ratio Torque Kg. cm speed r Model number	1/10	1/15	1/20	1/25	1/40	1/75	1/100	rated voltage ��VDC��	No load current ��mA��	load current ��A��	L (mm)
Reduction ratio Torque Kg. cm speed r Model number	twenty	thirty	forty	fifty	eighty	eighty	eighty	rated voltage ��VDC��	No load current ��mA��	load current ��A��	L (mm)
70JB-57ZYN001J1000	one hundred	sixty-six	fifty	forty	twenty-five	thirteen	ten	twenty-four	��300	��1.7	one hundred and thirty-one
70JB-57ZYN001J2000	two hundred	one hundred and thirty-three	one hundred	eighty	fifty	twenty-six	twenty	twenty-four	��500	��3.4	one hundred and thirty-one
70JB-57ZYN001J3000	three hundred	two hundred	one hundred and fifty	one hundred and twenty	seventy-five	forty	thirty	twenty-four	��700	��5.1	one hundred and thirty-one
Reduction ratio Torque Kg. cm speed r Model number	1/10	1/15	1/20	1/25	1/40	1/75	1/100	rated voltage ��VDC��	no-load current ��mA��	load current ��A��	L (mm)
Reduction ratio Torque Kg. cm speed r Model number	fifteen	twenty	thirty	thirty-five	fifty-five	eighty	eighty	rated voltage ��VDC��	no-load current ��mA��	load current ��A��	L (mm)
70JB-57ZYN002J1000	one hundred	sixty-six	fifty	forty	twenty-five	thirteen	ten	twenty-four	��300	��1.2	one hundred and twenty-one
70JB-57ZYN002J2000	two hundred	one hundred and thirty-three	one hundred	eighty	fifty	twenty-six	twenty	twenty-four	��500	��2.4	one hundred and twenty-one
70JB-57ZYN002J3000	three hundred	two hundred	one hundred and fifty	one hundred and twenty	seventy-five	forty	thirty	twenty-four	��700	��3.6	one hundred and twenty-one

70JB+57ZYN series DC reduction motor

[DC deceleration motor]70JB+55ZYN series DC reduction motor

2026-4-29 9:51:08

Reduction ratio Torque Kg. cm speed r Model number	1/10	1/15	1/20	1/25	1/40	1/75	1/100	rated voltage ��VDC��	No load current ��mA��	load current ��A��	L (mm)
Reduction ratio Torque Kg. cm speed r Model number	ten	twelve	sixteen	twenty	thirty-two	fifty-five	seventy-five	rated voltage ��VDC��	No load current ��mA��	load current ��A��	L (mm)
70JB-55ZYN001J1000	one hundred	sixty-six	fifty	forty	twenty-five	thirteen	ten	twenty-four	��150	��0.7	one hundred and six
70JB-55ZYN001J2000	two hundred	one hundred and thirty-three	one hundred	eighty	fifty	twenty-six	twenty	twenty-four	��200	��1.3	one hundred and six
70JB-55ZYN001J3000	three hundred	two hundred	one hundred and fifty	one hundred and twenty	seventy-five	forty	thirty	twenty-four	��400	��2.7	one hundred and six

70JB+55ZYN series DC reduction motor

70JB+55ZYN series DC reduction motor

[DC deceleration motor]37ZYJ-36ZY series DC reduction motor

2026-4-29 9:50:40

Reduction ratio

Torque Kg. cm

speed r

Model number

1/6

1/10

1/17.5

1/30

1/50

1/90

1/160

1/270

1/470

1/810

voltage

(DC)

no-load

current

��mA��

load

current

��mA��

zero point eight

one

one point five

two point five

four

seven

twelve

twenty

37ZYJ-36ZY123000

five hundred

three hundred

one hundred and seventy

one hundred

sixty

thirty-three

eighteen

eleven

six

three point seven

twelve

��200

��700

37ZYJ-36ZY124500

seven hundred and fifty

four hundred and fifty

two hundred and fifty

one hundred and fifty

ninety

fifty

twenty-eight

sixteen

nine

five point five

twelve

��250

��1000

37ZYJ-36ZY126000

one thousand

six hundred

three hundred and forty

two hundred

one hundred and twenty

sixty-six

thirty-six

twenty-two

twelve

seven point four

twelve

��350

��1300

37ZYJ-36ZY243000

five hundred

three hundred

one hundred and seventy

one hundred

sixty

thirty-three

eighteen

eleven

six

three point seven

twenty-four

��120

��350

37ZYJ-36ZY244500

seven hundred and fifty

four hundred and fifty

two hundred and fifty

one hundred and fifty

ninety

fifty

twenty-eight

sixteen

nine

five point five

twenty-four

��150

��500

37ZYJ-36ZY246000

one thousand

six hundred

three hundred and forty

two hundred

one hundred and twenty

sixty-six

thirty-six

twenty-two

twelve

seven point four

twenty-four

��180

��700

reduction ratio

Reduction Ratio

(mm)

1/6~1/30

nineteen point five

1/30~1/100

twenty-two point five

1/120~1/300

twenty-six

1/360~1/900

twenty-nine

37ZYJ-36ZY series DC reduction motor

37ZYJ-36ZY series DC reduction motor

[DC deceleration motor]37ZYJ-528 series DC reduction motor

2026-4-29 9:49:59

Reduction ratio

Torque Kg. cm

speed r

Model number

1/6

1/10

1/17.5

1/30

1/50

1/90

1/160

1/270

1/470

1/810

voltage

(DC)

no-load

current

��mA��

load

current

��mA��

zero point two five

zero point four

zero point six

one

two

three

five

eight

fourteen

twenty

37ZYJ123000

five hundred

three hundred

one hundred and seventy

one hundred

sixty

thirty-three

eighteen

eleven

six

three point seven

twelve

��60

��300

37ZYJ124500

seven hundred and fifty

four hundred and fifty

two hundred and fifty

one hundred and fifty

ninety

fifty

twenty-eight

sixteen

nine

five point five

twelve

��90

��400

37ZYJ126000

one thousand

six hundred

three hundred and forty

two hundred

one hundred and twenty

sixty-six

thirty-six

twenty-two

twelve

seven point four

twelve

��120

��500

37ZYJ243000

five hundred

three hundred

one hundred and seventy

one hundred

sixty

thirty-three

eighteen

eleven

six

three point seven

twenty-four

��30

��200

37ZYJ244500

seven hundred and fifty

four hundred and fifty

two hundred and fifty

one hundred and fifty

ninety

fifty

twenty-eight

sixteen

nine

five point five

twenty-four

��60

��300

37ZYJ246000

one thousand

six hundred

three hundred and forty

two hundred

one hundred and twenty

sixty-six

thirty-six

twenty-two

twelve

seven point four

twenty-four

��80

��400

37ZYJ-528 series DC reduction motor

reduction ratio Reduction Ratio	L (mm)
1/6~1/30	nineteen point five
1/30~1/100	twenty-two point five
1/120~1/300	twenty-six
1/360~1/900	twenty-nine

37ZYJ-528 series DC reduction motor

[DC deceleration motor]35ZYJ series DC reduction motor

2026-4-29 9:49:17

35ZYJ series DC reduction motor

model	voltage (VDC)	no load		Rated data			rotation direction
model	voltage (VDC)	Current (mA)	Speed (r/min)	Torque (g.cm)	Current (mA)		rotation direction
35ZYJ001	six	��55	95±5%	one hundred and ninety	��160	95±5%	CCW
35ZYJ002	nine	��50	110±5%	one hundred and ninety	��135	110±5%	CCW
35ZYJ002A	six	��60	110±5%	one hundred and ninety	��170	110±5%	CCW
35ZYJ002B	six	��45	130±5%	one hundred and ninety	��90	128±5%	CCW
35ZYJ002C	twelve	��45	110±5%	one hundred and ninety	��110	110±5%	CCW
35ZYJ002D	nine	��50	110±5%	one hundred and ninety	��135	110±5%	CW
35ZYJ003	nine	��50	110±5%	one hundred and ninety	��135	110±5%	CCW
35ZYJ004	nine	��50	110±5%	one hundred and ninety	��135	110±5%	CCW
35ZYJ005	nine	��50	110±5%	one hundred and ninety	��135	110±5%	CCW
35ZYJ006	five	��55	90±5%	one hundred and ninety	��160	90±5%	CW
35ZYJ007	nine	��50	110±5%	one hundred and ninety	��135	110±5%	CCW
35ZYJ008	nine	��50	110±5%	one hundred and ninety	��135	110±5%	CW
35ZYJ009	nine	��50	90±5%	one hundred and ninety	��135	90±5%	CCW
35ZYJ030	five	��60	110±5%	one hundred and ninety	��170	110±5%	CW

35ZYJ series DC reduction motor

[DC deceleration motor]90ZYJW type DC reduction motor

2026-4-29 9:48:38

model	voltage	current	Output torque	maximum speed	output power
90ZYJW-001	DC 48V	7A	20 N.m 70 N.m	20 r/min 70 r/min	150W
90ZYJW-002	DC 90V	1A	20 N.m 70 N.m	20 r/min 70 r/min	150W

90ZYJW type DC reduction motor

[DC traction motor]ZD1220LB,ZD2420LB type DC traction motor

2026-4-26 10:57:02

ZD1220LB, ZD2420LB DC traction motors

Model/Type	ZD1220LB	ZD2420LB
Power/Power (KW)	one point five	two
Voltage/Voltage (V)	twelve	twenty-four
Current/Current (A)	three hundred	four hundred
Speed/Speed (r/min)	two thousand and two hundred	two thousand
Modulus/Module	32/64DP	32/64DP
Number of teeth/Meethno	twenty	twenty
Pressure angle/Pressure	thirty	thirty
Pitch diameter	fifteen point eight seven five	fifteen point eight seven five
Tooth tip diameter/Tip diameter	sixteen point five	sixteen point five
Root diameter	fourteen point zero four	fourteen point zero four
Measuring tip diameter/Tip diameter	one point five two four	one point five two four
Span tip	eighteen point one two five	eighteen point one two five
Turn/Rotation	CW/CCW	CW/CCW
Protection level/Protection	IP44	IP44
Weight/Weight (kg)	seven point two	seven point two
Work schedule/DUTY	2min	2min
Application type/Application	nine thousand	9000 or 10000

[DC traction motor]ZD2532C type DC traction motor

2026-4-26 10:56:43

ZD2532C DC traction motor

Model/Type	ZD2532C
Power/Power (KW)	three
Voltage/Voltage (V)	twenty-four
Current/Current (A)	one hundred and seventy-five
Speed/Speed (r/min)	two thousand and eight hundred
Turn/Rotation	CW
Protection level/Protection	IP44
Work schedule/DUTY	10min
Duty cycle/ED	10%ED

[DC traction motor]ZD2419 type DC traction motor

2026-4-26 10:56:35

ZD2419 type DC traction motor

Model/Type	ZD-0.8-48A	ZD-0.8-60A	ZD-0.8-72A
Power/Power (KW)	zero point eight	zero point eight	zero point eight
Voltage/Voltage (V)	forty-eight	sixty	seventy-two
Current/Current (A)	sixteen	fourteen	twelve
Speed/Speed (r/min)	three thousand and five hundred	three thousand and five hundred	three thousand and five hundred
Turn/Rotation	CW	CW	CW
Protection level/Protection	IP23	IP23	IP23
Weight/Weight (kg)	thirteen	thirteen	thirteen
Work schedule/DUTY	30min	30min	30min

[DC traction motor]ZD1225,ZD2425 type DC traction motor

2026-4-26 10:56:21

ZD1225, ZD2425 DC traction motors

Model/Type	ZD1225	ZD2425
Power/Power (KW)	one point six	two point five
Voltage/Voltage (V)	twelve	twenty-four
Current/Current (A)	one hundred and ninety-five	one hundred and sixty-five
Speed/Speed (r/min)	two thousand and five hundred	two thousand and six hundred
Turn/Rotation	CW	CW
Protection level/Protection	IP44	IP44
Excitation method/Excitation	Re excitation	Re excitation
Weight/Weight (kg)	seven point five	seven point five
Work schedule/DUTY	2min	2min
Work schedule/DUTY	7.5%ED	7.5%ED

[DC traction motor]ZD1217,ZD2417 type DC traction motor

2026-4-26 10:56:08

ZD1217, ZD2417 DC traction motors

Model/Type	ZD1217	ZD2417
Power/Power (KW)	one point six	two point five
Voltage/Voltage (V)	twelve	twenty-four
Current/Current (A)	one hundred and ninety-five	one hundred and sixty-five
Speed/Speed (r/min)	two thousand and five hundred	two thousand and six hundred
Turn/Rotation	CW	CW
Protection level/Protection	IP44	IP44
Excitation method/Excitation	Re excitation	Re excitation
Weight/Weight (kg)	seven	seven
Work schedule/DUTY	2min	2min
Work schedule/DUTY	7.5%ED	7.5%ED

[DC traction motor]ZD2415 type DC traction motor

2026-4-26 10:55:56

ZD2415 DC traction motor

Model/Type	ZD2415
Modulus/Module	22DP(1.1545)
Power/Power (KW)	one point five
Voltage/Voltage (V)	twenty-four
Current/Current (A)	one hundred and twelve
Speed/Speed (r/min)	two thousand and six hundred
Turn/Rotation	CW
Protection level/Protection	IP44
Weight/Weight (kg)	six point five
Work schedule/DUTY	2min
Work schedule/DUTY	8%ED
Number of teeth/Tooth no	six
Pressure angle/Pressure	thirty-seven point five
Dividing circle diameter/Pitch dia	eleven point two five
Tooth tip diameter/Tip diameter	twelve point three eight
Root diameter	nine point eight eight
Public law length/Common normal	five point five six
Number of Spanned Teeth	two

[DC traction motor]ZD-0.8 series DC traction motor

2026-4-26 10:55:43

ZD-0.8 series DC traction motor

Model/Type	ZD-0.8-48A	ZD-0.8-60A	ZD-0.8-72A
Power/Power (KW)	zero point eight	zero point eight	zero point eight
Voltage/Voltage (V)	forty-eight	sixty	seventy-two
Current/Current (A)	sixteen	fourteen	twelve
Speed/Speed (r/min)	three thousand and five hundred	three thousand and five hundred	three thousand and five hundred
Turn/Rotation	CW	CW	CW
Protection level/Protection	IP23	IP23	IP23
Weight/Weight (kg)	thirteen	thirteen	thirteen
Work schedule/DUTY	30min	30min	30min

[DC traction motor]BZD64 type DC traction motor

2026-4-26 10:55:29

BZD64 type DC traction motor

Model/Type	BZD64
Modulus/Module	22DP(1.1545)
Power/Power (KW)	one point six
Voltage/Voltage (V)	twelve
Current/Current (A)	one hundred and ninety-five
Speed/Speed (r/min)	two thousand and five hundred
Turn/Rotation	CW
Protection level/Protection	IP44
Number of teeth/Tooth no	nine
Pressure angle/Pressure	thirty-seven point five
Dividing circle diameter/Pitch dia	eleven point two five
Tooth tip diameter/Tip diameter	twelve point three eight
Root diameter	nine point eight eight
Public law length/Common normal	five point five six
Number of Spanned Teeth	two
Excitation method/Excitation	Re excitation
Weight/Weight (kg)	seven point five
Work schedule/DUTY	2min
Work schedule/DUTY	7.5%ED

[DC traction motor]BZD3 type DC traction motor

2026-4-26 10:55:16

BZD3 type DC traction motor

Model/Type	BZD3(24V)	BZD3(12V)
Power/Power (KW)	two point five	one point six
Voltage/Voltage (V)	twenty-four	twelve
Current/Current (A)	one hundred and sixty-five	one hundred and ninety-five
Speed/Speed (r/min)	two thousand and six hundred	two thousand and five hundred
Turn/Rotation	CW	CW
Protection level/Protection	IP44	IP44
Excitation method/Excitation	Re excitation	Re excitation
Weight/Weight (kg)	seven point five	seven point five
Work schedule/DUTY	2min	2min
Work schedule/DUTY	7.5%ED	7.5%ED

[DC traction motor]BZD1 type DC traction motor

2026-4-26 10:55:04

BZD1 type DC traction motor

Model/Type	BZD1(24V)	BZD1(12V)
Power/Power (KW)	two point five	one point six
Voltage/Voltage (V)	twenty-four	twelve
Current/Current (A)	one hundred and sixty-five	one hundred and ninety-five
Speed/Speed (r/min)	two thousand and six hundred	two thousand and five hundred
Turn/Rotation	CW	CW
Protection level/Protection	IP44	IP44
Excitation method/Excitation	Re excitation	Re excitation
Weight/Weight (kg)	seven point five	seven point five
Work schedule/DUTY	2min	2min
Work schedule/DUTY	7.5%ED	7.5%ED

[DC traction motor]ZDY2426,ZDY1238 type DC traction motor

2026-4-26 10:54:52

ZDY2426, ZDY1238 type DC traction motor

Model/Type	ZDY2426	ZDY1238
Power/Power (KW)	1.9 (2.6HP)	2.8 (3.8HP)
Voltage/Voltage (V)	twenty-four	twelve
Current/Current (A)	one hundred and fifty	four hundred
Speed/Speed (r/min)	two thousand and three hundred	two thousand and fifty
Turn/Rotation	CW/CCW	CW/CCW
Protection level/Protection	IP44	IP44
Weight/Weight (kg)	seven	seven point seven
Work schedule/DUTY	2min	2min
Modulus/Module	32/64DP	32/64DP
Number of teeth/Meethno	twenty	twenty
Pressure angle/Pressure	thirty	thirty
Pitch diameter	fifteen point eight seven five	fifteen point eight seven five
Tooth tip diameter/Tip diameter	sixteen point five	sixteen point five
Root diameter	fourteen point zero four	fourteen point zero four
Measuring tip diameter/Tip diameter	one point five two four	one point five two four
Span tip	eighteen point one two five	eighteen point one two five

[DC traction motor]ZDY2108 type DC traction motor

2026-4-26 10:54:33

ZDY2108 DC traction motor

Model/Type	ZDY2108
Power/Power (KW)	zero point eight
Voltage/Voltage (V)	twenty-four
Current/Current (A)	sixty
Speed/Speed (r/min)	one thousand and five hundred
Turn/Rotation	CW/CCW
Protection level/Protection	IP44
Weight/Weight (kg)	twelve
Work schedule/DUTY	30min

[DC traction motor]ZDY2106 type DC traction motor

2026-4-26 10:54:24

ZDY2106 DC traction motor

Model/Type	ZDY2106
Power/Power (KW)	zero point six
Voltage/Voltage (V)	twenty-four
Current/Current (A)	forty
Speed/Speed (r/min)	one thousand and eight hundred
Turn/Rotation	CW/CCW
Protection level/Protection	IP44
Weight/Weight (kg)	seven
Work schedule/DUTY	30min

[DC traction motor]ZD2644 type DC traction motor

2026-4-26 10:54:17

ZD2644 type DC traction motor

Model/Type	ZD2644
Power/Power (KW)	two point two
Voltage/Voltage (V)	twenty-four
Current/Current (A)	one hundred and forty-five
Speed/Speed (r/min)	two thousand and six hundred
Turn/Rotation	CW
Protection level/Protection	IP44
Modulus/Module	22DP(1.1545)
Number of teeth/Tooth no	nine
Pressure angle/Pressure	thirty-seven point five
Dividing circle diameter/Pitch dia	eleven point two five
Tooth tip diameter/Tip diameter	twelve point three eight
Root diameter	nine point eight eight
Public law length/Common normal	five point five six
Number of Spanned Teeth	two
Work schedule/DUTY	2min
Work schedule/DUTY	7.5%ED

[DC traction motor]ZD1230.1F type DC traction motor

2026-4-26 10:54:04

ZD1230.1F type DC traction motor

Model/Type	ZD1230.1F
Modulus/Module	22DP(1.1545)
Power/Power (KW)	two point two
Voltage/Voltage (V)	twelve
Current/Current (A)	two hundred and sixty
Speed/Speed (r/min)	two thousand and five hundred
Turn/Rotation	CW
Protection level/Protection	IP44
Work schedule/DUTY	8min
Work schedule/DUTY	10%ED
Number of teeth/Tooth no	six
Pressure angle/Pressure	thirty-seven point five
Dividing circle diameter/Pitch dia	eleven point two five
Tooth tip diameter/Tip diameter	twelve point three eight
Root diameter	nine point eight eight
Public law length/Common normal	five point five six
Number of Spanned Teeth	two

[DC traction motor]BZD12 DC traction motor

2026-4-26 10:53:51

BZD12 DC traction motor

Voltage range (V) 12V~24V, 24V~100V
Speed range (rpm) 1500~3000
Power range (W) 801~6500

[DC traction motor]BZD13(12V) DC traction motor

2026-4-26 10:53:48

BZD13 (12V) DC traction motor

Voltage range (V) 0~12V, 12V~24V
Speed range (rpm) 1500~3000
Power range (W) 801~6500

[DC traction motor]D108D1,D208D1 DC traction motor

2026-4-26 10:53:45

D108D1, D208D1 DC traction motor

Voltage range (V) 12V~24V, 24V~100V
Speed range (rpm) 0~1500
Power range (W) 801~6500

[DC traction motor]D108XXRT,D208XXRT DC traction motor

2026-4-26 10:53:40

D108XXRT, D208XXRT DC traction motor

Voltage range (V) 12V~24V, 24V~100V
Speed range (rpm) 0~1500
Power range (W) 801~6500

[DC traction motor]M208XXR,M208XXRDT DC traction motor

2026-4-26 10:53:37

M208XXR, M208XXRDT DC traction motor

Voltage range (V) 0~12V, 12V~24V
Speed range (rpm) 0~1500
Power range (W) 801~6500

[DC traction motor]M108XXR,M108XXRDT DC traction motor

2026-4-26 10:53:35

M108XXR, M108XXRDT DC traction motor

Voltage range (V) 0~12V, 12V~24V
Speed range (rpm) 0~1500
Power range (W) 801~6500

[DC traction motor]M208XXRC DC traction motor

2026-4-26 10:53:31

M208XXRC DC traction motor

Voltage range (V) 12V~24V, 24V~100V
Speed range (rpm) 0~1500
Power range (W) 801~6500

[DC traction motor]MB08XXR,MB08XXRT DC traction motor

2026-4-26 10:53:28

MB08XXR, MB08XXRT DC traction motor

Voltage range (V) 12V~24V, 24V~100V
Speed range (rpm) 0~1500
Power range (W) 801~6500

[DC traction motor]MA08XXR,MA08XXRT DC traction motor

2026-4-26 10:53:26

MA08XXR, MA08XXRT DC traction motor

Voltage range (V) 12V~24V, 24V~100V
Speed range (rpm) 0~1500
Power range (W) 801~6500

[DC traction motor]TG121200 DC traction motor

2026-4-26 10:53:22

TG121200 DC traction motor

Voltage range (V) 0~12V, 12V~24V
Speed range (rpm) 0~1500
Power range (W) 0~50

[DC traction motor]WS723000 DC traction motor

2026-4-26 10:53:19

WS723000 DC traction motor

RPM 61
Voltage range (V) 0~12V, 12V~24V
Speed range (rpm) 0~1500
Power range (W) 801~6500

[DC traction motor]XQD-4.5-48 DC traction motor

2026-4-26 10:53:16

XQD-4.5-48 DC traction motor

Voltage range (V) 24V~100V
Speed range (rpm) 3000~6000
Power range (W) 801~6500

[DC traction motor]YT1235 DC traction motor

2026-4-26 10:53:13

YT1235 DC traction motor

Voltage range (V) 0~12V
Speed range (rpm) 3000~6000
Power range (W) 801~6500

[DC traction motor]ZD112DT,ZD212DT DC traction motor

2026-4-26 10:53:10

ZD112DT, ZD212DT DC traction motor

Voltage range (V) 12V~24V, 24V~100V
Speed range (rpm) 0~1500
Power range (W) 801~6500

[DC traction motor]ZD1221MG DC traction motor

2026-4-26 10:53:06

ZD1221MG DC traction motor

Voltage range (V) 0~12V, 12V~24V
Speed range (rpm) 0~1500
Power range (W) 801~6500

[DC traction motor]ZD1223BK,ZD2423BK DC traction motor

2026-4-26 10:53:04

ZD1223BK, ZD2423BK DC traction motor

Voltage range (V) 0~12V, 12V~24V
Speed range (rpm) 1500~3000
Power range (W) 801~6500

[DC traction motor]ZD1225C DC traction motor

2026-4-26 10:53:01

ZD1225C DC traction motor

Voltage range (V) 0~12V, 12V~24V
Speed range (rpm) 1500~3000
Power range (W) 801~6500

[DC traction motor]ZD1228,ZD2428 DC traction motor

2026-4-26 10:52:58

ZD1228, ZD2428 DC traction motor

Voltage range (V) 24V~100V, 12V~24V
Speed range (rpm) 1500~3000
Power range (W) 801~6500

[DC traction motor]ZD2941F DC traction motor

2026-4-26 10:52:55

ZD2941F DC traction motor

Voltage range (V) 12V~24V, 24V~100V
Speed range (rpm) 3000~6000
Power range (W) 801~6500

[DC traction motor]ZDY12V,ZDY24V DC traction motor

2026-4-26 10:52:53

ZDY12V, ZDY24V DC traction motor

Voltage range (V) 12V~24V, 24V~100V
Speed range (rpm) 0~1500
Power range (W) 801~6500

[DC traction motor]ZDY105MG DC traction motor

2026-4-26 10:52:50

ZDY105MG DC traction motor

Voltage range (V) 0~12V, 12V~24V
Speed range (rpm) 0~1500
Power range (W) 801~6500

[DC traction motor]ZDY108F5,ZDY208F5,ZDY408F5 DC traction motor

2026-4-26 10:52:47

ZDY108F5, ZDY208F5, ZDY408F5 DC traction motor

Voltage range (V) 0~12V, 12V~24V
Speed range (rpm) 0~1500
Power range (W) 801~6500

[DC traction motor]ZDY112MG DC traction motor

2026-4-26 10:52:44

ZDY112MG DC traction motor

RPM 61
Voltage range (V) 0~12V, 12V~24V
Speed range (rpm) 0~1500
Power range (W) 801~6500

[DC traction motor]ZDY408ZL DC traction motor

2026-4-26 10:52:40

ZDY408ZL DC traction motor

Voltage range (V) 24V~100V
Speed range (rpm) 0~1500
Power range (W) 801~6500

[DC traction motor]ZDY2412,ZDY4812 DC traction motor

2026-4-26 10:52:36

ZDY2412, ZDY4812 DC traction motor

Voltage range (V) 12V~24V, 24V~100V
Speed range (rpm) 1500~3000
Power range (W) 801~6500

[DC traction motor]ZDY240500CW DC traction motor

2026-4-26 10:52:33

ZDY240500CW DC traction motor

Voltage range (V) 12V~24V, 24V~100V
Speed range (rpm) 0~1500
Power range (W) 801~6500

[DC traction motor]ZDYA08F DC traction motor

2026-4-26 10:52:31

ZDYA08F DC traction motor

Voltage range (V) 0~12V
Speed range (rpm) 0~1500
Power range (W) 801~6500

[DC traction motor]BZD2FAN DC traction motor

2026-4-26 10:52:27

BZD2FAN DC traction motor

Voltage V	Power W	current A	RPM rotational speed	Torque Nm	protection level	working system	waterproof rating	steering	number of teeth	type
twenty-four	two thousand and two hundred	one hundred and thirty	two thousand and seven hundred	eight	F	S=2min S3=7.5%ED	IP54	CW&CCW	two	Re excitation

[DC traction motor]BZD4(12V)N38 DC traction motor

2026-4-26 10:52:18

BZD4 (12V) N38 DC traction motor

Voltage V	Power W	current A	RPM rotational speed	Torque Nm	protection level	working system	waterproof rating	steering	number of teeth	type
twelve	two thousand	two hundred and twenty	two thousand and one hundred	nine	F	S=8min S3=20%ED	IP45	CW&CCW	nine	permanent magnet

[DC traction motor]XQD-0.75-3 DC Forklift (Oil Pump) Motor

2026-4-26 10:52:09

XQD-0.75-3 DC Forklift (Oil Pump) Motor

parameter name	parameter value
Motor model	XQD-0.75-3
Rated power (KW)	zero point seven five
Battery voltage (V)	forty-eight
Rated voltage (V)	forty-five
Rated current (A)	twenty-five
Rated speed (r/min)	one thousand five hundred and fifty
Work schedule (min)	thirty
structural characteristics	Straight groove axis

[DC traction motor]XQ-4.2-2A1 type DC traction motor

2026-4-26 10:52:01

XQ-4.2-2A1 type DC traction motor

parameter name	parameter value
Motor model	XQ-4.2-2A1
Rated power (KW)	four point two
Battery voltage (V)	forty-eight
Rated voltage (V)	forty-eight
Rated current (A)	one hundred and two
Rated speed (r/min)	two thousand and eight hundred
Work schedule (min)	sixty
protection level	IP44
structural characteristics	Method: Lan 18 tooth internal spline, can be equipped with a speed sensor

[DC traction motor]XQ-5-8B type DC traction motor

2026-4-26 10:51:53

XQ-5-8B DC traction motor

parameter name	parameter value
Motor model	XQ-5-8B
Rated power (KW)	five
Battery voltage (V)	seventy-two
Rated voltage (V)	sixty-seven
Rated current (A)	ninety-three
Rated speed (r/min)	one thousand and five hundred
Work schedule (min)	sixty
protection level	IP21
structural characteristics	6-speed external spline, can be equipped with speed sensor

[DC traction motor]XQ-2.2-2BS type DC traction motor

2026-4-26 10:51:45

XQ-2.2-2BS type DC traction motor

parameter name	parameter value
Motor model	XQ-2.2-2BS
Rated power (KW)	two point two
Battery voltage (V)	forty-eight
Rated voltage (V)	forty-eight
Rated current (A)	fifty-seven
Rated speed (r/min)	one thousand six hundred and fifty
Work schedule (min)	sixty
protection level	IP44
structural characteristics	Dual output shaft. Two end single key cylindrical shaft

[DC traction motor]XQ-4.5P type DC traction motor

2026-4-26 10:51:37

XQ-4.5P type DC traction motor

parameter name	parameter value
Motor model	XQ-4.5P
Rated power (KW)	four point five
Battery voltage (V)	forty-eight
Rated voltage (V)	forty-eight
Rated current (A)	one hundred and seventeen
Rated speed (r/min)	one thousand and six hundred
Work schedule (min)	sixty
protection level	IP21
structural characteristics	Two cylindrical shafts at both ends

[DC traction motor]Explosion proof DC traction motor

2026-4-26 10:51:29

XQDB-1H Explosion proof DC Traction Motor

rated power	1 kW
rated voltage	45 V
rated current	31 A
rated speed	1500 r/min
Quota	S2 30min
excitation method	Re excitation
insulation class	F
protection level	IP 54
Explosion proof sign	Ex d 2B T4 Gb
rotation direction	Rotate counterclockwise at the output end

[DC traction motor]XQ-3.8AH High altitude work platform DC traction motor

2026-4-26 10:51:20

XQ-3.8AH high-altitude work platform DC traction motor

Motor model	XQ-3.8AH
rated power	3.8KW
rated voltage	48V(D.C)
rated current	95A
rated speed	3600r/min
quota	60min
protection level	IP44
Applicable to	Scissor type aerial work platform oil pump
structural characteristics	Horizontal with footings, internally built (z=9) concave shaft extension, notch diameter of 82.56

[DC traction motor]XQD-4.5H High altitude work platform DC traction motor

2026-4-26 10:51:13

XQD-4.5H high-altitude work platform DC traction motor

Motor model	XQD-4.5H
rated power	4.5KW
rated voltage	24V(D.C)
rated current	239A
rated speed	2700r/min
excitation method	Re excitation
quota	5min
protection level	IP20
Applicable to	Scissor type aerial work platform lifting oil pump
structural characteristics	Horizontal with footings, internal spline with concave shaft extension (z=9), notch diameter of 82.56mm

[DC traction motor]XQD-3.3H High altitude work platform DC traction motor

2026-4-26 10:51:04

XQD-3.3H high-altitude work platform DC traction motor

Motor model	XQD-3.3H
rated power	3.3KW
rated voltage	24V(D.C)
rated current	180A
rated speed	3050r/min
excitation method	Re excitation
quota	5min
protection level	IP20
Applicable to	Scissor type aerial work platform lifting oil pump
structural characteristics	Horizontal with footings, internal spline with concave shaft extension (z=9), notch diameter of 82.56mm

[DC traction motor]XCQ-0.5CH High altitude work platform DC traction motor

2026-4-26 10:50:55

XCQ-0.5CH high-altitude work platform DC traction motor

Motor model	XCQ-0.5CH
rated power	0.5KW
rated voltage	24V(D.C)
rated current	28A
rated speed	2600r/min
excitation method	permanent magnet
quota	60min
protection level	IP20
Applicable to	Scissor type aerial work platform drive wheel
structural characteristics	One end of the cylindrical shaft (�� 30 × 36), one end of the spline shaft (m=1, z=12)

[DC traction motor]Electric vehicle DC traction motor

2026-4-26 10:50:45

XQT-5-16HV electric vehicle DC traction motor

Motor model	XQT-5-16HV
rated power	5KW
rated voltage	60V(D.C)
rated current	98A
rated speed	2800r/min
rated field current	9A
Minimum excitation current	5.2A
quota	60min
protection level	IP44
excitation method	separately excited
Applicable to	Low speed electric vehicles
structural characteristics	Method: Lan connection, spline output shaft (m=1, z=22), with speed sensor

[DC traction motor]XQ-5-7HV Sightseeing car DC traction motor

2026-4-26 10:50:36

XQ-5-7HV sightseeing car DC traction motor

Motor model	XQ-5-7HV
rated power	5KW
rated voltage	72V(D.C)
rated current	84A
rated speed	2800r/min
quota	60min
protection level	IP20
excitation method	String excitation
Applicable to	8-11 seat sightseeing bus
structural characteristics	Unexplained concave shaft extension, 19 tooth imperial internal spline, with speed sensor

[DC traction motor]XQ-5-5H Sightseeing car DC traction motor

2026-4-26 10:50:28

XQ-5-5H sightseeing car DC traction motor

Motor model	XQ-5-5H
rated power	5KW
rated voltage	67V(D.C)
rated current	93A
rated speed	1500r/min
quota	60min
protection level	IP20
excitation method	String excitation
Applicable to	11-14 seat tour bus
structural characteristics	Spline shaft (6-28 × 23 × 6)

[DC traction motor]XQ-4-13HV Sightseeing car DC traction motor

2026-4-26 10:50:20

XQ-4-13HV sightseeing car DC traction motor

Motor model	XQ-4-13HV
rated power	4KW
rated voltage	48V(A.C)
rated current	102A
rated speed	2540r/min
quota	60min
protection level	IP20
Applicable to	ATV, 6-8 seat tour bus
structural characteristics	Method: Lan connection, internal spline output shaft (m=1, z=18), with speed sensor

[DC traction motor]XQT-4HV Golf Cart DC Traction Motor

2026-4-26 10:50:10

XQT-4HV golf cart DC traction motor

Motor model	XQT-4HV
rated power	4KW
rated voltage	48V(D.C)
rated current	101A
rated speed	2800r/min
rated field current	9A
Minimum excitation current	5A
quota	60min
protection level	IP44
excitation method	separately excited
Applicable to	6-8 seater golf carts
structural characteristics	Unexplained concave shaft extension, 19 tooth imperial internal spline, with speed sensor

[DC traction motor]XQT-3-14HV Golf Cart DC Traction Motor

2026-4-26 10:49:59

XQT-3-14HV golf cart DC traction motor

Motor model	XQT-3-14HV
rated power	3KW
rated voltage	36V(D.C)
rated current	97A
rated speed	3210r/min
rated field current	10A
Minimum excitation current	5A
quota	60min
protection level	IP44
excitation method	separately excited
Applicable to	4-6 seater golf carts
structural characteristics	Unexplained concave shaft extension, 19 tooth imperial internal spline, with speed sensor

[DC traction motor]XQT-3-5H3V Golf Cart DC Traction Motor

2026-4-26 10:49:50

XQT-3-5H3V golf cart DC traction motor

Motor model	XQT-3-5H3V
rated power	3KW
rated voltage	48V(D.C)
rated current	78A
rated speed	2800r/min
rated field current	7.5A
Minimum excitation current	5A
quota	60min
protection level	IP44
excitation method	separately excited
Applicable to	4-6 seater golf carts
structural characteristics	Unexplained concave shaft extension, 19 tooth imperial internal spline, with speed sensor

[DC traction motor]Electric forklift DC traction motor

2026-4-26 10:49:41

XQD-8.2-1H electric forklift DC traction motor

Motor model	XQD-8.2-1H
rated power	8.2KW
rated voltage	45V(D.C)
rated current	232A
rated speed	1600r/min
quota	5min
protection level	IP44
excitation method	String excitation
Applicable to	1.6t forklift lifting
structural characteristics	Horizontal with feet, four tooth internal spline (4-18 × 15 × 5) with concave shaft extension, notch of �� 80, with lead out wire

[DC traction motor]Electric forklift DC traction motor

2026-4-26 10:49:33

XQD-4.5-1H electric forklift DC traction motor

Motor model	XQD-4.5-1H
rated power	4.5KW
rated voltage	22V(D.C)
rated current	134A
rated speed	1700r/min
quota	15min
protection level	IP20
Applicable to	Lift oil pump
structural characteristics	Horizontal with footings, flat mouth with concave shaft extension, notch with a diameter of 80

[DC traction motor]Electric forklift DC traction motor

2026-4-26 10:49:25

XQT-5AH1 electric forklift DC traction motor

Motor model	XQT-5AH1
rated power	5KW
rated voltage	45V(D.C)
rated current	137A
rated speed	1480r/min
rated field current	12A
Minimum excitation current	7.5A
quota	60min
protection level	IP20
excitation method	separately excited
Applicable to	1.5t forklift walking
structural characteristics	Six tooth spline output shaft (m=1.5, z=18) with lead out wire

[DC traction motor]Electric forklift DC traction motor

2026-4-26 10:49:15

XQ-6.3-2H electric forklift DC traction motor

Motor model	XQ-6.3-2H
rated power	6.3KW
rated voltage	45V(D.C)
rated current	173A
rated speed	1200r/min
quota	60min
protection level	IP20
excitation method	String excitation
Applicable to	2t forklift walking
structural characteristics	Spline shaft (6-32 × 26 × 6) with lead out wire

[DC traction motor]Electric forklift DC traction motor

2026-4-26 10:49:07

XQ-5AH1 electric forklift DC traction motor

Motor model	XQ-5AH1
rated power	5KW
rated voltage	45V(D.C)
rated current	137A
rated speed	1480r/min
quota	60min
protection level	IP20
excitation method	String excitation
Applicable to	1.5t forklift walking
structural characteristics	Spline shaft (6-28 × 23 × 6) with lead out wire

[DC traction motor]XQT-3.2-2H DC traction motor for handling vehicle

2026-4-26 10:48:59

XQT-3.2-2H DC traction motor for handling vehicle

Motor model	XQT-3.2-2H
rated power	3.2KW
rated voltage	22V(D.C)
rated current	174A
rated speed	1150r/min
rated field current	16.8A
Minimum excitation current	5.5A
quota	60min
protection level	IP44
excitation method	separately excited
Applicable to	pallet truck
structural characteristics	Internal spline output shaft (4-20 × 16 × 4)

[DC traction motor]XQ-4.5-1H DC traction motor for handling vehicle

2026-4-26 10:48:50

XQ-4.5-1H DC traction motor for handling vehicle

Motor model	XQ-4.5-1H
rated power	4.5KW
rated voltage	45V(D.C)
rated current	125A
rated speed	1800r/min
quota	60min
protection level	IP20
excitation method	String excitation
Applicable to	Transporter, flatbed truck
structural characteristics	Double taper output shaft

[DC traction motor]XQ-0.75-1CH1 DC traction motor for handling vehicle

2026-4-26 10:48:42

XQ-0.75-1CH1 DC Traction Motor for Transporter

Motor model	XQ-0.75-1CH1
rated power	0.75KW
rated voltage	22V��D.C��
rated current	50A
rated speed	2100r/min
quota	30min
protection level	IP44
Applicable to	Tray handling truck drive wheel
structural characteristics	Cylindrical shaft out

[DC traction motor]XQD-3.3B type DC auxiliary motor

2026-4-26 10:48:35

XQD-3.3B DC auxiliary motor

parameter name	parameter value
Motor model	XQD-3.3B
Rated power (KW)	three point three
Battery voltage (V)	twenty-four
Rated voltage (V)	twenty-four
Rated current (A)	one hundred and eighty
Rated speed (r/min)	three thousand and fifty
Work schedule (min)	five
protection level	IP20
structural characteristics	9-tooth involute internal spline

[DC traction motor]XQB-4.5 Explosion proof DC Traction Motor

2026-4-26 10:48:27

XQB-4.5 Explosion proof DC Traction Motor

Motor model	XQB-4.5
Rated power (KW)	four point five
Battery voltage (V)	forty-eight
Rated voltage (V)	forty-five
Rated current (A)	one hundred and eighteen
Rated speed (r/min)	one thousand and eight hundred
Work schedule (min)	sixty
protection level	IP54
structural characteristics	6-speed external spline

[DC traction motor]XYQD-12CC01 AC auxiliary motor

2026-4-26 10:48:20

XYQD-12CC01 AC auxiliary motor

parameter name	parameter value
Motor model	XYQD-12CC01
Rated power (KW)	twelve
Battery voltage (V)	forty-eight
Rated voltage (V)	thirty-four
Rated current (A)	two hundred and seventy-eight
Rated speed (r/min)	two thousand one hundred and eighty
Frequency (HZ)	seventy-five
Work schedule (min)	fifteen
protection level	IP44
Encoder output signal	64 bit
structural characteristics	10 tooth imperial involute internal spline

[DC traction motor]XQ-1.1TA type DC traction motor

2026-4-26 10:48:10

XQ-1.1TA type DC traction motor

[DC traction motor]XQ-1.1T-1 type DC traction motor

2026-4-26 10:48:08

XQ-1.1T-1 type DC traction motor

[DC traction motor]Electromagnetic traction motor

2026-4-26 10:48:06

ZYTQ80 electromagnetic traction motor

[DC traction motor]Electromagnetic traction motor

2026-4-26 10:48:05

MODEL model		FULL LOAD Full load
	VOLTAGE	OUTPUT	TORQUE	SPEED	CURRENT	EFF	L
	voltage	output power	torque	speed	current	efficiency
	V	W	N·m	RPM	A	%
ZLCQ112-01	twelve	seven hundred	three point five	one thousand and nine hundred	one hundred and twenty-five	forty-seven	one hundred and fifty-six
ZLCQ112-02	twelve	one thousand and five hundred	six	two thousand and four hundred	two hundred and forty	fifty-two	one hundred and seventy-three

ZLCQ112 electromagnetic traction motor

[DC traction motor]YQP-15-10 Mining AC Variable Frequency Traction Motor

2026-4-26 10:47:51

YQP-15-10 (primary drive) mining general AC variable frequency traction motor

Rated power: 15 kW
Rated voltage: 68V
Rated current: 180A
Rated frequency: 0-50Hz
Rated speed: 590r/min
Insulation level: F

[DC traction motor]ZQ-4-5 DC traction motor

2026-4-26 10:47:46

ZQ-4-5 Main Technical Parameters

Quota: hourly system
Rated power: 3.5KW
Rated voltage: 97V
Rated current: 45A
Rated speed: 960r/min
Maximum current: 90A
Maximum speed: 2400r/min
Insulation level: B
Excitation method: series excitation
Cooling type: Closed self cooling Weight: 120kg

ZQ-4-5 DC traction motor applicable motor model number: ZK1.5-679/100 mining overhead electric locomotive

ZQ-4-5 DC traction motor

[DC traction motor]ZQ-4-4 DC traction motor

2026-4-26 10:47:40

Technical parameters of ZQ-4-4 DC traction motor

Quota: hourly system
Rated power: 3.5KW
Rated voltage: 42V
Rated current: 105A
Rated speed: 960r/min
Maximum current: 210A
Maximum speed: 2400r/min
Insulation level: B
Excitation method: series excitation
Cooling type: Closed self cooling

ZQ-4-4 DC traction motor applicable motor model numbers: XK.5,4,6,7,9,48-KBT, XK2.5-6, 7,9,48A battery electric locomotive

ZQ-4-4 DC traction motor

[DC traction motor]YQP-30-10 Mining AC Variable Frequency Traction Motor

2026-4-26 10:47:34

YQP-30-10 (primary drive) mining general AC variable frequency traction motor

Rated power: 30 kW
Rated voltage: 380/220V:
Rated frequency: 5-50Hz
Rated speed: 590r/min
Extreme number: 10
Insulation level: F

YQP-30-10 Mining AC Variable Frequency Traction Motor Applicable Motor Model Number: CJY7, 12 ton overhead electric locomotive

[DC traction motor]YQP-22-10 Mining AC Variable Frequency Traction Motor

2026-4-26 10:47:29

YQP-22-10 (primary drive) mining general type AC variable frequency traction motor

Rated power: 22 kW
Rated voltage: 380/220V:
Rated frequency: 5-50Hz
Rated speed: 592r/min
Rated efficiency: 0.90
Power factor: 0.70
Extreme number: 10
Insulation level: F

YQP-22-10 Mining AC Variable Frequency Traction Motor Applicable Motor Model Number: CJY7, 7-10 ton overhead electric locomotive

[DC traction motor]YQP-37-4 AC variable frequency traction motor

2026-4-26 10:47:24

Communication frequency conversion YQP-37-4 (secondary transmission)
Working system: hourly system
Rated power: 37kw
Rated voltage: 150V
Rated current: 182A
Rated speed: 764r/min
Constant torque frequency modulation range: 0-27 Hz
Insulation level: H

YQP-37-4 AC variable frequency traction motor

[DC traction motor]ZQ-78 DC traction motor

2026-4-26 10:47:19

ZQ-78 DC traction motor

[DC traction motor]ZQ-12A/21/24/ DC traction motor

2026-4-26 10:47:17

ZQ-12A/21/24/DC traction motor

Quota: hourly system
Rated power: 24KW
Rated voltage: 550V
Rated current: 50.5A
Rated speed: 600r/min
Maximum current: 111A
Maximum speed: 1400r/min
Insulation level: B
Excitation method: series excitation
Cooling type: Closed self cooling
Weight: 545kg

ZQ-12A/21/24/DC traction motor applicable motor model numbers: ZK7-6, 7, 9/550, ZK10-6, 7, 9/550 overhead electric locomotive

[DC traction motor]ZQ-110 DC traction motor

2026-4-26 10:47:11

ZQ-110 DC traction motor

[DC traction motor]30/52 DC traction motor

2026-4-26 10:47:09

30/52 DC traction motor

[DC traction motor]ZQ-24 DC traction motor

2026-4-26 10:47:08

ZQ-24 DC traction motor

Quota: hourly system
Rated power: 24KW
Rated voltage: 550V
Rated current: 50.5A
Rated speed: 600r/min
Maximum current: 111A
Maximum speed: 1400r/min
Insulation level: B
Excitation method: series excitation
Cooling type: Closed self cooling
Weight: 525Kg

ZQ-24 DC traction motor applicable motor model numbers: ZK7-6, 7, 9/550, ZK10-6, 7, 9/550 overhead electric locomotive

[DC traction motor]Mining explosion-proof DC traction auxiliary motor

2026-4-26 10:47:02

ZQB-2 Mining Explosion proof DC Traction Auxiliary Motor System for CTY12 Explosion proof Special Battery type Mining Electric Locomotive Air Brake Air Compressor as Drive Motor

ZQB-2 Mining Explosion proof DC Traction Auxiliary Motor

[DC traction motor]ZQB-1 DC traction auxiliary motor

2026-4-26 10:46:59

Meaning of ZQB-1 DC traction auxiliary motor model

working conditions
a) The altitude shall not exceed 1000m.
b) The maximum temperature of the air in the shaded area shall not exceed 40 ��, and the minimum temperature shall not be lower than -25 ��. When used underground in coal mines, the temperature shall not be lower than -20 ��.
c) The monthly average maximum relative humidity of the wettest month shall not exceed 90% (the monthly average minimum temperature of the same month shall not exceed 25 ��), and the maximum relative humidity when used underground in coal mines shall not exceed 95%.
d) Explosive mixtures of methane or coal dust are allowed in the workplace.
Scope of application
The ZQB-1 mining explosion-proof DC traction auxiliary motor is used as the driving motor for the CTY8 explosion-proof special battery type mining electric locomotive air brake with an air compressor.

Structural Overview
The motor is an explosion-proof fully enclosed self cooling type, which relies on the motor housing for cooling. The machine base is formed by processing cast steel parts, and the end cover is made of steel plate lathe. There is an inspection window and an outlet box above the machine base. Through the inspection window, the working condition of the commutator and electric brush can be checked and the electric brush can be replaced; There are two terminal posts inside the outlet box, and external cables are introduced through a terminal port on the outlet box.
The electric motor has four main poles, and the interface between the main pole iron core and the casing is a flameproof surface.
The electric motor adopts four brush holders, each of which is equipped with a tail electric brush. The brush holder is fixed on a rotatable plastic brush holder to adjust its neutral position. The brush holder is compressed by a constant force spring.
6207 single row radial ball bearings are used for the front and rear bearings of the electric motor, and the bearings are lubricated with No. 3 industrial lithium based grease. The mating surfaces between the bearing cover and the shaft, as well as between the end cover and the machine base, are all explosion-proof surfaces.

ZQB-1 DC traction auxiliary motor parameters

ZQB-1 DC traction auxiliary motor

[DC traction motor]XQB-15/ZQ-15B/15KW DC traction motor

2026-4-26 10:46:48

XQB-15/ZQ-15B/15KW DC traction motor model meaning

Working conditions of XQB-15/ZQ-15B/15KW DC traction motor
1. Altitude not exceeding 1000m;
2. The ambient temperature should not exceed+40 �� (in shaded areas). The minimum air temperature shall not be lower than -20 ��;
3. Workplaces with methane, coal dust, and explosive mixtures;
4. The average maximum relative humidity of the wettest month shall not exceed 90% (the average minimum temperature of the same month shall not exceed 25 ��). The maximum relative temperature of the coal mine shall not exceed 95% (when the temperature is 25 ��).

Scope of application
XQB-15 is used as the main traction motor for an 8t battery electric locomotive.

XQB-15/ZQ-15B/15KW DC traction motor product parameters

Production name	Power (kW)	Voltage (V)	Current (A)	Speed (r/min)	Maximum speed (r/min)	insulation class	excitation method	Weight (kg)
hourly system	fifteen	one hundred and thirty	one hundred and thirty-six	one thousand and sixty	two thousand two hundred and thirty	F	skewer	three hundred and sixty-two
Continuous system	six point five	one hundred and thirty	sixty	one thousand five hundred and fifty	two thousand two hundred and thirty	F	skewer	three hundred and sixty-two

XQB-15/ZQ-15B/15KW DC traction motor

[DC traction motor]XQB-11/ZQ-11B/11KW Traction DC motor

2026-4-26 10:46:35

XQB-11/ZQ-11B/11KW traction DC motor model meaning

working conditions
a) Altitude not exceeding 1200mm;
b) The maximum temperature of the air shall not exceed 40 ��;
c) The minimum temperature shall not be lower than -20 ��;
d) The monthly average maximum relative humidity of the wettest month shall not exceed 90%, and the lowest average temperature of the same month shall not exceed 25 ��. Used for maximum relative humidity not exceeding 95% in coal mines underground;
e) The workplace is allowed to contain explosive mixtures of methane or coal dust;

Scope of application
The XQB-11 motor serves as the main traction motor for CTY (L) 8/6, 7, and 9 battery type explosion-proof special electric locomotives.

XQB-11/ZQ-11B/11KW traction DC motor product parameters

XQB-11/ZQ-11B/11KW traction DC motor

[DC traction motor]XQB-8/ZQ-8B/7.5KW Mining explosion-proof DC traction motor

2026-4-26 10:46:29

XQB-8/ZQ-8B/7.5KW Mining Explosion proof DC Traction Motor Model Meaning

working conditions
a) Altitude not exceeding 1200 meters;
b) The maximum temperature of the air shall not exceed 40 ��;
c) The minimum temperature shall not be lower than -20 ��;
d) The average maximum relative humidity of the wettest month shall not exceed 90% (the average minimum temperature of the same month shall not exceed 25 ��). Used for maximum relative humidity not exceeding 95% in coal mines underground;
e) Workplace allows explosive mixtures containing methane or coal dust
Scope of application
The XQB-8 mining explosion-proof DC traction motor system is a specialized drive motor for CTY5/6, 7, and 9 explosion-proof special type battery type underground mining electric locomotives.

XQB-8/ZQ-8B/7.5KW Mining Explosion proof DC Traction Motor Parameters
1.1 This product complies with the relevant provisions of JB/T6480-1992 "Basic Conditions for Rotating Traction Motors" and Q/DBCL020-2007 "Technical Conditions for Mining Explosion proof DC Traction Motors"
1.2 Technical specifications

XQB-8/ZQ-8B/7.5KW Mining Explosion proof DC Traction Motor

[DC traction motor]Explosion proof DC traction motor

2026-4-26 10:46:21

XQB-4/ZQ-4B/3.5KW Explosion proof DC Traction Motor Model Meaning

working conditions
a) Sea level not exceeding 1200m;
b) The maximum temperature of the air shall not exceed 40 ��;
c) The minimum temperature shall not be lower than -20 ��;
d) The average maximum relative humidity of the wettest month shall not exceed 90% (the average minimum temperature of the same month shall not exceed 25 ��, and the maximum relative temperature used for underground coal mines shall not exceed 95%). e) The workplace is allowed to contain explosive mixtures of methane or coal dust. Application scope: XQB-4 mining explosion-proof DC traction motor system is a special drive motor for CTY 2.5/6,7,9 explosion-proof special type battery type underground mining electric locomotives. Product parameters: This product complies with the standards JB/T6480-1992 "Basic Conditions for Rotating Traction Motors" and Q/DBCL020-2007 "Technical Conditions for Mining Explosion proof DC Traction Motors".

Rated	Hourly quota	Continuous quota
Rated power (KW)	three point five	one point three seven
Rated voltage (V)	forty-two	forty-two
Rated current (A)	one hundred and five	forty-two
Rated speed (r/min)	nine hundred and sixty	one thousand eight hundred and fifty
Maximum speed (r/min)	two thousand and four hundred
Excitation method	series excitation
Weight (kg)	one hundred and thirty-seven

XQB-4/ZQ-4B/3.5KW Explosion proof DC Traction Motor

[DC traction motor]ZQ-30/30KW series DC traction motor

2026-4-26 10:46:10

ZQ-30/30KW series DC traction motor model meaning

working conditions
a) The altitude shall not exceed 1200 meters.
b) The maximum temperature of the surrounding air is+40 ��, and the minimum temperature is -20 ��.
c) The relative humidity of the air is the highest in the wettest month, with an average maximum relative humidity of no more than 90%, and the average minimum temperature of that month is no higher than+25 ��.
d) Underground coal mine, an environment free from gas and coal dust explosion hazards.

Scope of application
ZQ-30 is suitable for general underground mining environmental conditions and is used to drive electric motors for 10 tons of 250V and 550V DC overhead mining electric locomotives.

ZQ-30/30KW series DC traction motor parameters

model Specification project	ZQ-30		ZQ-30-1 ZQ-30-2
quota	hour	continuous	hour	continuous
Power (kw)	thirty	thirteen	thirty	thirteen point one
Voltage (V)	two hundred and fifty		five hundred and fifty
Current (A)	one hundred and thirty-four	fifty-eight point seven	sixty-one	twenty-six point five
Speed (r/min)	one thousand four hundred and thirty-five	two thousand and two hundred	one thousand four hundred and thirty-five	two thousand one hundred and seventy
Maximum speed (r/min)	three thousand and fourteen
Excitation method	series excitation
insulation class	Grade B
cooling method	Fully enclosed natural cooling
Weight (kg)	four hundred		four hundred and ten

ZQ-30/30KW series DC traction motor

[DC traction motor]Explosion proof DC traction motor

2026-4-26 10:45:52

Main technical parameters of XQB-22/ZQ-22B/22KW explosion-proof DC traction motor

Quota: hourly system
Rated power: 22KW
Rated voltage: 180V
Rated current: 144A
Rated speed: 1190r/min
Maximum current: 288A
Maximum speed: 2400r/min
Insulation level: B
Excitation method: series excitation
Cooling type: Closed self cooling

XQB-22/ZQ-22B/22KW Explosion proof DC Traction Motor Applicable Motor Models: XK12-6, 7, 9/192-1KBT, XK12-7, 9/192-KBT Battery Electric Locomotive

[DC traction motor]ZQ-7/6.5KW DC traction motor

2026-4-26 10:45:43

ZQ-7/6.5KW DC traction motor model meaning

Working conditions of ZQ-7/6.5KW DC traction motor

Scope of application
ZQ-7 mining general type DC traction motor is used as the driving motor for CJY1.5/�� -250 and CJY3/�� -250 underground mining overhead electric locomotives.

Product Parameters

ZQ-7/6.5KW DC traction motor execution standards: JB/T6480-1992 "Basic Technical Conditions for Rotating Traction Motors" and Q/DBCL021-2007 "Mining Explosion proof DC Traction Motors".
Product type: The product type is a general mining type, with the symbol "KY".

[DC traction motor]ZQ-4-2/3.5KW type DC traction motor

2026-4-26 10:45:38

Application and Scope of ZQ-4-2/3.5KW DC Traction Motor

1. Used as the main traction motor for CJY1.5 mining overhead electric locomotive
2. Suitable for environments with an altitude not exceeding 1200mm and a temperature not exceeding 40 degrees Celsius, capable of working in dusty, humid, and non explosive air with vibrations and frequent start-up conditions.

Product support form and structure
This motor is a fully enclosed self cooling type, with B-grade insulation and 4 poles. The motor seat is made of cast steel, and there is a window hole on the top of the transmission end for observing and cleaning the commutator, replacing the electric brush, inspecting the window cover and machine base using felt pads, and then firmly sealing with bolts. The end cover is cast with cast steel and contains bearings inside.
The transmission end bearing adopts a bearing sleeve, while the non transmission end bearing is directly installed into the end cover bearing chamber, with 207 bearings used at both ends. The motor commutator is arch shaped, compressed with conical pressure rings and sleeves, then secured with nuts and fixed on the shaft with light pressure fit. The armature core is stacked with 0.5-thick D21 silicon steel plate laminations and pressed with ring keys and shaft steps through pressure rings The armature coil is a single wave type, made of 1.56 * 2.83 SBECB double glass wrapped wire. There are 4 main poles inside the machine base, without reversing poles. The main pole iron core is made of 0.5-thick D21 silicon steel plate laminations laminated and riveted with rivets. The coil is wound with 2.26 * 6.9 SBECB double glass wrapped wire The motor uses a rotating brush holder for replacing brushes and adjusting brush positions. There are 4 brush holders on the brush holder, each with a 10 * 25 * 40 D252 brush The lead wire of the motor is connected to the armature system through the electric brush and carbon brush holder, and then connected to the terminal block of the outlet box on the end cover, and then connected to the external power supply that is firmly clamped by the outlet box through a rubber sleeve. The main pole coil system is directly connected to the four insulated terminals on the output boards on both sides of the window, and then connected to the power cable that passes through the machine base wall, passes through rubber gaskets, sealing gaskets, and is fastened with threaded sleeves.

Technical parameters of ZQ-4-2/3.5KW DC traction motor

ZQ-4-2/3.5KW DC traction motor

[DC traction motor]ZD106 DC traction motor

2026-4-26 10:45:33

The ZD106 DC traction motor adopts a fully suspended welded base and a universal ZD109 armature punch plate. It is a high-power DC traction motor developed to meet the requirements of railway passenger transportation and further speed increase in China. The motor design and manufacturing have absorbed the latest technology of DC traction motors at home and abroad, adopting multiple new structures, processes, and materials. It has the characteristics of wide constant power range and high reliability, and can be used for Dongfeng 11 locomotives.

Rated Power: 530KW
Rated Voltage: 680V
Rated Current: 835A
Rated Speed: 955 r/min
Max Speed: 2385 r/min
Rated Efficiency: 93.4%
Max Voltage: 930V
Max Speed at Constant Power: 2285 r/min
Max Current: 1200A
Duty: s1
Min Current at Constant Current: 610A
Insulation class: H/H
Excitation Type: Series Excitation Serier Sound
Cooling Method: Forced Ventilation
Weight: 2500kg

[DC traction motor]ZD109 DC traction motor

2026-4-26 10:45:25

ZD109 (ZQDR-410C) DC traction motor is a four pole, forced draft, series excited DC traction motor for passenger and freight diesel locomotives. In terms of design and manufacturing, we have absorbed some advanced technologies from abroad, and adopted the most advanced vacuum pressure integrated coating technology in China. We also use a cast steel bearing frame, which is the prototype of the ZD109 series. This motor is mainly used on Dongfeng 4C diesel locomotives.

Main technical parameters of ZD109 DC traction motor:
Rated Power: 480KW
Rated Voltage: 645V
Rated Current: 800A
Rated Speed: 754 r/min
Max Speed: 2350 r/min
Rated Efficiency: 93%
Max Voltage: 870V
Max Speed at Constant Power: 1880 r/min
Max Current: 1110A
Duty: s1
Insulation class: H/F
Excitation Type: Series Excitation Serier Sound
Cooling Method: Forced Ventilation
Weight: 3060kg

[DC traction motor]ZD109A DC traction motor

2026-4-26 10:45:19

The ZD109A DC traction motor base adopts a steel plate welded structure, with a universal ZD109 armature and main and auxiliary pole coils. This motor is mainly used on Dongfeng 4D diesel locomotives and improved Dongfeng 4B locomotives

Main technical parameters of ZD109A DC traction motor:

Rated Power: 530KW
Rated Voltage: 670V
Rated Current: 845A
Rated Speed: 770 r/min
Max Speed: 2350 r/min
Rated Efficiency: 93%
Max Voltage: 930V
Max Speed at Constant Power: 1960 r/min
Max Current: 1200A
Duty: s1
Insulation class: H/H
Excitation Type: Series Excitation Serier Sound
Cooling Method: Forced Ventilation
Weight: 3060kg

[DC traction motor]ZD109B DC traction motor

2026-4-26 10:45:12

ZD109B DC traction motor is a type of DC traction motor used for high-power passenger and freight internal combustion engines. The motor has high power, wide constant power speed regulation range, and excellent commutation performance. Its structural characteristics are: the machine base adopts steel plate pressure welding machine base, and the rolling and holding bearing structure; To make it more suitable for railway heavy loads, this motor is mainly used on Dongfeng 4D diesel locomotives.

Main technical parameters of ZD109B DC traction motor:
Rated Power: 530KW
Rated Voltage: 670V
Rated Current: 845A
Rated Speed: 770r/min
Max Speed: 2385 r/min
Rated Efficiency: 93%
Max Voltage: 980V
Rated Air Flow: 110m3/min
Max Speed at Constant Power: 2190 r/min
Max Current: 1200A
Duty: s1
Insulation class: H/H
Excitation Type: Series Excitation Serier Sound
Cooling Method: Forced Ventilation
Weight: 2850kg

[DC traction motor]ZD109C DC traction motor

2026-4-26 10:45:04

ZD109C DC traction motor is a four pole forced draft series excited DC traction motor used for high-power freight diesel locomotives. Its structural characteristics are: the machine base adopts a welded machine base with retaining bearings and a sliding retaining bearing structure; The commutator end shaft head is equipped with a speed measuring gear plate, and the commutator bearing cover has a bearing temperature sensor installation port. At the same time, there are mounting holes for bearing temperature sensors on the bearing cover of the drive end of the commutator. The armature winding adopts thin film wire and NOMEX paper slot insulation structure; The main auxiliary pole coil adopts a pressure type integrated structure; Technologically, the stator and rotor are treated with vacuum pressure impregnation paint. This motor is mainly used on Dongfeng 8B internal combustion engines.

Main technical parameters of ZD109C DC traction motor:
Rated Power: 530KW
Rated Voltage: 670V
Rated Current: 845A
Rated Speed: 770r/min
Max Speed: 2385 r/min
Rated Efficiency: 93%
Max Voltage: 980V
Max Speed at Constant Power: 2190 r/min
Max Current: 1200A
Duty: s1
Insulation class: H/H
Excitation Type: Series Excitation Serier Sound
Cooling Method: Forced Ventilation
Weight: 3007kg

[DC traction motor]ZD109Z DC traction motor

2026-4-26 10:44:55

The ZD109Z DC traction motor is a product of the ZD109 type electric motor, which adopts a welded frame with holding bearings, domestically produced bearings, and universal ZD109B1. Mainly used for Dongfeng Chenpu D tuning and Dongfeng 10D tuning.

Main technical parameters of ZD109Z DC traction motor:
Rated Power: 530KW
Rated Voltage: 670V
Rated Current: 845A
Rated Speed: 770r/min
Max Speed: 2385 r/min
Max Voltage: 980V
Rated Air Flow 110m3/min
Max Speed at Constant Power: 2190 r/min
Max Current: 1200A
Duty: s1
Insulation class: H/H
Excitation Type: Series Excitation Serier Sound
Cooling Method: Forced Ventilation
Weight: 2780kg

[DC traction motor]ZD124 DC traction motor

2026-4-26 10:44:48

The ZD124 DC traction motor is installed on the locomotive bogie using a semi rigid suspension method. Its structural characteristics are: welded steel plate holding bearing base, H-grade insulated armature, commutator end, and transmission end bearing cover with bearing temperature sensor installation holes. It is a ZD109B structural improvement product. General ZD109 armature iron core and main auxiliary pole coil. Mainly used on improved Dongfeng 5 and DF7G locomotives.

Main technical parameters of ZD124 DC traction motor:
Rated Power: 530KW
Rated Voltage: 670V/980V
Rated Current: 845A/575A
Rated Speed: 770r/min
Rated Efficiency: 93%
Max Speed: 2385 r/min
Max Speed at Constant Power: 2190 r/min
Max Current: 1200A
Duty: s1
Insulation class: H/H
Excitation Type: Series Excitation Serier Sound
Cooling Method: Forced Ventilation
Weight: 2780kg

[DC traction motor]ZD126 DC traction motor

2026-4-26 10:44:39

The main characteristics of ZD126 DC traction motor are wide constant power speed regulation range, excellent commutation performance, and good universality. It is currently one of the largest power narrow gauge diesel locomotive traction motors in China. The machine base adopts a steel plate pressure welded bearing structure, the armature winding is horizontally arranged, the armature winding wire is made of Kapton film wire, and the ground insulation is made of NOMEX paper slot type insulation. The front end is tied with a non-woven tape, and the rear end is tied with non-magnetic tin plated steel wire. The brush holder adopts a reactive type, and the brush holder spring is a spiral compression spring. The motor uses excellent insulation materials, and the stator and rotor adopt vacuum pressure coating technology. This motor is mainly installed on meter gauge locomotives.

Main technical parameters of ZD126 DC traction motor:
Rated Power: 310KW
Rated Voltage: 500V
Rated Current: 680A
Rated Speed: 755r/min
Max Speed: 3100 r/min
Max Voltage: 1200V
Rated Air Flow 80m3/min
Rated Efficiency: 91.5%
Max Current: 1000A
Duty: s1
Insulation class: H/H
Excitation Type: Series Excitation Serier Sound
Cooling Method: Forced External Ventilation
Weight: 1640kg

[DC traction motor]ZQDR-310 DC traction motor

2026-4-26 10:44:32

The main characteristics of ZQDR-310 DC traction motor are wide constant power speed regulation range, excellent commutation performance, and good universality. It is currently one of the largest power narrow gauge diesel locomotive traction motors in China. The machine base adopts a steel plate pressure welding and bearing shell structure, the armature winding is horizontally arranged, the armature winding wire is made of Kapton film wire, and the ground insulation is made of NOMEX paper slot type insulation. The front end is tied with a non-woven tape, and the rear end is tied with non-magnetic tin plated steel wire. The brush holder adopts a reactive type, and the brush holder spring is a spiral compression spring. The motor uses excellent insulation materials, and the stator and rotor adopt vacuum pressure coating technology. This motor is mainly installed on meter gauge locomotives.

Main Specifications of ZQDR-310 DC Traction Motor
Rated Power: 310KW
Rated Voltage: 500V
Rated Current: 680A
Rated Speed: 755r/min
Max Speed: 3100 r/min
Max Voltage: 1200V
Rated Air Flow 80m3/min
Rated Efficiency: 91.5%
Max Current: 1000A
Duty: s1
Insulation class: H/H
Excitation Type: Series Excitation Serier Sound
Cooling Method: Forced External Ventilation
Weight: 1720kg

[DC traction motor]ZQ-21 DC traction motor

2026-4-26 10:44:25

Main technical parameters of ZQ-21 DC traction motor

Quota: hourly system
Rated power: 20.6KW
Rated voltage: 250V
Rated current: 95A
Rated speed: 600r/min
Maximum current: 190A
Maximum speed: 1400r/min
Insulation level: B
Excitation method: series excitation
Cooling type: Closed self cooling
Weight: 525Kg

ZQ-21 DC traction motor applicable motor model numbers: ZK7-6, 7, 9/250, ZK10-6, 9/250, ZK10-6, 7, 9/250-0 (1) overhead electric locomotive

[DC traction motor]XQ-4-4Y DC traction motor

2026-4-26 10:44:19

Main parameters of XQ-4-4Y DC traction motor

Product model: XQ-4-4Y
Voltage: 48V
Power: 4kW
Speed: 2800/min
Structural form: 19 tooth imperial involute internal spline, small flange

[DC traction motor]XQ-4-1 DC traction motor

2026-4-26 10:44:15

Main parameters of XQ-4-1 DC traction motor

Product model: XQ-4-1
Voltage: 48V
Power: 4kW
Speed: 3600/min
Structural form: 19 tooth imperial involute internal spline, small flange

[DC traction motor]XQ-3.8-3YT DC traction motor

2026-4-26 10:44:12

Main parameters of XQ-3.8-3YT DC traction motor

Product model: XQ-3.8-3YT
Voltage: 48V
Power: 3.8kW
Speed: 2800/min
Structural form: 19 tooth imperial involute internal spline, small flange

[DC traction motor]XQ-3.8YT DC traction motor

2026-4-26 10:44:08

Main parameters of XQ-3.8YT DC traction motor

Product model: XQ-3.8YT
Voltage: 48V
Power: 3.8kW
Speed: 3600/min
Structural form: 19 tooth imperial involute internal spline, small flange

[DC traction motor]XQ-3500 DC traction motor

2026-4-26 10:44:05

Main parameters of XQ-3500 DC traction motor

Product model: XQ-3500
Voltage: 48V
Power: 3.5kW
Speed: 1100/min
Structural form: Flat key output shaft, machine base with feet

[DC traction motor]XQ-3.5-6 DC traction motor

2026-4-26 10:44:01

Main parameters of XQ-3.5-6 DC traction motor

Product model: XQ-3.5-6
Voltage: 60V
Power: 3.5kW
Speed: 3600/min
Structural form: 18 tooth triangular internal spline

[DC traction motor]XQ-3.5 DC traction motor

2026-4-26 10:43:57

Main parameters of XQ-3.5 DC traction motor

Product model: XQ-3.5
Voltage: 48V
Power: 3.5kW
Speed: 2800/min
Structural form: 18 tooth triangular internal spline

[DC traction motor]XQ-3-18 DC traction motor

2026-4-26 10:43:54

Main parameters of XQ-3-18 DC traction motor

Product model: XQ-3-18
Voltage: 60V
Power: 3kW
Speed: 2800/min
Structural form: 18 tooth triangular internal spline

[DC traction motor]XQ-3-13 DC traction motor

2026-4-26 10:43:51

Main parameters of XQ-3-13 DC traction motor

Product model: XQ-3-13
Voltage: 72V
Power: 3kW
Speed: 2800/min
Structural form: 18 tooth triangular internal spline

[DC traction motor]XQ-3-11 DC traction motor

2026-4-26 10:43:47

Main parameters of XQ-3-11 DC traction motor

Product model: XQ-3-11
Voltage: 72V
Power: 3kW
Speed: 3600/min
Structural form: 18 tooth triangular internal spline

[DC traction motor]XQ-3-8D DC traction motor

2026-4-26 10:43:44

Main parameters of XQ-3-8D DC traction motor

Product model: XQ-3-8D
Voltage: 48V
Power: 3kW
Speed: 1600/min
Structural form: Flat key output shaft, machine base with feet

[DC traction motor]XQ-3-7YT DC traction motor

2026-4-26 10:43:40

Main parameters of XQ-3-7YT DC traction motor

Product model: XQ-3-7DF
Voltage: 48V
Power: 3kW
Speed: 2800/min
Structural form: 19 tooth imperial involute internal spline, small flange

[DC traction motor]XQ-3-7Y DC traction motor

2026-4-26 10:43:37

Main parameters of XQ-3-7Y DC traction motor

Product model: XQ-3-7Y
Voltage: 48V
Power: 3kW
Speed: 2800/min
Structural form: 19 tooth imperial involute internal spline, small flange

[DC traction motor]XQ-3-7DF DC traction motor

2026-4-26 10:43:33

Main parameters of XQ-3-7DF DC traction motor

Product model: XQ-3-7DF
Voltage: 48V
Power: 3kW
Speed: 2800/min
Structural form: 19 tooth imperial involute internal spline, small flange

[DC traction motor]XQ-3-5 DC traction motor

2026-4-26 10:43:30

Main parameters of XQ-3-5 DC traction motor

Product model: XQ-3-5
Voltage: 36V
Power: 3kW
Speed: 2800r/min
Structural form: 18 tooth triangular internal spline

[DC traction motor]XQ-3-3KF DC traction motor

2026-4-26 10:43:26

Main parameters of XQ-3-3KF DC traction motor

Product model: XQ-3-3KF
Voltage: 45/40V
Power: 3kW
Speed: 1800/1450r/min
Structural form: one cone and one flat shaft

[DC traction motor]XQ-3-3D1 DC traction motor

2026-4-26 10:43:23

Main parameters of XQ-3-3D1 DC traction motor

Product model: XQ-3-3D1
Voltage: 45/40V
Power: 3kW
Speed: 1800/1450r/min
Structural form: Cone out shaft

[DC traction motor]XQ-3-3 DC traction motor

2026-4-26 10:43:20

Main parameters of XQ-3-3 DC traction motor

Product model: XQ-3-3
Voltage: 45/40V
Power: 3kW
Speed: 1800/1450r/min
Structural form: Cone out shaft

[DC traction motor]XQ-3000-3 DC traction motor

2026-4-26 10:43:16

Main parameters of XQ-3000-3 DC traction motor

Product Model: XQ-3000-3
Voltage: 48V
Power: 3kW
Speed: 1500r/min
Structural form: Flat key dual output shaft, machine base with feet

[DC traction motor]XQ-2.5 DC traction motor

2026-4-26 10:43:13

Main parameters of XQ-2.5 DC traction motor

Product model: XQ-2.5
Voltage: 60V
Power: 2.5kW
Speed: 1800r/min
Structural form: Flat key output shaft, machine base with feet

[DC traction motor]XQ-2200-4 DC traction motor

2026-4-26 10:43:09

Main parameters of XQ-2200-4 DC traction motor

Product Model: XQ-2200-4
Voltage: 72V
Power: 2.2kW
Speed: 1000r/min
Structural form: 6-speed internal spline 6 * �� 20 * �� 25

[DC traction motor]XQ-2200-3E DC traction motor

2026-4-26 10:43:05

Main parameters of XQ-2200-3E DC traction motor

Product model: XQ-2200-3E
Voltage: 24V
Power: 2.2kW
Speed: 1650r/min
Structural form: Flat key dual output shaft, machine base with feet

[DC traction motor]XQ-2200 DC traction motor

2026-4-26 10:43:02

Main parameters of XQ-2200 DC traction motor

Product model: XQ-2200
Voltage: 24V
Power: 2.2kW
Speed: 1100r/min
Structural form: Flat key output shaft, machine base with feet

[DC traction motor]XQ-2.2-16 DC traction motor

2026-4-26 10:42:58

Main parameters of XQ-2.2-16 DC traction motor

Product Model: XQ-2.2-16
Voltage: 60V
Power: 2.2kW
Speed: 2800r/min
Structural form: 18 tooth triangular internal spline

[DC traction motor]XQ-2.2-14 DC traction motor

2026-4-26 10:42:55

Main parameters of XQ-2.2-14 DC traction motor

Product model: XQ-2.2-14
Voltage: 48V
Power: 2.2kW
Speed: 3600r/min
Structural form: 18 tooth triangular internal spline

[DC traction motor]XQ-2.2-13 DC traction motor

2026-4-26 10:42:52

XQ-2.2-13 DC Traction Motor Parameters

Product Model: XQ-2.2-13
Voltage: 72V
Power: 2.2kW
Speed: 2800r/min
Structural form: 18 tooth triangular internal spline

[DC traction motor]XQ-2.2-11E DC traction motor

2026-4-26 10:42:48

Main parameters of XQ-2.2-11E DC traction motor

Product model: XQ-2.2-11E
Voltage: 48V
Power: 2.2kW
Speed: 1650r/min
Structural form: Flat key dual output shaft, machine base with feet

[DC traction motor]XQ-2.2-11D DC traction motor

2026-4-26 10:42:45

Main parameters of XQ-2.2-11D DC traction motor

Product model: XQ-2.2-11D
Voltage: 48V
Power: 2.2kW
Speed: 1600r/min
Structural form: Flat key output shaft, machine base with feet

[DC traction motor]XQ-2.2-11 DC traction motor

2026-4-26 10:42:41

XQ-2.2-11 Main parameters of DC traction motor

Product model: XQ-2.2-11
Voltage: 48V
Power: 2.2kW
Speed: 1600r/min
Structural form: The output shaft is an 18 tooth triangular internal spline

[DC traction motor]XQ-2.2-8 DC traction motor

2026-4-26 10:42:38

Main parameters of XQ-2.2-8 DC traction motor

Product Model: XQ-2.2-8
Voltage: 36V
Power: 2.2kW
Speed: 1500r/min
Structural form: The output shaft is a 6-speed external spline with a diameter of 4 °�� 16 and a diameter of 20

[DC traction motor]XQ-2.2-7 DC traction motor

2026-4-26 10:42:34

Main parameters of XQ-2.2-7 DC traction motor

Product Model: XQ-2.2-7
Voltage: 60V
Power: 2.2kW
Speed: 3600r/min
Structural form: 18 tooth triangular internal spline

[DC traction motor]XQ-1800 DC traction motor

2026-4-26 10:42:31

Main parameters of XQ-1800 DC traction motor

Product model: XQ-1800
Voltage: 60V
Power: 1.8kW
Speed: 1600r/min
Structural form: Flat key output shaft, machine base with feet

[DC traction motor]XQ-1500-8 DC traction motor

2026-4-26 10:42:27

Main parameters of XQ-1500-8 DC traction motor

Product model: XQ-1500-8
Voltage: 36V
Power: 1.5kW
Speed: 2800r/min
Structural form: 18 tooth triangular internal spline

[DC traction motor]XQ-1500-7 DC traction motor

2026-4-26 10:42:23

Main parameters of XQ-1500-7 DC traction motor

Product model: XQ-1500-7
Voltage: 24V
Power: 1.5kW
Speed: 2000r/min
Structural form: 18 tooth triangular internal spline

[DC traction motor]XQ-1500-4 DC traction motor

2026-4-26 10:42:19

Main parameters of XQ-1500-4 DC traction motor

Product model: XQ-1500-4
Voltage: 24V
Power: 1.5kW
Speed: 1500r/min
Structural form: 1:8 cone exit shaft (double exit shaft)

[DC traction motor]XQ-1500-3 DC traction motor

2026-4-26 10:42:16

Main parameters of XQ-1500-3 DC traction motor

Product model: XQ-1500-3
Voltage: 24V
Power: 1.5kW
Speed: 1100r/min
Structural form: 1:10 tapered shaft

[DC traction motor]XQ-1400 DC traction motor

2026-4-26 10:42:13

Main parameters of XQ-1400 DC traction motor

Product model: XQ-1400
Voltage: 22V
Power: 1.4kW
Speed: 1200r/min
Structural form: 1:10 tapered shaft

[DC traction motor]XQ-1000 DC traction motor

2026-4-26 10:42:09

Main parameters of XQ-1000 DC traction motor

Product model: XQ-1000
Voltage: 48V
Power: 1kW
Speed: 1500r/min
Structural form: Flat key output shaft, machine base with feet

[DC traction motor]XQ-4-4YT DC traction motor

2026-4-26 10:42:05

Main parameters of XQ-4-4YT DC traction motor

Product model: XQ-4-4YT
Voltage: 48V
Power: 4kW
Speed: 2800/min
Structural form: 19 tooth imperial involute internal spline, small flange

[DC traction motor]XQ-4000-1C DC traction motor

2026-4-26 10:42:02

Main parameters of XQ-4000-1C DC traction motor

Product model: XQ-4000-1C
Voltage: 48V
Power: 4kW
Speed: 2800/min
Structural form: 18 tooth triangular internal spline

[DC traction motor]XQ-4000-1DF DC traction motor

2026-4-26 10:41:58

Main parameters of XQ-4000-1DF DC traction motor

Product model: XQ-4000-1DF
Voltage: 48V
Power: 4kW
Speed: 2800/min
Structural form: 19 tooth imperial involute internal spline, large circular flange

[DC traction motor]XQ-4.2-2T DC traction motor

2026-4-26 10:41:55

Main parameters of XQ-4.2-2T DC traction motor

Product model: XQ-4.2-2T
Voltage: 48V
Power: 4.2kW
Speed: 2800/min
Structural form: 18 tooth triangular internal spline

[DC traction motor]XQ-4.2-2D DC traction motor

2026-4-26 10:41:52

Main parameters of XQ-4.2-2D DC traction motor

Product model: XQ-4.2-2D
Voltage: 48V
Power: 4.2kW
Speed: 2800/min
Structural form: 18 tooth triangular internal spline (equipped with Qingzhou Bridge)

[DC traction motor]XQ-4.2-3D DC traction motor

2026-4-26 10:41:48

Main parameters of XQ-4.2-3D DC traction motor

Product model: XQ-4.2-3D
Voltage: 72V
Power: 4.2kW
Speed: 2800/min
Structural form: Flat key output shaft, machine base with feet

[DC traction motor]XQ-4.2-6D DC traction motor

2026-4-26 10:41:45

Main parameters of XQ-4.2-6D DC traction motor

Product Model: XQ-4.2-6D
Voltage: 48V
Power: 4.2kW
Speed: 1600/min
Structural form: Flat key output shaft, machine base with feet

[DC traction motor]XQ-4.2-6E DC traction motor

2026-4-26 10:41:42

Main parameters of XQ-4.2-6E DC traction motor

Product Model: XQ-4.2-6E
Voltage: 48V
Power: 4.2kW
Speed: 1600/min
Structural form: Flat key dual output shaft, machine base with feet