MPD-1 Single disk desktop metallographic grinding and polishing machineDetailed product description：

The MPD-1 single disc desktop metallographic grinding and polishing machine is a high-performance equipment that uses an AC frequency converter as the speed control power for sample grinding and polishing. It can be selected according to different speeds to perform rough grinding, fine grinding, and polishing on sample workpieces.

Connect the power to the thin switch and the meter will display a luminous speed value of 1000 (pulse jumping). Install the grinding disc and select the required metallographic water-resistant sandpaper or metallographic sand polishing agent for the workpiece

Select the run button, and the grinding or throwing disc will start running. At this point, the number of lights will also increase from 0 to 1000 RPM. If low-speed operation is required, simply press and hold the touch point, and the motor will gradually decrease the set value you need. When high-speed operation is required, simply press. When pre grinding, first turn on the faucet switch, then hold the workpiece with your hand and lightly press it onto the grinding disc for rough grinding and fine grinding to achieve a smooth finish.

When polishing with the MPD-1 single disc desktop metallographic polishing machine, water is generally not required. Simply spray metallographic sand polishing agent on the polishing surface, and then polish. After a certain period of polishing, a shiny and new sample surface can be obtained.

Grinding disc diameter	￠230mm
Grinding disc speed	0-1500r/min
Motor power	350W
power supply voltage	220V,50HZ
Overall dimensions	380*650*330mm
Weight	42kg