CS600BT series Hall current sensorDetailed product description：

Product Description: How to Translate
A current sensor based on the open-loop principle of Hall effect can measure currents of DC, AC, pulse, and various irregular waveforms under electrically isolated conditions.

Electrical parameters

	model	CS030BT	CS050BT	CS100BT	CS200BT	CS300BT	CS400BT	CS500BT	CS600BT
IPN	Primary rated input current	thirty	fifty	one hundred	two hundred	three hundred	four hundred	five hundred	six hundred	A
IP	Measurement range of primary current	0～±60	0～±100	0～±200	0～±400	0～±600	0～±800	0～±900	0～±900	A
VOUT	Rated output voltage on the secondary side	± 1 (± 1%) or ± 2 (± 1%)								V
VC	power supply voltage	+5V (± 5%) or+12 (± 5%)								V
IC	Current consumption	twenty-five								mA
Vd	insulation voltage	Effective value of 2.5KV/50Hz/1 minute between the primary and secondary circuits
εL	linearity	±1								%FS
V0	Zero offset voltage	TA =25℃  2.5V±1%								V
VOM	Magnetic misalignment voltage	IPN→0  <±20								mV
VOT	Unbalanced voltage temperature drift	IPN=0  TA =-25～+85℃  <±1								mV/℃
Tr	response time	≤3								μs
f	Band width (-3dB)	DC～20								kHz
TA	Working environment temperature	-25～+85								℃
TS	Storage environment temperature	-40～+100								℃
RL	load resistor	≥10K								Ω
	standard	Q/3201CHGL02-2007

Dimensions (mm)

Instructions for Use
1. Incorrect wiring may cause damage to the sensor. After the sensor is powered on, when the measured current passes through the direction of the sensor arrow, the in-phase voltage value can be measured at the output terminal.
2. The output amplitude of the sensor can be adjusted appropriately according to user needs.
3. Sensors with different rated input currents and output voltages can be customized according to user needs.
4. The measurement range of the primary current is at the rated output voltage of 1V.