CS600BT3 Hall current sensorDetailed product description：

The CS600BT3 Hall current sensor, which applies the open-loop principle of Hall effect, can measure currents of DC, AC, pulse, and various irregular waveforms under electrical isolation conditions.

Electrical parameters of CS600BT3 Hall current sensor

	model	CS0100BT3	CS200BT3	CS300BT3	CS400BT3	CS500BT3	CS600BT3
IPN	Primary rated input current	one hundred	two hundred	three hundred	four hundred	five hundred	six hundred	A
IP	Measurement range of primary current	0～±100	0～±200	0～±300	0～±400	0～±500	0～±600	A
VSN	Rated output voltage on the secondary side	2±1%						V
Vref	reference voltage	3±2%						V
VC	power supply voltage	+12(±5%)						V
IC	current consumption	twenty						mA
Vd	insulation voltage	3KV effective value/50Hz/1 minute between the primary and secondary circuits
εL	linearity	±1						%FS
V0	Zero point electrical offset voltage	TA=25℃ <±10						mV
VOM	Zero point magnetic offset voltage	IPN→0 <±10						mV
VOT	Unbalanced voltage temperature drift	IPN=0 TA=25～85℃ <±1.5			IPN=0 TA=-25～25℃ <±1			mV/℃
VST	Gain voltage temperature drift	IPNTA=25～85℃ <±1.5			IPNTA=-25～25℃ <±1			mV/℃
Tr	response time	≤3						μs
f	Band width (-3dB)	DC～50						kHz
di/dt	Follow accuracy	>50						A/us
TA	Working environment temperature	-25～+85						℃
TS	Storage environment temperature	-40～+100						℃
RL	load resistor	≥10K						Ω
m	weight	About 75						g

Dimensions (mm)

Pin Description:
1. Red line VCC+12V 2, black line 0V power ground 3, brown line Vout output 4, orange line Vref 3V reference voltage OFS, zero point adjustment GIN gain adjustment

Instructions for Use
1. Incorrect wiring may cause damage to the sensor. After the sensor is powered on, when the measured current passes through the direction of the sensor arrow, the in-phase voltage value can be measured at the output terminal.
2. The output amplitude of the sensor can be adjusted appropriately according to user needs.
3. Sensors with different rated input currents and output voltages can be customized according to user needs.