CJ2A series electric motor operating mechanismDetailed product description：

The CJ2A series electric motor operating mechanism is an outdoor power type mechanism. The deceleration part adopts two-stage worm gear reduction, which is integrated with the electric motor and directly driven by the electric motor to drive the worm gear transmission. Its manufacturing process and design technology adopt advanced and mature domestic and international technologies, and it has the advantage of smooth and noise free transmission. The box adopts stainless steel riveting technology, which is beautiful and durable, fully in line with the standardized requirements of the power department, and can improve the reliability of isolation operation at the beginning.

Environmental conditions for use
Surrounding cold air temperature: maximum+40 ℃; The minimum temperature is -40 ℃;  
Ice thickness: not exceeding 10mm
Sunshine radiation intensity: ≤ 1000W/m2;  
Wind speed not exceeding 34m/s;  
Altitude not exceeding: 1000m
Seismic intensity: not exceeding 8 degrees;  
Pollution level: Level III, Level IV;  
The amplitude of electromagnetic interference induced in the secondary system shall not exceed 1.6KV.

Characteristics of operating mechanism
1. Practicality
The mechanism adopts two-stage worm gear reduction, with smooth operation, low impact force, low noise, and reliable self-locking performance;  
The mechanism can be easily operated locally or remotely by connecting the power supply. The electric motor outputs torque through two-stage worm gear reduction, driving the isolation switch or grounding switch to accurately and reliably achieve closing and opening actions;  
Use micro switches to control the output angle and final opening and closing positions of the operating mechanism. Using the transmission principle of worm and worm gear to ensure the output torque and speed of the output shaft;  
The mechanism can achieve both electric and manual operation, and the electric and manual operations can be interlocked;  
The box is made of stainless steel riveted structure, which has a beautiful appearance, reasonable structure, and reliable waterproof, dustproof, anti-corrosion, and rust prevention functions. It can adapt to various regions and is lighter and more aesthetically pleasing compared to traditional welding and bolt connection structures;  
The contactor in the secondary element adopts the structure with protective cover to prevent misoperation caused by accidental touch
2. Economic viability
It can be operated with just a regular power supply, without the need for any other auxiliary equipment;  
This operating mechanism has a simple structure, easy maintenance, high standardization of components, few self-made parts, and strong interchangeability;  
The bearings and two-stage worm gear reducers within the organization are sealed structures that can be lubricated without grease, achieving maintenance free operation;  
The product is durable and reasonably priced.

Ordering Instructions
Please specify when placing an order:
1. Institution model;
2. Motor power supply voltage and control circuit power supply voltage and power supply properties;
3. Auxiliary switch connection points (generally divided into 6 open and 6 closed, 8 open and 8 closed, 10 open and 10 closed, 12 open and 12 closed, if not specified, supplied according to 6 open and 6 closed); Note: The number of auxiliary switch connections for manually operated mechanisms is: 4 open and 4 close, 6 open and 6 close, and 8 open and 8 close.
4. Electric heater input method (if not specified, manual input method shall be used for supply);
5. If there are special requirements, negotiate with the manufacturer.

CJ2A series electric motor operating mechanism