Number

SR92 is a 0.3 level PID intelligent regulator with dual four position display, dual output, analog transmission output, digital communication, disconnection alarm, upper and lower limit alarm and other functions. The front panel protection level is IP66.

SR92-

DIN standard: height 72 x width 72 x depth 110mm, panel opening size 68 x 68mm

Input type and measurement range

(Display range of DC input type -1999-9999 and decimal point position can be set)

eight

free input

Thermocouple: B:0～1800,R:0～1700,S:0～1700,K1:100.0～400.0,K2:0.0～800.0,K3:-200～1200,E:0～700,J:0～600,T:-199.9～200.0,N:0～1300,PLII:0～1300,Wre5-26:0～2300,U:-199.9～200.0,L:0～600 ℃

Pt100 platinum resistance: -200~600, -100.0~100.0, -50.0~50.0, 0.0~200.0 ℃ (JPt100 omitted)

DC millivolt -10~10, 0~10, 0~20, 0~50, 10~50, 0~100mV

four

DC current: 0-20mA, 4-20mA, input impedance: 250 Ω

six

DC voltage: -1~1, 0~1, 0~2, 0~5, 1~5, 0~10V Input impedance: 500K Ω

Adjust output (1) type

Y-

Relay contact, proportional cycle 1-120 seconds, contact capacity: 240V AC 2A resistive

I-

Current 4-20mA DC, load impedance<600 Ω

P-

Solid state relay drive, proportional cycle 1-120 seconds, 12 ± 1.5V DC/maximum 30mA

V-

Voltage 0-10V DC, load current<2mA

Adjust output (2) type

Positive and negative effects can be set

(Optional)

N-

nothing

Y-

Relay contact, proportional cycle 1-120 seconds, contact: 240V AC 2A resistive

I-

Current 4-20mA DC, load impedance<600 Ω

P-

Solid state relay drive, proportional cycle 1-120 seconds, 12V ± 1.5V DC/maximum 30mA

V-

Voltage 0-10V DC, load current<2mA

power supply

90-

100～240V  AC±10%(50/60Hz)

08-

24V AC/DC±10%(50/60Hz)

Event output (optional)

(When the heater is disconnected, only the output (1) can be adjusted. It is optional when it is a Y-shaped/P-type output.)

0

nothing

one

Event output: EV1, EV2 Contact: 240V AC 1A/resistive

two

Event output: EV1 and 30A heater disconnection alarm (contact: 1.5A/resistive)

three

Event output: EV1 and 50A heater disconnection alarm (contact: 1.5A/resistive)

Isolation analog transmission (optional)

0

nothing

three

0～10mV DC, Output impedance: 10 Ω

four

4～20mA DC, Load impedance<300 Ω

six

0～10V DC, Load current<2 mA

Digital communication interface or dual set value (SB)

(Choose one)

0

nothing

five

RS485 address: 1-255

seven

RS232C

eight

1 point (range: -1999~5000), no voltage contact or OC gate input