KMM Programmable RegulatorDetailed product description：

KMM programmable regulator is a digital regulator that distributes functions to a single circuit, and is a precision instrument with PID control function and various other auxiliary functions.

Main Technical Instructions for KMM Programmable Regulator
Input and output parts

project				specification
Input section	Analog input	Input points		five o'clock
		input voltage		1～5V d.c
		Input bias current		-Below 1 μ A
		input method		Differential input
		Maximum allowable input voltage		DC+30V maximum
	Digital input	Input points		5 points (programmable 4 points, external interlocking signal 1 point)
		input voltage		LOW 0～4V，HIGH 10～30V
		Input bias current		LOW~3mA below, HIGH10 μ A below
		Maximum allowable input voltage		DC30V maximum
Output section	analog output	voltage output	Output points	three o'clock
			output voltage	DC 1～5V
			output impedance	250Ω
			output method	Differential type
		current output	Output points	1 point (converting one point of voltage output into current through V/I conversion)
			output current	DC4～20mA
			output impedance	250KΩ
			Allowable load	600Ω
			output method	Negative end shared
	Digital output	Output points		4 pieces (programmable 3 points, standby state output 1 point)
		output method		Transistor output (open collector)
		Contact capacity		DC 30V； 0.1A (resistive load)

KMM Programmable Regulator General Specifications

Basic model		Select Specification		Additional specifications			content
		I	II	I	II	III
KMM							Programmable controller
	two hundred and eleven						Mask type automatic/manual/cascade SP can operate and self tune
		0					Main power supply DC24V
			0				PROM is pre made by the user
			one				Made by the manufacturer
				0			No communication interface
				one			There is a communication interface
					0		No data setter
					one		There is a data setter
						0	No backup manual unit available
						one	There is a backup manual unit (preset type)
						two	There is a backup handheld unit (tracking type)