24-2200W Straight axis double curved surface reduction motorDetailed product description：

Characteristics of 24-2200W orthogonal axis double curved surface reduction motor:

1. Small backlash: The backlash is very small, which can achieve stable optimal load balance.
2. Compact structure: Three curved plates are used to distribute the load, making the structure more compact.
3. High speed shaft support type: The high-speed shaft is supported by bearings, so there is no need to add parts to meet the requirements of radial load specifications.
4. Low vibration: Three curved plates achieve optimal load balance. This stable performance greatly reduces vibration.
5. Good rigidity: Due to the increase in the number of output pins and the dispersion of the load, the rigidity has been improved.
6. High efficiency: The rolling contact mechanism and optimal load balance improve efficiency.
7. Long service life: The tooth profile with a continuous curve has a large number of simultaneous meshing, resistance to impact force, and high carbon chromium bearing steel with excellent wear resistance and fatigue resistance is used in the main reduction mechanism, which can extend the service life.
8. Easy to maintain: The deceleration part can be separated from the output side flange, making maintenance very convenient.
9. Good assembly: Because it is sealed with lubricating grease, it can be directly assembled onto the device.

Installation form of 24-2200W orthogonal axis double curved reduction motor:
1. Foot installation, shaft output or hole output;
2. Flange installation, shaft output or hole output;
3. Side screw hole installation, shaft output or hole output.

Motor power: 24W, 40W, 60W, 90W, 100W, 120W, 200W, 400W, 750W, 1500W, 2200W
Voltage: three-phase or single-phase, 220V/380V, 50HZ/60HZ
Can be equipped with brakes or speed controllers
Reduction ratio: 1/5-1/240