Characteristics and uses of YTDP series elevator motors:

The electric motor has a set of working windings, a protection level of IP01 for the outer shell, and an IC01 cooling method. The motor can be made into a horizontal foot mounting type or a flange mounting type, with a power range of 7.5kW to 40kW. The electric motor is suitable for variable frequency speed regulation elevators and can be installed on various mechanical deceleration traction machines. It can be used in conjunction with various types of frequency converters at home and abroad, and can meet the working conditions of frequent starting and braking up to 240 times per hour.

Motor performance:

The electric motor is suitable for variable frequency speed regulation elevators and can be used in conjunction with various types of variable frequency devices at home and abroad. It can meet the working conditions of frequent starting and braking up to 240 times per hour.
The insulation level of the electric motor is Class F.
The effective value of the vibration velocity measured by the motor under no-load condition with half key on the shaft extension shall not exceed 1.12mm/s.
The A-weighted sound pressure level (Lp) noise measured by YTDP series elevator motors under no-load conditions does not exceed 70dB (A).

Model description:


Structure Introduction:

The YTDP series elevator motor has a set of working windings.
The protection level of the motor casing is IP01.
The cooling method of the electric motor is self fan cooling, which complies with the regulations of IC01.
The electric motor can be made into a horizontal foot mounting type (IM1002) or a flange mounting type (IM3002).
The electric motor adopts rolling bearings.
On the extension of the secondary shaft of the electric motor, users can install a rotary encoder themselves; In addition, other special shaft extension sizes can also be made according to user requirements.

Note:

Please pay attention to the model, power, rated voltage, rated frequency, number of poles, and installation structure of the electric motor when placing an order.
For variable frequency elevator motors, it is also necessary to indicate what kind of encoder is installed, whether a thermistor is required, and what kind of thermistor is needed. If there are special requirements for motor power, rated voltage, rated frequency, number of poles, etc., please specify them when placing an order.

YTDP270 Type Three phase Asynchronous Motor Horizontal Foot Installation Type for Variable Frequency Speed Control Elevator (IM1002)



YTDP270 Type Three phase Asynchronous Motor Horizontal Flange Installation Type for Variable Frequency Speed Control Elevator (IM3002)


YTDP335 Type Three phase Asynchronous Motor Horizontal Foot Installation Type for Variable Frequency Speed Control Elevator (IM1002)


YTDP335 Type Three phase Asynchronous Motor Horizontal Flange Installation Type for Variable Frequency Speed Control Elevator (IM3002)

YTDP series elevator motor