JF15B,TP8B16(DHC15B) Rail type multifunctional programmable timerDetailed product description：

summary:
1. 35mm standard guide rail installation, compact size, beautiful appearance, is an updated product of KG316T;
2. Real time control, 7-day or 24-hour preset cycle timing control;
3. One output, 8-stage on/off timing settings, 10 date combination modes;
4. The longest setting is 168 hours, and the shortest timing is 1 minute;
5. LCD display, backup high-capacity rechargeable battery, normal operation during power outage;
6. Switch between 12/24 hours, default is 24 hours.

Model Description



JF15B, TP8B16 (DHC15B) rail type multifunctional programmable timer technical parameters

Rated control voltage: AC220V ± 10% 50Hz	Number of contacts: 1 set for conversion	Timing error: ≤ 2 seconds/day (25 ℃)
Switching frequency: 8 times on and 8 times off	Power consumption: 4.5VA (max)	Time control range: 1 minute to 168 hours
Power outage duration ≥ 15 days (after continuous power on for 48 hours)		Minimum timer time: 1 minute
Contact capacity: Resistive load: 16A/250VAC (COS φ=1); Inductive load: 2.5A/250VAC (COS φ=0.6); Control light: 1000W		Electrical lifespan: 100000 cycles (rated load) Mechanical lifespan: 1 million cycles
Environmental temperature: 35-85% RH	Operating environment temperature: -10~55 ℃	Weight: Approximately 125g

Operating instructions
1. To start using the timer, please connect the rated control power supply and press the reset button "RESET".
2. Set the timer for the first time in 24-hour mode. If you want to switch to 12 hour mode, press and hold the "" key for 5 seconds, and the LCD will display "AM"; If you want to switch to 24-hour mode, please hold down the "" key for 5 seconds to return to 24-hour mode.
3. Programming Settings

step	button	Programming Content
one	Press' P '	When "1ON" appears, set the first group activation time;
2*	Press' D+'	Set a day or days of the week to activate;
three	Press' H+/M+'	Set the hours and minutes for the activation time;
four	Press' P '	Display "1OFF" and display "", set the first group shutdown time
five	Press' P '	Set a day or days of the week to close;
six	Press' H+/M+'	Set the hour and minute when closing;
seven	Repeat steps 2-6	Set 2-8 sets of timed activation and deactivation times;
8**	Press“”	Setup completed

Note:
To cancel a certain timing setting, please press the "MANUAL" button, and the LCD will display "----=----"; Pressing the 'MANUAL' key again will return to the previous settings.
*10 date combination modes: (1. MO TU WE TH FR SA SU; 2. MO TU WE TH FR; 3. SA SU; 4. MO; 5. TU; 6. WE; 7. TH; 8. FR; 9. SA; 10. SU).
**If you do not need to set the 8-segment timer, please press "" to complete the setting and return to the real-time clock state.
4. Real time clock setting
(1) Simultaneously press "" and "D+" to set up rounding until the current week is displayed;
(2) Simultaneously press "" and "H+" to set up rounding until the current hour is displayed;
(3) Simultaneously press "" and "M+" to set up rounding until the current minute is displayed;
(4) Press' MANAUL 'to display' ON AUTO 'or' AUTO OFF '; If the automatic timing initial state needs to be turned on, select "ON AUTO"; if the automatic timing initial state needs to be turned off, select "AUTO OFF".
5. Press "MANAUL" to change the switch state, "ON" for long on, "OFF" for long off.

Overall dimensions

Note:
The date mode for setting the opening and closing time of the same period should be consistent;
Use according to the requirements specified in the technical parameters;
Internally containing high-capacity rechargeable batteries, please do not disassemble or put into fire.