WDZS1 series miniature electromagnetic power-off brakeDetailed product description：

1、 Introduction to Applications
The Wdzs1 series miniature electromagnetic power-off brake is a friction brake that is powered on and released, and powered off by spring braking. It is widely used in mechanical transmission systems such as automatic doors, stages, medical equipment, and office equipment to achieve fast parking and accurate positioning.
This brake has the advantages of compact structure, easy installation, wide adaptability, low noise, high working frequency, sensitive action, stable and reliable braking, and is an ideal automation actuator.

2、 Performance parameters of WDZS1 series miniature electromagnetic power-off brake MainTechnical Data

Specifications Data Contents	WDZS1-0.2	WDZS1-0.4	WDZS1-1.0	WDZS1-2.0
Rated torque Rated Torque(N.m)	zero point two	zero point four	one	two
Rated power P20 ℃ Rated Power(W)	six	eight	ten	eleven
Rated voltage Rated Voltage(VDC)	12. 24, 96	12. 24, 96	12. 24, 96	12. 24, 96
Connection time Connecting Time(ms)	thirty-five	thirty-seven	thirty-nine	forty-two
Disconnect time Disconnecting Time(ms)	fifteen	sixteen	eighteen	twenty
Allow maximum speed Allowable Max Speed(rpm)	five thousand	five thousand	five thousand	five thousand

3、 Appearance and installation dimensions

Size Specification Specifications

d

D

D1

D2

L

L1

L2

L3

h

b

H

M

b1

B

δ

WDZS1-0.2

six

forty

forty-seven

thirteen

ten

twenty-seven point three

eighteen

four

--

--

seventeen

three

three point five

ten

zero point two

WDZS1-0.4

six

forty-nine

fifty-eight

nineteen

twelve

thirty point one

eighteen

five

--

--

twenty-one

three

three point five

fourteen

zero point two

WDZS1-1.0

eight

sixty

sixty-nine

thirty-six

fourteen

thirty-three point two

twenty

five

nine point four

three

twenty-six

three

three point five

eighteen

zero point two five

WDZS1-2.0

ten

seventy-three

eighty-three

thirty-five

fifteen

thirty-three point two

twenty

five

eleven point eight

four

thirty-two

four

five

twenty-five

zero point two five

4、 Installation precautions Installation Warning
The friction plate and the surface of the armature should be kept clean and free of oil stains;
The air gap of the brake has been adjusted to the normal working air gap when it leaves the factory, and does not need to be readjusted during installation.

5、 Installation diagram

1. Motor end cover
2. Install screws
3. Installation board
4. Brake disc
5. Armature
6. Shaft sleeve
7. Magnetic yoke components

WDZS1 series miniature electromagnetic power-off brake