| Product name: | LZZBJ9-36/250W1-2 series current transformers | ||||||
| specification: | ![]() |
||||||
| Category: | High voltage electrical appliances -- 35KV Current Transformer | ||||||
| Price: | factory price | ||||||
| Brand: | Shanghai | ||||||
| Place of Origin: | China | ||||||
| Available Quantity: | batch | ||||||
| delivery cycle: | Spot goods (or inquire by telephone) | ||||||
|
|||||||
I. Overview
The LZZBJ9-36/250W1-2 series current transformer is suitable for current and energy measurement and relay protection in AC lines with rated frequency of 50, 60Hz, rated voltage of 35kV and below indoor devices.
The LZZBJ9-36/250W1-2 series current transformer is a fully enclosed and maintenance free product made by one-time casting of epoxy resin. It has the advantages of strong short-circuit resistance and high accuracy.
Structure Introduction
The primary and secondary coils of LZZBJ9-36/250W1-2 series current transformers have a chain structure,. The metrological grade iron core is made of ultrafine crystalline alloy, and the protective grade iron core is made of high-quality silicon steel sheets rolled. The secondary wires are evenly wound on the iron core. The primary coil is made of high-quality soft copper strip or glass wire enameled wire.
The casting body is fixed on the installation base with bolts. A nameplate is affixed to the casting body. There are four screw holes on the bottom plate for users to install and use. There are dedicated grounding bolts on the base plate.
3、 Applicable conditions (if you want to order a product that is applicable beyond the following scope, please consult with me to determine)
1. Equipment type: indoor;
2. The altitude of the installation site shall not exceed 1000m;
3. Environmental temperature: -5 to+40 ℃;
4. Pollution level: Level III
5. There is no pollution, corrosive or explosive medium in the air that seriously affects the insulation performance of the transformer.
4、 Technical data (if you want to order product technical data beyond the following range, please consult with me to determine)
1. The product complies with IEC and GB1208-97 "Current Transformers";
2. Rated insulation level: 40.5/95/200kV;
3. Rated frequency: 50, 60Hz;
4. Rated secondary current: 1A, 5A;
5. Load power factor: COS φ=0.8 (lag);
6. The product is allowed to operate for a long time at 120% of the rated current;
7. The rated output and dynamic thermal stability current can be found on the product nameplate.
LZZBJ9-36/250W1-2 series current transformer