ZJ-10Q type full working condition insulator with epoxy resin casting structure supporting insulator
purpose
Suitable for supporting and fixing busbars and conductors with electronic meters in electrical equipment with a rated voltage of 10kV and below, and ensuring sufficient insulation between live conductors or conductors and the ground, used in central switchgear and other switchgear.

Model meaning



Main technical parameters and external installation dimensions
1. Rated voltage: 10kV;
2. Maximum voltage: 12kV;
3. The power frequency withstand voltage that the insulator should be able to withstand (effective value): 42kV for 5 minutes; Lightning impulse withstand voltage (peak): 75kV;
4. The appearance and installation dimensions of the insulator are shown in the attached diagram.
Structure Introduction
The insulator is cast with epoxy resin, which is resistant to pollution and moisture, and does not require special maintenance. It only needs to be regularly cleaned of surface dirt, and there are threaded holes at both ends for installation.
Terms of Use
1. Indoor installation;
2. Altitude not exceeding 1000m;
3. The surrounding temperature ranges from+40 ℃ to -5 ℃;
4. When the air temperature is+20 ℃ and the relative humidity does not exceed 100%;
5. Places without gas, steam, dust, or other explosive and corrosive media that seriously affect the insulation of insulators.

ZJ-10Q type supports insulators