The T940H electric rotary control valve is mainly composed of valve body, sleeve, valve disc, valve stem and other parts. Both the sleeve and the valve disc are equipped with throttling holes to change the flow area and regulate the flow rate by rotating the valve disc inside the valve seat. Equipped with ZKJ or other types of electric angular stroke actuators, remote control and automatic control can be achieved. This series of regulating valves is suitable for nominal pressure: 1.6-10MPa/cm2, working temperature: T940H-40, ≤ 425 ℃, T940H-100 type ≤ 425 ℃, suitable for medium in water pipelines, installed on low, medium pressure, medium pressure boiler feedwater or high pressure boiler drainage pipelines. The feedwater regulating valve is installed on the boiler feedwater pipe to regulate the feedwater flow rate to meet the needs of boiler and load operation.
Structural characteristics:
1. The electric rotary control valve is mainly composed of valve body, sleeve, valve disc, valve stem and other parts. Both the sleeve and the valve disc are equipped with throttling holes to change the flow area and regulate the flow rate by rotating the valve disc inside the valve seat. Equipped with ZKJ or other types of electric angular stroke actuators, remote control and automatic control can be achieved.
Electric rotary control valves are widely used in water supply pipelines to regulate flow. It can also be used in oil pipelines.
Performance parameters:
|
Rated pressure (Mpa) |
one point six |
two point five |
four |
six point four |
ten |
sixteen |
|
Shell test pressure (Mpa) |
two point four |
three point seven five |
six |
nine point six |
fifteen |
twenty-four |
|
Maximum import pressure (Mpa) |
one point six |
two point five |
four |
six point four |
ten |
sixteen |
|
flow characteristics |
Linear or equal percentage |
|
leakage |
GB10869-1989 (Grade I) |
Main component materials:
|
Part Name |
Part material |
|
valve body |
WCB |
|
Valve cover bottom cover |
WCB |
|
valve seat |
2Cr13 |
|
valve disc |
2Cr13 |
|
valve stem |
2Cr13 |
|
filler |
flexible graphite |