LKI-2 type inductor groupDetailed product description：

The LKI-2 inductor group includes 10 different inductors, suitable for use with WY2853 series (>100MHz) Q-meters or other similar Q-meters. Among them, two inductors are dedicated to measuring tg δ and ε in conjunction with the WY914 loss angle testing fixture

This inductance group has a high Q value and good stability, which enables the high-frequency Q meter to obtain sharp resonance points during measurement, thereby increasing its measurement accuracy. The inductance and Q value data of each inductor are shown in the following table:

Inductance number	inductance		Q value ≥	Approximate value of distributed capacitance (PF)	remark
	standard value	accuracy
LK-1	0.1μH	±0.02μH	two hundred and fifty	five	*LK-3 is specifically designed for measuring ε and tg δ at 15MHz *LK-9 is specifically designed for measuring ε and tg δ at 1MHz. When used with WY914, the inductor should be connected from the back of the Q meter to the front
LK-2	0.5μH	±5%	two hundred and fifty	five
LK-3	1.0μH	±5%	two hundred and fifty	five
LK-4	1.5μH	±5%	two hundred	six
LK-5	10μH	±5%	two hundred	six
LK-6	2.5μH	±5%	two hundred	six
LK-7	100μH	±5%	one hundred and eighty	eight
LK-8	250μH	±5%	one hundred and eighty	eight
LK-9	380μH	±5%	one hundred and fifty	eight
LK-10	1mH	±5%	one hundred and fifty	eight

LKI-2 type inductor group