FCD Series Ultra High Voltage Electric Separable JackDetailed product description：

Basic parameters of ultra-high voltage electric separation jack:

model	Body height mm	Travel distance mm	Oil cylinder outer diameter mm	Piston rod diameter mm
FCD50	three hundred and twenty-five	one hundred and sixty	one hundred and twenty-eight	eighty
FCD100	three hundred and twenty-six	one hundred and sixty	one hundred and eighty-eight	one hundred
FCD100	three hundred and sixty-four	two hundred	one hundred and eighty-eight	one hundred
FCD150	three hundred and forty-five	one hundred and sixty	two hundred and twenty-eight	one hundred and thirty
FCD200	three hundred and fifty-five	two hundred	two hundred and forty-eight	one hundred and fifty
FCD320	four hundred and six	two hundred	three hundred and twenty-one	one hundred and eighty
FCD500	four hundred and thirty	three hundred	four hundred and twenty-eight	two hundred and forty

The parameters in the table may change due to improvements without prior notice.

2、 Purpose:

DYG ultra-high pressure electric separation jack (DQF, FCD): It has the characteristics of high output force, light weight, and long-distance operation. Paired with our factory's ultra-high pressure oil pump station, it can achieve various forms of operations such as pushing, pulling, and squeezing. It is widely used in various industries such as transportation, railways, bridges, shipbuilding, etc. In recent years, it has also been widely used in foundation settlement tests and static pile driving.

3、 Usage method

1. When the oil level of the pump body is insufficient, it is necessary to add working oil (10 # engine oil) to the pump before it can work.
2. Estimate the lifting capacity and avoid overloading during use.
3. Determine the center of gravity of the lifting object, select the point of force for the jack, and consider whether the ground is soft or hard and whether it is cushioned with tough wood to avoid the risk of tipping during lifting.
4. After the jack lifts the heavy object, it should be supported firmly with tough wood in a timely manner. It is forbidden to use the jack as a support to avoid uneven load and the risk of tipping.
5. When using, first connect the quick connector of the manual pump to the top, then select the position and tighten the oil drain screw on the oil pump to start working. Loosen the oil drain screw and unload the oil cylinder. 6. Please refer to the instruction manual for electric pumps.