The YGP series roller conveyor is equipped with a variable frequency speed regulating three-phase asynchronous motor (hereinafter referred to as the variable frequency roller conveyor motor), which is mainly used to drive the working roller conveyor or other similar machinery in the metallurgical industry separately. It is powered by a variable frequency converter and the control system composed of the variable frequency speed regulating device can achieve smooth stepless speed regulation of the motor. The variable speed mechanism is simple and the speed is accurate, which can achieve the purpose of energy saving and automation.

The YGP series variable frequency roller motor has high starting torque, strong overload capacity, low starting current, fast and stable starting, wide speed range, high precision, stable operation, and easy operation and maintenance.

The YGP series variable frequency roller motor is suitable for starting, braking, speed regulation and other working states, especially for mechanical equipment with frequent forward and reverse rotation, and can also be applied to other mechanical equipment.

The YGP series variable frequency roller motor is a closed type, self cooling type, with a cooling method of IC410; The protection level of the motor casing is IP54 or IP55; The electric motor adopts H-level insulation and is suitable for places where the ambient air temperature does not exceed 60 ℃.

The YGP series variable frequency roller motor can operate normally under the following working conditions.
1. Altitude not exceeding 1000m;
2. The maximum ambient air temperature shall not exceed 60 ℃;
3. Indoor areas with high levels of dust;
4. Frequent and significant mechanical vibrations and impacts;
5. Frequent starting, braking, and reversing.

The power of YGP series variable frequency roller motor is determined according to user requirements. The rated voltage of YGP series variable frequency roller motor is 380V, and the stator winding of the motor is Y-connected, which is suitable for frequency converter power supply. The rated frequency (i.e. fundamental frequency) of each aircraft base number can be selected by the user between 20-50Hz. The working characteristics of electric motors; Below the fundamental frequency is constant torque, above the fundamental frequency is constant power, and the frequency variation range is 3-100Hz. The standard working system of YGP series variable frequency roller motor is S5-60%.

The installation size of YGP series variable frequency roller motor below H225 is the same as YG series. H250~400 refers to the YZR series, except for shaft extension, the dimensions of A, B, C, and H are the same as the YZR series.