2-20T Horizontal jackDetailed product description：

Horizontal jack
Specification: 2T 3T 5T 8T 10T 20T

Lift up
1. Park the car on the parking lot, apply the brakes and block the wheels.
2. Tighten the release valve clockwise with the handle
3. The jack tray should be placed under the correct lifting position of the load, and the handle should be operated up and down until the tray contacts the load.
4. Lift the load to the desired height and place the safety bracket in the correct position under the load, then transfer the load to the safety bracket and remove the jack.

5. After repair, use a jack to lift the load and then remove the safety bracket. Slowly rotate the handle counterclockwise and release the release valve to smoothly lower the tray. The release valve should not be loosened more than one turn.

Warning: Do not drag the jack when it is in working condition.

Important notice: Sometimes during storage, transportation, and use, air may enter the hydraulic system and affect the normal operation of the jack. In this case, air should be discharged.
Drain the air from the hydraulic system: 1. Remove the cover plate and open the oil plug to allow the air to escape. 2. Rotate counterclockwise to release the valve. 3. Lift the handle up and down several times. Close the release valve and replace the cover plate. The jack can now operate normally.