TGRY Silver plated copper-clad steel wireDetailed product description：

Silver plated copper-clad steel wire
Execution standard: Q (L)/YM011-2004
Model: TGRY
Scope of application: This product is suitable for the conductive core and metal braiding of high-temperature RF communication cables. Copper clad steel cores should use 40A series annealed flexible wire cores.
Specifications and technical parameters:

Specification mm	Silver content%	Line diameter tolerance mm	The elongation at break is greater than%	tensile strength Not less than n/mm2	DC resistance+20 ℃ Not greater than Ω/m
zero point nine two	one point two five	±0.015	ten	three hundred and fifty-two	zero point zero six six
zero point nine three	one point two five	±0.015	ten	three hundred and fifty-two	zero point zero six five
zero point nine four	one point two five	±0.015	ten	three hundred and fifty-two	zero point zero six three
zero point eight	one point two five	±0.01	ten	three hundred and fifty-two	zero point zero eight seven
zero point five one	two	±0.01	ten	three hundred and fifty-two	zero point two one five
zero point two nine	zero point five	±0.01	ten	three hundred and fifty-two	zero point six six
zero point two	three point five	±0.05	ten	three hundred and fifty-two	one point four
zero point one	six point one	±0.03	ten	three hundred and fifty-two	five point six
zero point one seven	four	±0.05	ten	three hundred and fifty-two	one point nine

Note: The thickness of the silver plating layer is related to the silver content and can be selected according to user requirements. The continuity test of the coating shall not be conducted when the corresponding thickness is less than 1.2 μ m.
The base material is copper-clad steel wire, and its product quality and characteristics should comply with the requirements of ASTM B452, Class 40A (40% nominal conductivity, soft state, 0.04397 Ω mm2/m).
The thickness of the copper layer should not be less than 10% of the radius of the steel wire.