YCTD series electromagnetic speed regulating motorDetailed product description：

The YCTD series low resistance end ring electromagnetic speed control motor adopts low resistance end ring technology on its armature. Compared with the YCT and JZTY series, motors of the same power need to be reduced by 1-2 machine base sizes, and the rated maximum speed is increased by 4.2-10%. It has the advantages of high efficiency, small size, light weight, and low noise. The efficiency is increased by 5% -10% compared to the YCT series, and the upper limit speed is increased to 1400r/min or even higher. It is an updated generation product based on the YCT and YZTy series.

The YCTD series electromagnetic speed regulating motor is mainly suitable for stepless speed regulation of constant torque loads. It is also suitable for stepless speed regulation of constant torque loads. It is also suitable for stepless speed regulation of decreasing torque loads such as fans and pumps, with significant energy-saving effects, and widely used in various fields such as metallurgy, electricity, petroleum, chemical industry, machinery, etc. It has been included in the 12th batch of energy-saving new product projects by seven ministries including the National Economic and Trade Commission.

Working conditions:
Rated voltage: 380V, 50Hz (controller 220V single-phase)
Altitude not exceeding 1000M
The ambient temperature shall not exceed 40 ℃, and the minimum temperature shall be -15 ℃
Relative humidity not exceeding 90%
Less dust, no ferromagnetic material dust, no corrosive metals, gases that damage insulation, and explosive gases.
Protection level: IP21
Cooling method: IC01
Installation type: IMB3
Control device:
The YCTD series electromagnetic speed regulating motor can be equipped with various control devices to achieve single manual control, automatic control, multiple synchronous control or proportional control.

YCTD series electromagnetic speed regulating motor specifications and main technical parameters:

model *	rated power （kw）**	rated torque （N.m）	speed regulation range （r/min）	rate of speed change ***	weight kg
90-4A 4B	zero point two five	one point five five	1200-120	When combined with controllers of different models, two different rates of speed change can be achieved Level I is 1% Level II is 2.5%	forty-one
	zero point three seven	two point three			forty-two
100-4A 4B	zero point five five	three point six	1250-100		fifty-four
	zero point seven five	four point nine			fifty-five
112-4A 4B	one point one	seven point one			sixty-seven
	one point five	nine point seven			seventy-one
132-4A 4B 4C	two point two	fourteen point one	1300-100		one hundred
	three	nineteen point two			one hundred and four
	four	twenty-five point two			one hundred and eighteen
160-4A 4B	five point five	thirty-five point one	1350-100		two hundred and five
	seven point five	forty-seven point seven			two hundred and eighteen
180-4A 4B	eleven	sixty-nine			three hundred and nine
	fifteen	ninety-four			three hundred and nine
200-4A 4B	eighteen point five	one hundred and sixteen	1375-400		four hundred and fifty
	twenty-two	one hundred and thirty-seven			four hundred and fifty
225-4A	thirty	one hundred and eighty-nine			five hundred and fifty
250-4A 4B	thirty-seven	two hundred and thirty-two			six hundred and five
	forty-five	two hundred and eighty-two			six hundred and five
280-4A	fifty-five	three hundred and forty-four	1400-600		nine hundred and thirty
315-4A 4B	seventy-five	four hundred and sixty-nine			one thousand three hundred and two
	ninety	five hundred and sixty-four			one thousand four hundred and twenty-two
355-4A 4B	one hundred and ten	six hundred and eighty-eight			one thousand and seven hundred
	one hundred and thirty-two	eight hundred and twenty-one			two thousand
400-4A 4B 4D 4D	one hundred and sixty	one thousand and two	1420-250
	one hundred and eighty-five	one thousand one hundred and fifty-eight
	two hundred	one thousand two hundred and fifty-two
	two hundred and twenty	one thousand three hundred and seventy-eight

Note:
The model in Table 1 is equipped with a 4-stage drag motor, and can be designed with 2-stage, 6-stage, and 8-stage drag motors according to user needs.
The nominal power is the rated output power of the driving motor. When selecting, users should choose the correct torque according to the load system requirements. When selecting, they should choose according to the rated torque column in the table, not according to the nominal power.
Speed change rate=(speed at 10% rated torque - speed at rated torque)/rated maximum speed x 100%

Main installation dimensions and external dimensions of YCTD series electromagnetic speed regulating motor (mm)

frame size

installation dimensions

Overall dimensions

A

A/2

WB

WC

D

E

F

G

H

K

AB

AD

HD

L

90-4A 4B

one hundred and sixty

eighty

one hundred and seventy-eight

forty

eighteen

forty

six

fourteen point five

ninety

twelve

one hundred and ninety-four

ninety-seven

two hundred and twenty-six

four hundred and fifty-five

100-4A 4B

one hundred and sixty

eighty

two hundred and three

forty

nineteen

forty

six

fifteen point five

one hundred

twelve

two hundred and ten

one hundred and fifty

two hundred and sixty-five

five hundred and ten

112-4A 4B

one hundred and ninety

ninety-five

two hundred and twenty-eight

forty-five

twenty-four

fifty

eight

twenty

one hundred and twelve

twelve

two hundred and sixty

one hundred and fifty-five

two hundred and seventy-six

six hundred and forty

132-4A 4B

two hundred and sixteen

one hundred and eight

two hundred and sixty-seven

forty-five

twenty-eight

sixty

eight

twenty-four

one hundred and thirty-two

twelve

three hundred and five

one hundred and ninety-five

three hundred and forty-five

six hundred and eighty-five

160-4A 4B

two hundred and seventy-nine

one hundred and thirty-nine point five

three hundred and five

seventy

thirty-eight

eighty

ten

thirty-three

one hundred and sixty

nineteen

three hundred and fifty-five

two hundred and ten

three hundred and fifty

eight hundred and thirty-five

180-4A 4B

three hundred and eighteen

one hundred and fifty-nine

three hundred and sixty-eight

seventy

forty-two

one hundred and ten

twelve

thirty-seven

one hundred and eighty

nineteen

four hundred and thirty-five

two hundred and sixty

four hundred and sixty

one thousand and seventy-five

200-4A 4B

three hundred and fifty-six

one hundred and seventy-eight

four hundred and fifty-seven

eighty-nine

forty-eight

one hundred and ten

fourteen

forty-two point five

two hundred

twenty-four

four hundred and sixty-five

two hundred and ninety

four hundred and ninety-five

one thousand one hundred and sixty-five

225-4A

four hundred and six

two hundred and three

five hundred

eighty-nine

fifty-five

one hundred and ten

sixteen

forty-nine

two hundred and twenty-five

twenty-four

five hundred and twenty-five

three hundred and fifteen

five hundred and fifty-five

one thousand two hundred and forty

250-4A 4B

four hundred and six

two hundred and three

four hundred and fifty-seven

eighty-nine

sixty

one hundred and forty

eighteen

fifty-three

two hundred and fifty

twenty-eight

five hundred and twenty-five

three hundred and fifty

five hundred and seventy-five

one thousand four hundred and eighty-five

280-4A

four hundred and fifty-seven

two hundred and twenty-eight point five

five hundred and eight

eighty-nine

sixty-five

one hundred and forty

eighteen

fifty-eight

two hundred and eighty

twenty-eight

six hundred

three hundred and ninety

six hundred and fifty

one thousand four hundred and eighty-five

315-4A 4B

five hundred and eight

two hundred and fifty-four

five hundred and sixty

eighty-nine

seventy-five

one hundred and forty

twenty

sixty-seven point five

three hundred and fifteen

twenty-eight

six hundred and seventy-five

four hundred and fifteen

seven hundred and eighty-five

one thousand six hundred and fifty-five

355-4A 4B

six hundred and ten

three hundred and five

six hundred and thirty

one hundred and eight

eighty

one hundred and seventy

twenty-two

seventy-one

three hundred and fifty-five

twenty-eight

seventy

four hundred and ten five hundred and thirty

eight hundred

one thousand and seven hundred one thousand eight hundred and sixty

400-4A 4B 4C 4D

six hundred and eighty-six

three hundred and forty-three

nine hundred

one hundred and twenty-one

ninety

one hundred and seventy

twenty-five

eighty-one

four hundred

thirty-five

eight hundred and thirty

five hundred and eighty-six

nine hundred and sixty

two thousand eight hundred and thirty