XKGKL type current limiting reactorDetailed product description：

The XKGKL type current limiting reactor is connected in series on the system. When the system fails, it is used to limit the short-circuit current and reduce it to the allowable value of the subsequent equipment.

characteristic
1. The XKGKL type current limiting reactor is a hollow coil supported by post insulators, and the coil is molded into a rigid body by impregnating epoxy resin with glass fiber.
2. The inductance value of the dry-type hollow current limiting reactor has good linearity. Can effectively suppress sudden surges.
3. The winding is made of various small section film wrapped wires, which have the characteristics of excellent insulation performance, low loss, light weight, small volume, and maintenance free.
5. The entire outer surface of the reactor is coated with an anti ultraviolet protective layer, which can be used both indoors and outdoors. The installation method is flexible, and it can be arranged horizontally in three phases. It can also be stacked in three phases with small capacity.

Model meaning

Environmental conditions for use
1. Installation location: indoor or outdoor.
2. Environmental temperature: -40 ℃~+40 ℃
3. Altitude: not exceeding 1000M
4. Maximum wind speed: 35m/s
5. The installation location should be free of corrosive gases, steam, conductive or explosive dust.
6. Anti pollution ability: The creepage distance of the external insulation shall not be less than 25mm/kV (relative to the maximum operating voltage of the system), and for heavily polluted areas, it can be taken as 35mm/kV.

XKGKL type current limiting reactor ordering parameters
1. Rated frequency 2. System voltage
3. Rated reactance rate 4. Rated current
5. Rated short-time current and duration 6. Dynamic stable current
7. Rated reactance value 8. Insulation level
9. Location of use: indoor or outdoor 10. Installation method and outlet angle