RX2-1000 Fused alarmDetailed product description：

Purpose:
The RX2-1000 fuse alarm is suitable for use as a fuse signal/alarm in electrical circuits with AC 50Hz and rated voltage up to 1000V.
Structural characteristics:
This series of fuse alarms consists of the following three parts:
1. Fused impact body
2. Micro switch (contacts are normally open and normally closed)
3. Support base for fuse impact body and micro switch

The fuse alarm is generally connected in parallel under the fixing screws of the cover plates at both ends of the fuse link. When the fuse link is blown, the fuse impact body will tightly move, pop out the impact pin, push the micro switch, and send out a signal or automatically switch the circuit. The distance between the two fixed (contact) ends on the base can be adjusted within a certain range to accommodate the parallel (fixed) connection of fuse links at different heights.

Technical parameters of RX2-1000 fuse alarm

Model of circuit breaker alarm	Combination product name	Rated voltage (V)	Dimensions (mm)						Weight (g)
			drawing number	L1	L2	D	d	A
RX2-1000	Fused impact body base	one thousand	thirteen point two	fifty-four point five	one hundred and fourteen	twenty-seven	twenty-two point five	41-88	forty-two