XB-CATV-BNC Video signal lightning arresterDetailed product description：

Function and application scope:
The XB-CATV-BNC video signal lightning arrester is produced from imported semiconductor devices, gas discharge tubes, and other components. It has the advantages of fast action time, low insertion loss, accurate clamping, and low output residual voltage. It can effectively suppress overvoltage pulses induced on the signal transmission line of the camera gun and protect video monitoring equipment from damage caused by overvoltage pulses. It is a new generation of video signal protection product.
This product is suitable for video surveillance equipment such as camera guns, video distributors, video matrix switchers, etc.

Technical Specifications:

model	XB-CATV-BNC
Nominal voltage U N	-6V/+1V
Maximum continuous operating voltage	-8V/+1.4V
Nominal discharge current I SN (8/20 μ s)	2.5kA (core wire/ground) 10kA (shielding/ground)
Input/output impedance	75Ω
response time	<1ns
insertion loss	≤ 0.5dB
bandwidth	200MHz
Data transmission rate	16Mbps
interface method	BNC

Installation and maintenance methods:
The grounding resistance should be less than 10 Ω and should be reliably grounded. The distance between grounding wires should be as short as possible, and wires with a diameter of ≥ 2.5mm2 should be selected for grounding wires.
Connect the XB-CATV-BNC video signal lightning arrester in series with the video circuit according to the interface.