XD1-40 type current limiting reactorDetailed product description：

XD1, XD2 series current limiting reactors
Overview
This series of products is suitable for installation in PGJ1 and other types of low-voltage reactive power automatic compensation screens with rated frequencies of 50HZ, 50HZ, and rated voltage of 380V, for limiting the input of capacitors into the melt current
Terms of Use
Sea wave height not exceeding 2000M
The ambient air temperature is not higher than+40 degrees Celsius and not lower than -5 degrees Celsius
When the air temperature is+20 degrees Celsius, the relative humidity should not exceed 90%
The surrounding medium is free of flammable materials, gases that damage insulation and corrode metals, and conductive dust
The installation location has no severe vibration or bumps, and the installation inclination is greater than 50 degrees;
The installation location is not directly exposed to sunlight, and there is no wind, snow, or severe mold present

Main technical parameters

Product Model	capacitance	rated voltage	rated current	Inductance value	Current limiting coefficient	Rated insulation level
XD1-12, XD2-12	twelve	three hundred and eighty	twenty-two point five	zero point zero three one five	fifty	0.38/3
XD1-14, XD2-14	fourteen		twenty-six point three	zero point zero two six
XD1-16, XD2-16	sixteen		thirty point zero two	zero point zero two three two
XD1-20	twenty		thirty-five point nine	zero point zero two zero four
XD1-25	twenty-five		forty-six point nine	zero point zero two one three
XD1-30	thirty		fifty-six point three	zero point zero two five
XD1-40	forty		seventy point eight	zero point zero three zero

XD1-40 type current limiting reactor