SZQ Lift type bearing sleeve heating disassemblerDetailed product description：

SZQ type bearing sleeve induction heating disassembler|

Energy saving bearing induction disassemblers are widely used in steel rolling mills, railway locomotive depots, ports, docks, and other industrial and mining enterprises. The new generation product for thermal disassembly of bearing inner rings, retaining rings, sealing rings, gears, couplings, etc. applies the principle of electromagnetic induction to generate induced current in the bearing inner ring, causing it to heat up and expand, thereby creating gaps at the mating area and achieving the purpose of easy disassembly. Due to the rapid, uniform, clean and pollution-free induction heating, high heating quality, and ensuring that bearings are not damaged, this advanced disassembly method is gradually replacing baking, oil boiling and other methods.  

1、 Main structure
This machine consists of a main control cabinet, induction coils, and other components.  

2、 Usage and Operation
1. Connect the control cabinet to a controlled power source.  
2. Connect the control cabinet to the induction coil with wires.  
3. Close the control switch, and the voltmeter should indicate.  
4. Insert the induction coil onto the bearing.  
5. Adjust the required heating time, press the start button to start heating. When the workpiece is heated to the required time, the host will automatically turn off the power or press the stop switch once.  
6. After heating, remove the induction coil and remove the bearing.  
7. This machine can be heated and stopped by a control cabinet or induction coil.  

3、 Technical parameters and performance

model	outer diameter	inner hole	wide	current voltage	Heating time 130 ℃
SZQ-Ⅰ	Φ320	Φ180	one hundred and sixty-eight	380V 65A (single-phase)	1.3 minutes
SZQ-Ⅱ	Φ185	Φ130	seventy-eight	380V 30A (single-phase)	1.5 minutes
SZQ-Ⅲ	Φ193	Φ160	one hundred and ninety-five	380V 60A (single-phase)	1.5 minutes
SZQ-Ⅳ	Φ191	Φ160	two hundred and twenty	380V 60A (single-phase)	1.3 minutes
SZQ-Ⅴ	Φ247	Φ170	eighty	380V 21A (single-phase)	1.6 minutes

4、 Precautions
1. This series of bearing induction disassemblers must be customized based on the specifications and dimensions of the heated workpiece provided by the user.  
2. Be careful when removing the workpiece to prevent burns.  
3. The heating component of the induction coil can only be removed after the host is powered off.

model	outer diameter	inner hole	wide	current voltage	Heating time 130 ℃
SZQ-Ⅰ	Φ320	Φ180	one hundred and sixty-eight	380V 65A (single-phase)	1.3 minutes
SZQ-Ⅱ	Φ185	Φ130	seventy-eight	380V 30A (single-phase)	1.5″
SZQ-Ⅲ	Φ193	Φ160	one hundred and ninety-five	380V 60A (single-phase)	1.5″
SZQ-Ⅳ	Φ191	Φ160	two hundred and twenty	380V 60A (single-phase)	1.3″
SZQ-Ⅴ	Φ247	Φ170	eighty	380V 21A (single-phase)	1.6″