JQC-24F Automotive RelayDetailed product description：

JQC-24F Automotive Relay

contact form	1H (1A), 1Z (1C)
contact resistance	100mΩ (1A 6VDC)
Contact material	Silver Alloy
Contact load (resistive)	1H　30A 14VDC 1Z25A/14VDC
Maximum switching current	30 A
Maximum switching power	420 W
Maximum switching voltage	75 VDC
mechanical life	1×10seventime
electrical life	5×10fourtime

performance parameters
Insulation resistance 100M Ω, 500VDC
1000VAC 1min between the dielectric withstand voltage contact and the coil
Disconnect 750VAC between contacts for 1 minute
Action time Max: 15ms
Release time Max: 5ms
Coil temperature rise (at rated voltage) Max: 60 ℃
Temperature range -40 ℃ to+85 ℃
Impact stability 98m/s2
Intensity 980m/s2
Vibration double amplitude: 1.5mm 10-55Hz
Humidity 35%~85% RH
Temperature range -40%+85 ℃
Lead out terminal form: printed board lead out terminal
Weight approximately g
Packaging method: non plastic sealed type without dust cover shell

Coil parameters
Rated coil power 0 9 W

JQC-24F Automotive Relay Coil Specification Table

Rated voltage VDC	Action voltage VDC	Release voltage VDC	Maximum voltage VDC	Coil resistance Ω
six	four point two	zero point six	seven point two	40±10%
nine	six point three	zero point nine	ten point eight	90±10%
twelve	eight point four	one point two	fourteen point four	160±10%
twenty-four	sixteen point eight	two point four	twenty-eight point eight	640±10%
thirty-six	twenty-five point two	three point six	forty-three point two	1440±10%
forty-eight	thirty-three point six	four point eight	fifty-seven point six	2560±10%

JQC-24F Automotive Relay Marking

Marked Example	JQC-24F /12VDC-1HT
relay model	JQC- 24F
coil voltage	3 5 6 9 12 18 24 48VDC
contact form	1H: One set of normally open 1Z: One set of conversion
packaging method	S: Plastic sealed type without: no dust cover shell
Contact material	T: AgSn02 None: AgCdO

wiring diagram