KTJ6 series AC cam controllerDetailed product description：

The KTJ6 and KT12A series AC cam control are used in circuits with AC 50HZ voltage of 380V, mainly for the starting speed regulation and commutation of lifting motors.

Technical data and installation dimensions

model	Rated current (ampere)	Rated voltage (volts)	At a power on standby rate of 25%, the maximum power (watts) of the controlled motor is 380 volts	Installation size (millimeters)
KTJ6 KTJ12A -25/1	twenty-five	three hundred and eighty	12．5	208×170
KTJ6 KTJ12A -25/2	twenty-five	three hundred and eighty	2×6．3	283×170
KTJ6 KTJ12A -25/3	twenty-five	three hundred and eighty	eight	208×170
KTJ6 KTJ12A -60/1	sixty	three hundred and eighty	thirty-two	208×170
KTJ6 KTJ12A -60/2	sixty	three hundred and eighty	2×16	283×170
KTJ6 KTJ12A -60/3	sixty	three hundred and eighty	2×25	223×170

Electrical schematic diagram

Note: In a multi motor drive system, the contacts "1" and "2" of other controllers are connected to this circuit.
2. In a multi motor drive system, the contacts "3", "4", and "5" of the endpoint switch and other controllers



Note: In a multi motor drive system, the contacts "1" and "2" of other controllers are connected to this circuit.
2. In a multi motor drive system, the contacts "3", "4", and "5" of the endpoint switch and other controllers

Note: In a multi motor drive system,
The contacts "1" and "2" of other controllers are connected to this circuit. Note: In a multi motor drive system, the contacts "1" and "2" of other controllers are connected to this circuit.
2. In a multi motor drive system, the contacts "3", "4", and "5" of the terminal switch and other controllers are connected to the circuit.

KTJ6 series AC cam controller ordering instructions

When placing an order, it is necessary to specify: 1. Operation method: (handwheel or handle). 2. Model and name of the controller